either direct link to these basic predefined types, or a combination of them.
Anyway, the first items in the datatype list belong to OPAL, the second round
are MPI datatypes created by composing basic OPAL datatypes, and the last
batch are mapped datatype (direct correspondance between an OMPI datatype and
an OPAL one such as int -> int32_t).
Modify the op to fit this new scheme.
This commit was SVN r24247.
step is the configure and Fortran mojo that Jeff will put in. Until then I
guess the Fortran interface is broken (at least all functions using the hidden
count firld in the MPI_Status).
This commit was SVN r23467.
from "MPI_*_errhandler_fn" to "MPI_*_errhandler_function" (and their
corresponding C++ types, too). Also updated the corresponding man
pages, and marked the typedefs to the now-deprecated types as
deprecated.
This commit was SVN r22122.
The following Trac tickets were found above:
Ticket 2060 --> https://svn.open-mpi.org/trac/ompi/ticket/2060
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
not end up in OPAL
- Will post an updated patch for the OMPI_ALIGNMENT_ parts (within C).
This commit was SVN r21342.
The following SVN revision numbers were found above:
r21330 --> open-mpi/ompi@95596d1814
MTT caught builds failing with the following error which flagged the problem:
{{{
param.cc:802: error: ‘MPI_MAX_DATAREP_STRING’ was not declared in this scope
}}}
This commit was SVN r21337.
The following SVN revision numbers were found above:
r21308 --> open-mpi/ompi@2f9765926e
into the OPAL namespace, eliminating cases like opal/util/arch.c
testing for ompi_fortran_logical_t.
As this is processor- and compiler-related information
(e.g. does the compiler/architecture support REAL*16)
this should have been on the OPAL layer.
- Unifies f77 code using MPI_Flogical instead of opal_fortran_logical_t
- Tested locally (Linux/x86-64) with mpich and intel testsuite
but would like to get this week-ends MTT output
- PLEASE NOTE: configure-internal macro-names and
ompi_cv_ variables have not been changed, so that
external platform (not in contrib/) files still work.
This commit was SVN r21330.
MPI_MAX_PROCESSOR_NAME
MPI_MAX_ERROR_STRING
MPI_MAX_OBJECT_NAME
MPI_MAX_INFO_KEY
MPI_MAX_INFO_VAL
MPI_MAX_PORT_NAME
MPI_MAX_DATAREP_STRING
Defaults stay as theyr currently are -- and now give an explanation on the
min/max values being used in a central place...
m4-macro _OPAL_WITH_OPTION_MIN_MAX_VALUE may be benefical in other parts
of the configure system.
- We need some of these in the lower level OPAL for an upcoming commit!
All other levels base their values on them.
This commit was SVN r21292.
functionality (per MPI-2.1). This warning can be toggled using
--enable-mpi-interface-warning (default OFF), but can be
selectively turned on passing
mpicc -DOMPI_WANT_MPI_INTERFACE_WARNING
Using icc, gcc < 4.5, warnings (such as in mpi2basic_tests) show:
type_vector.c:83: warning: ‘MPI_Type_hvector’ is deprecated
(declared at /home/../usr/include/mpi.h:1379)
Using gcc-4.5 (gcc-svn) these show up as:
type_vector.c:83: warning: ‘MPI_Type_hvector’ is deprecated
(declared at /home/../usr/include/mpi.h:1379):
MPI_Type_hvector is superseded by MPI_Type_create_hvector in MPI-2.0
Jeff and I propose to turn such warnings on with Open MPI-1.7 by default.
- Detection of user-level compiler is handled using the preprocessor
checks of GASnet's other/portable_platform.h (thanks to Paul Hargrove
and Dan Bonachea) adapted into ompi/include/mpi_portable_platform.h
(see comments).
The OMPI-build time detection is output (Familyname and Version)
with ompi_info.
This functionality (actually any upcoming __attribute__) are turned
off, if a different compiler (and version) is being detected.
- Note, that any warnings regarding (user-compiler!=build-compiler)
as discussed in the RFC are _not_ included for now.
- Tested on Linux with --enable-mpi-interface-warning on
Linux, gcc-4.5 (deprecated w/ specific msg)
Linux, gcc-4.3 (deprecated w/o specific msg)
Linux, pathscale 3.1 (deprecated w/o specific msg)
Linux, icc-11.0 (deprecated w/o specific msg)
Linux, PGI-8.0.6 accepts __deprecated__ but does not issue a warning,
further investigation needed...
This commit was SVN r21262.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
* New "op" MPI layer framework
* Addition of the MPI_REDUCE_LOCAL proposed function (for MPI-2.2)
= Op framework =
Add new "op" framework in the ompi layer. This framework replaces the
hard-coded MPI_Op back-end functions for (MPI_Op, MPI_Datatype) tuples
for pre-defined MPI_Ops, allowing components and modules to provide
the back-end functions. The intent is that components can be written
to take advantage of hardware acceleration (GPU, FPGA, specialized CPU
instructions, etc.). Similar to other frameworks, components are
intended to be able to discover at run-time if they can be used, and
if so, elect themselves to be selected (or disqualify themselves from
selection if they cannot run). If specialized hardware is not
available, there is a default set of functions that will automatically
be used.
This framework is ''not'' used for user-defined MPI_Ops.
The new op framework is similar to the existing coll framework, in
that the final set of function pointers that are used on any given
intrinsic MPI_Op can be a mixed bag of function pointers, potentially
coming from multiple different op modules. This allows for hardware
that only supports some of the operations, not all of them (e.g., a
GPU that only supports single-precision operations).
All the hard-coded back-end MPI_Op functions for (MPI_Op,
MPI_Datatype) tuples still exist, but unlike coll, they're in the
framework base (vs. being in a separate "basic" component) and are
automatically used if no component is found at runtime that provides a
module with the necessary function pointers.
There is an "example" op component that will hopefully be useful to
those writing meaningful op components. It is currently
.ompi_ignore'd so that it doesn't impinge on other developers (it's
somewhat chatty in terms of opal_output() so that you can tell when
its functions have been invoked). See the README file in the example
op component directory. Developers of new op components are
encouraged to look at the following wiki pages:
https://svn.open-mpi.org/trac/ompi/wiki/devel/Autogenhttps://svn.open-mpi.org/trac/ompi/wiki/devel/CreateComponenthttps://svn.open-mpi.org/trac/ompi/wiki/devel/CreateFramework
= MPI_REDUCE_LOCAL =
Part of the MPI-2.2 proposal listed here:
https://svn.mpi-forum.org/trac/mpi-forum-web/ticket/24
is to add a new function named MPI_REDUCE_LOCAL. It is very easy to
implement, so I added it (also because it makes testing the op
framework pretty easy -- you can do it in serial rather than via
parallel reductions). There's even a man page!
This commit was SVN r20280.
Rationale:
1. This value has already changed since v1.2 (v1.2 MPI_MAX_PORT_NAME
== 36). Hence, this commit simply increases the value from a
previous change.
1. The changes does increase OMPI's memory footprint slightly, but
only when using MPI-2 dynamics. So it is expected that the change
will have minimal impact on the overall footprint.
1. The change is helpful for nodes that have 4 or more IP networks
(e.g., regular ethernet and multiple IP-over-<pick your favorite
high-speed network> networks). Without this change, invoking
MPI_COMM_SPAWN on hosts with 4 or more IP networks will fail
because we'll exceed 256 bytes for the port name. Some OMPI
developer test clusters already have this kind of configuration
(e.g., Cisco); it is expected that this is not too common in the
real world yet, but with "manycore" coming, having multiple
IP-based networks in a single server will likely become more
common.
This commit was SVN r19638.
This fixes trac:1477.
Help provided by Jeff and Terry.
This commit was SVN r19533.
The following Trac tickets were found above:
Ticket 1477 --> https://svn.open-mpi.org/trac/ompi/ticket/1477
* Various changes to enable 0-dimensional cartesian communicators:
* Set various mtc_* members to NULL when there are 0 dimensions (and
don't bother trying to memcpy these arrays when duplicating the
communicator -- because they're NULL)
* adjust topo_base_cart_sub to correctly handle 0 dimensions
(simplified it a bit)
* adjust a few error codes to return ERR_OUT_OF_RESOURCE
* adjust error checking of CART_CREATE, CART_RANK
* Allow MPI_GRAPH_CREATE to accept 0 == nnodes.
* Bump reported MPI version in mpi.h to 2.1
This commit was SVN r19461.
The following Trac tickets were found above:
Ticket 1236 --> https://svn.open-mpi.org/trac/ompi/ticket/1236
This commit brings over all the work from the /tmp-public/datarep
branch. See commits r16855, r16859, r16860 for the highlights of what
was done.
This commit was SVN r16891.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r16855
r16859
r16860
The following Trac tickets were found above:
Ticket 1029 --> https://svn.open-mpi.org/trac/ompi/ticket/1029
to make checks for MPI-implementations fail in the right way ,-]
- check in configure.ac
- BINARY INCOMPATIBLE change to mpif-common.h
(if implemented the *right* way)
Actually OMPI_F90_CHECK takes two arguments, not three.
- Only have corresponding C-Type, if the opt. Fortran
type is really supported,
Otherwise pass ompi_mpi_unavailable to DECLARE_MPI_SYNONYM_DDT;
- Reviewed by George and Jeff
This commit was SVN r15133.
via the visibility feature that is provided by some compilers.
Per default this feature is disabled, to enable it you need to
configure with --enable-visibility and obviously you need a compiler
with visibility support. Please refer to the wiki for more information.
https://svn.open-mpi.org/trac/ompi/wiki/Visibility
This commit was SVN r14582.
provide one for the internals of Open MPI. For mpi.h, typedef MPI_Aint
either to ptrdiff_t or whatever we used as ptrdiff_t if that type doesn't
actually exist.
This commit was SVN r12212.
The following SVN revision numbers were found above:
r12146 --> open-mpi/ompi@8852c00c36
size and diplacement of data-type. After this patch all data can contain size_t bytes
and the displacements are defined as ptrdiff_t. All of the files I was able to compile
have been modified to match this requirement.
This commit was SVN r12146.
some issues with the C #defines SEEK_{SET, END, POS}. The workaround
involves some hackery that should work in almost every common use case
for the C stdio constants (and all the legal issues of the MPI constants).
The one issue is that the C stdio constants are now const ints instead
of #defines, which means that #ifdef checks will fail for the constants.
Behavior can be disabled at either configure time or build time.
Refs trac:387
This commit was SVN r12121.
The following Trac tickets were found above:
Ticket 387 --> https://svn.open-mpi.org/trac/ompi/ticket/387
releases on Linux and OS X) don't handle const_cast<> of 2-dimensional
arrays properly. If we're using one of the compilers that isn't friendly
to such casts, fall back to a standard C-style cast.
refs: #271
This commit was SVN r11263.
with MPI_WIN_NULL and the Fortran bindings.
It appears I had already done this, since all the infrastructure was already
in place. I probably edited mpi.h instead of mpi.h.in. Sigh.
This commit was SVN r9228.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
