needed in the global scope ($ompi_check_fca_dir). This commit removes
it from the OPAL_VAR_SCOPE, so it should be fixed now.
Sorry about that, folks! :-(
This commit was SVN r29838.
The following SVN revision numbers were found above:
r29830 --> open-mpi/ompi@3bd9c603ff
This is helpful in the work for #3694: ensure that many places that
eventually end up in configure don't overly-pollute the global shell
variable space (because debugging accidental shell variable pollution
can be a real pain).
Refs trac:3694
This commit was SVN r29830.
The following Trac tickets were found above:
Ticket 3694 --> https://svn.open-mpi.org/trac/ompi/ticket/3694
This prevents bazillions of warnings from clang tha -Wno-long-double
isn't supported.
The warning that clang issues when it see -Wno-long-double is does not
use any of the words we were looking for, so I added "unknown" to the
list of words to look for. I also re-indented the two m4 tests so
that they're a bit more readable.
cmr=v1.7.4:reviewer=brbarret:subject=Update -Wno-long-double test to support clang
This commit was SVN r29681.
patch. See ticket #3885, comment 10 for an explination of why calling
_STRINGIFY on something that's not a numerical constant is always a bad idea.
This commit was SVN r29613.
The following SVN revision numbers were found above:
r29608 --> open-mpi/ompi@b71bd51cdd
OSX atomic support is disabled by default. Enable with --enable-osx-builtin-atomics.
Fixes trac:2120
This commit was SVN r29568.
The following Trac tickets were found above:
Ticket 2120 --> https://svn.open-mpi.org/trac/ompi/ticket/2120
Apologies for the breakage, I did my test build in the wrong window...
No reviewer.
cmr=v1.7.4:ticket=3865
This commit was SVN r29492.
The following SVN revision numbers were found above:
r29488 --> open-mpi/ompi@25dd719d4d
The following Trac tickets were found above:
Ticket 3865 --> https://svn.open-mpi.org/trac/ompi/ticket/3865
First cut does not attempt any "cross-check". As we discover compilers
which complain about __noinline__, we will add specific cross checks to
handle those cases.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29488.
Reworked ompi_info tool to be close with orte_info implementation.
ompi_info_register_types(), ompi_info_close_components() and
ompi_info_show_ompi_version() are moved to runtime/ompi_info_support.c.
Added runtime/oshmem_info_support layer that exports following api to be
used into oshmem_info tool as
oshmem_info_register_types()
oshmem_info_register_framework_params()
oshmem_info_close_components()
oshmem_info_show_oshmem_version()
These functions call ompi_info_support related interfaces as long as
Oshmem supports Open MPI/SHMEM combination.
Now orte_info/ompi_info/oshmem_info have identical implementation approach.
Possible improvement:
OSHMEM processing of --config option is the same as OMPI`s (code is duplicated).
Probably list of info_support interfaces can be extended by xxx_info_do_config().
developed by Igor, reviewed by miked
This commit was SVN r29429.
(http://www.open-mpi.org/community/lists/devel/2013/09/12889.php), I
renamed all "f77" and "f90" directory/file names to "fortran"
(including removing shmemf77 / shmemf90 wrapper compilers and
replacing them with "shmemfort").
2. Fixed several Fortran coding errors.
3. Removed lots of old/stale comments that were clearly the result of
copying from the OMPI layer and then not cleaning up afterwards (i.e.,
the comments were wholly inaccurate in the oshmem layer).
4. Removed both redundant and harmful code from oshmem_config.h.in.
5. Temporarily slave building the oshmem Fortran bindings to
--enable-mpi-fortran. This doesn't seem like a good long-term
solution, but at least you can now build all Fortran bindings (MPI +
oshmem) or not. *** SEE MY NOTE IN config/oshmem_configure_options.m4
FOR WORK THAT STILL NEEDS TO BE DONE!
This commit was SVN r29165.
configure-time dynamic allocation of flags. The net result for platforms
which only support BTL-based communication is a reduction of 8*nprocs bytes
per process. Platforms which support both MTLs and BTLs will not see
a space reduction, but will now be able to safely run both the MTL and BTL
side-by-side, which will prove useful.
This commit was SVN r29100.
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
Commit r27211 missed a config file change which broke ompi over
iwarp transports.
This fixes trac:3726 and should be added to cmr:v1.7.3:reviewer=jsquyres
This commit was SVN r29049.
The following SVN revision numbers were found above:
r27211 --> open-mpi/ompi@b27862e5c7
The following Trac tickets were found above:
Ticket 3726 --> https://svn.open-mpi.org/trac/ompi/ticket/3726
