for dynamic selection of cpc methods based on what is available. It
also allows for inclusion/exclusions of methods. It even futher allows
for modifying the priorities of certain cpc methods to better determine
the optimal cpc method.
This patch also contains XRC compile time disablement (per Jeff's
patch).
At a high level, the cpc selections works by walking through each cpc
and allowing it to test to see if it is permissable to run on this
mpirun. It returns a priority if it is permissable or a -1 if not. All
of the cpc names and priorities are rolled into a string. This string
is then encapsulated in a message and passed around all the ompi
processes. Once received and unpacked, the list received is compared
to a local copy of the list. The connection method is chosen by
comparing the lists passed around to all nodes via modex with the list
generated locally. Any non-negative number is a potentially valid
connection method. The method below of determining the optimal
connection method is to take the cross-section of the two lists. The
highest single value (and the other side being non-negative) is selected
as the cpc method.
svn merge -r 16948:17128 https://svn.open-mpi.org/svn/ompi/tmp-public/openib-cpc/ .
This commit was SVN r17138.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
the ompi_convertor_need_buffers function to only return 0 if the convertor
is homogeneous (which it never does on the trunk, but does to on v1.2, but
that's a different issue). Only enable the heterogeneous rdma code for
a btl if it supports it (via a flag), as some btls need some work for this
to work properly. Currently only TCP and OpenIB extensively tested
This commit was SVN r15990.
* bml.h had a change that introduced a variable named "_order" to
avoid a conflict with a local variable. The namespace starting
with _ belongs to the os/compiler/kernel/not us. So we can't start
symbols with _. So I replaced it with arg_order, and also updated
the threaded equivalent of the macro that was modified.
* in btl_openib_proc.c, one opal_output accidentally had its string
reverted from "ompi_modex_recv..." to
"mca_pml_base_modex_recv....". This was fixed.
* The change to ompi/runtime/ompi_preconnect.c was entirely
reverted; it was an artifact of debugging.
This commit was SVN r15475.
The following SVN revision numbers were found above:
r15474 --> open-mpi/ompi@8ace07efed
1. Galen's fine-grain control of queue pair resources in the openib
BTL.
1. Pasha's new implementation of asychronous HCA event handling.
Pasha's new implementation doesn't take much explanation, but the new
"multifrag" stuff does.
Note that "svn merge" was not used to bring this new code from the
/tmp/ib_multifrag branch -- something Bad happened in the periodic
trunk pulls on that branch making an actual merge back to the trunk
effectively impossible (i.e., lots and lots of arbitrary conflicts and
artifical changes). :-(
== Fine-grain control of queue pair resources ==
Galen's fine-grain control of queue pair resources to the OpenIB BTL
(thanks to Gleb for fixing broken code and providing additional
functionality, Pasha for finding broken code, and Jeff for doing all
the svn work and regression testing).
Prior to this commit, the OpenIB BTL created two queue pairs: one for
eager size fragments and one for max send size fragments. When the
use of the shared receive queue (SRQ) was specified (via "-mca
btl_openib_use_srq 1"), these QPs would use a shared receive queue for
receive buffers instead of the default per-peer (PP) receive queues
and buffers. One consequence of this design is that receive buffer
utilization (the size of the data received as a percentage of the
receive buffer used for the data) was quite poor for a number of
applications.
The new design allows multiple QPs to be specified at runtime. Each
QP can be setup to use PP or SRQ receive buffers as well as giving
fine-grained control over receive buffer size, number of receive
buffers to post, when to replenish the receive queue (low water mark)
and for SRQ QPs, the number of outstanding sends can also be
specified. The following is an example of the syntax to describe QPs
to the OpenIB BTL using the new MCA parameter btl_openib_receive_queues:
{{{
-mca btl_openib_receive_queues \
"P,128,16,4;S,1024,256,128,32;S,4096,256,128,32;S,65536,256,128,32"
}}}
Each QP description is delimited by ";" (semicolon) with individual
fields of the QP description delimited by "," (comma). The above
example therefore describes 4 QPs.
The first QP is:
P,128,16,4
Meaning: per-peer receive buffer QPs are indicated by a starting field
of "P"; the first QP (shown above) is therefore a per-peer based QP.
The second field indicates the size of the receive buffer in bytes
(128 bytes). The third field indicates the number of receive buffers
to allocate to the QP (16). The fourth field indicates the low
watermark for receive buffers at which time the BTL will repost
receive buffers to the QP (4).
The second QP is:
S,1024,256,128,32
Shared receive queue based QPs are indicated by a starting field of
"S"; the second QP (shown above) is therefore a shared receive queue
based QP. The second, third and fourth fields are the same as in the
per-peer based QP. The fifth field is the number of outstanding sends
that are allowed at a given time on the QP (32). This provides a
"good enough" mechanism of flow control for some regular communication
patterns.
QPs MUST be specified in ascending receive buffer size order. This
requirement may be removed prior to 1.3 release.
This commit was SVN r15474.
than just the PML/BTLs these days. Also clean up the code so that it
handles the situation where not all nodes register information for a given
node (rather than just spinning until that node sends information, like
we do today).
Includes r15234 and r15265 from the /tmp/bwb-modex branch.
This commit was SVN r15310.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15234
r15265
relative bandwidths of each BTL. Precalculate what part of a message should
be send via each BTL in advance instead of doing it during scheduling.
This commit was SVN r15248.
This is required to tighten up the BTL semantics. Ordering is not guaranteed,
but, if the BTL returns a order tag in a descriptor (other than
MCA_BTL_NO_ORDER) then we may request another descriptor that will obey
ordering w.r.t. to the other descriptor.
This will allow sane behavior for RDMA networks, where local completion of an
RDMA operation on the active side does not imply remote completion on the
passive side. If we send a FIN message after local completion and the FIN is
not ordered w.r.t. the RDMA operation then badness may occur as the passive
side may now try to deregister the memory and the RDMA operation may still be
pending on the passive side.
Note that this has no impact on networks that don't suffer from this
limitation as the ORDER tag can simply always be specified as
MCA_BTL_NO_ORDER.
This commit was SVN r14768.
We eagerly send data up to btl_*_eager_limit with the match
Upon ACK of the MATCH we start using send/receives of size
btl_*_max_send_size up to the btl_*_rdma_pipeline_offset
After the btl_*_rdma_pipeline_offset we begin using RDMA writes of
size btl_*_rdma_pipeline_frag_size.
Now, on a per message basis we only use the above protocol if the
message is larger than btl_*_min_rdma_pipeline_size
btl_*_eager_limit - > same
btl_*_max_send_size -> same
btl_*_rdma_pipeline_offset -> btl_*_min_rdma_size
btl_*_rdma_pipeline_frag_size -> btl_*_max_rdma_size
btl_*_min_rdma_pipeline_size is new..
This patch also moves all BTL common parameters initialisation into
btl_base_mca.c file.
This commit was SVN r14681.
- Move the PML Modex stuff out of the BML -- Abstraction violation.
- Also fix the location of the add_procs with respect to the stage gates.
This commit was SVN r14422.
Fix for memory corruption in the restarted process stack. This stemed from
the brute force method we were previously using. This commit fixes this by
using a lighter weight solution focused in the r2 BML instead of above the PML.
This is a more efficient and flexible solution, and it solves the original
problem.
In the process I pulled out the ft_event function in the tcp BTL and r2 BML
into a set of *_ft.[c|h] files just to keep any updates to these code paths
as isolated as possible to make merging easier on everyone.
This commit was SVN r14371.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
The following Trac tickets were found above:
Ticket 977 --> https://svn.open-mpi.org/trac/ompi/ticket/977
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
Remove a redundant statement in the r2 BML.
This commit was SVN r14228.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
Back out r14073 - it speeds up TCP latency / bandwidth but at the same time
it kills ROMIO and one-sided performance when using only TCP. The problem
is that it only allows those two to be progressed every couple of seconds,
leading to what looks like hangs in the one-sided tests (and the ROMIO stuff,
although people seem to not notice that at this point).
This commit was SVN r14144.
The following SVN revision numbers were found above:
r14073 --> open-mpi/ompi@64fbbc20b8
r14142 --> open-mpi/ompi@241545a098
it kills ROMIO and one-sided performance when using only TCP. The problem
is that it only allows those two to be progressed every couple of seconds,
leading to what looks like hangs in the one-sided tests (and the ROMIO stuff,
although people seem to not notice that at this point).
This commit was SVN r14142.
The following SVN revision numbers were found above:
r14073 --> open-mpi/ompi@64fbbc20b8
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
- Implement the BML/r2 finialize funciton
- Cleanup the btl close routine
- Wire up a pml_base_verbose MCA parameter so you can actually watch the PML selection logic if you really want to.
- Fix a potental segfault in the selection logic.
ompi_pointer_array_get_item() may return NULL, so we have to check for it
This commit was SVN r13734.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
OB1 always use first element from array of BTLs available for RDMA. The patch
change the array creation algorithm, it puts different BTL in the first element
in round robin fashion.
This commit was SVN r13174.
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
* Make sure that the pval always writes to the correct portion of the
lval. This only matters on 32 bit big endian machines.
* On 32 bit machines when assigning to pval, the other 4 bytes of lval
weren't being written, which could lead to bogus data
We use macros so that there aren't casts all over the code and the pval
assignment can occur to the correct 4 bytes. Refs trac:587
This commit was SVN r12974.
The following Trac tickets were found above:
Ticket 587 --> https://svn.open-mpi.org/trac/ompi/ticket/587
inuse decrement for the increment that was at the start of the procs loop.
Otherwise, the inuse count can end up higher than it actually is and a btl
can end up in the progress loop when it isn't active to any peer.
Refs trac:543
This commit was SVN r12938.
The following Trac tickets were found above:
Ticket 543 --> https://svn.open-mpi.org/trac/ompi/ticket/543
udapl/openib/vapi/gm mpools a deprecated. rdma mpool has parameter that allows
to limit its size mpool_rdma_rcache_size_limit (default is 0 - unlimited).
This commit was SVN r12878.
all platforms. The only exceptions (and I will not deal with them
anytime soon) are on Windows:
- the write functions which require the length to be an int when it's
a size_t on all UNIX variants.
- all iovec manipulation functions where the iov_len is again an int
when it's a size_t on most of the UNIXes.
As these only happens on Windows, so I think we're set for now :)
This commit was SVN r12215.
