Take another shot at untangling the spaghetti
orterun: fix for command line parsing
orte-submit calls opal_init_util () before parsing out MCA command line
options (-mca, -am, etc). This prevents mpirun from setting opal MCA
variables for some frameworks as well as the MCA base. This is because
when a framework is opened all of its variables are set to read-only.
Eventually we want to lift this restriction on some MCA variables but
since -mca is affected we must parse out the MCA command line options
before opal_init_util(). This commit fixes the bug by adding a new
option to opal_cmd_line_parse (ignore unknown option) so orte-submit
can pre-parse the command line for MCA options.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Minor cleanups to avoid releasing/recreating the cmd line
* Clean up the DVM so it continues to run even when applications error out and we would ordinarily abort the daemons.
* Create a new errmgr component for the DVM to handle the differences.
* Cleanup the DVM state component.
* Add ORTE bindings directory and brief README
* Pass a local tool index around to match jobs.
* Pass the jobid on job completion.
* Fix initialization logic.
* Add framework for python wrapper.
* Fix terminate-with-non-zero-exit behavior so it properly terminates only the indicated procs, notifies orte-submit, and orte-dvm continues executing.
* Add some missing options to orte-dvm
* Fix a bug in -host processing that caused us to ignore the #slots designator. Add a new attribute to indicate "do not expand the DVM" when submitting job spawn requests.
* It actually makes no sense that we treat the termination of all children differently than terminating the children of a specific job - it only creates confusion over the difference in behavior. So terminate children the same way regardless.
Extend the cmd_line utility to easily allow layering of command line definitions
Catch up with ORTE interface change and make build more generic.
Disable "fixed dvm" logic for now.
Add another cmd_line function to merge a table of cmd line options with another one, reporting as errors any duplicate entries. Use this to allow orterun to reuse the orted_submit code
Fix the "fixed_dvm" logic by ensuring we reset num_new_daemons to zero. Also ensure that the nidmap is sent with the first job so the downstream daemons get the node info. Remove a duplicate cmd line entry in orterun.
Revise the DVM startup procedure to pass the nidmap only once, at the startup of the DVM. This reduces the overhead on each job launch and ensures that the nidmap doesn't get overwritten.
Add new commands to get_orted_comm_cmd_str().
Move ORTE command line options to orte_globals.[ch].
Catch up with extra orte_submit_init parameter.
Add example code.
Add documentation.
Bump version.
The nidmap and routing data must be updated prior to propagating the xcast or else the xcast will fail.
Fix the return code so it is something more expected when an error occurs. Ensure we get an error returned to us when we fail to launch for some reason. In this case, we will always get a launch_cb as we did indeed attempt to spawn it. The error code will be returned in the complete_cb.
Fix the return code from orte_submit_job - it was returning the tracker index instead of "success". Take advantage of ORTE's pretty-print capabilities to provide a nice error output explaining why we failed to launch. Ensure we always get a launch_cb when we fail to launch, but no complete_cb as the job never launched.
Extend the error reporting capability to job completion as well.
Add index parameter to orte_submit_job().
Add orte_job_cancel and implement ORTE_DAEMON_TERMINATE_JOB_CMD.
Factor out dvm termination.
Parse the terminate option at tool level.
Add error string for ORTE_ERR_JOB_CANCELLED.
Add some safeguards.
Cleanup and/of comments.
Enable the return.
Properly ORTE_DECLSPEC orte_submit_halt.
Add orte_submit_halt and orte_submit_cancel to interface.
Use the plm interface to terminate the job
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now.
This commit was SVN r27527.
The following SVN revision numbers were found above:
r27451 --> open-mpi/ompi@d59034e6ef
r27456 --> open-mpi/ompi@ecdbf34937
distinguish between unknown ''options'' (i.e., command line options
that are registered and have some meaning) and unknown ''tokens''
(i.e., strings that do not begin with "-"). Hence, if you did:
mpirun --fo my_mpi_program
(when perhaps you meant to type "--foo", mpirun would complain that no
such executable "--fo" existed. That is ''correct,'' but perhaps not
completely useful. It is more accurate for mpirun to report that
there is no such "--fo" option.
This change to cmd_line.c makes it so that we will ''always'' report
errors regarding tokens that begin with "-".
This commit was SVN r26953.
* fixed some bugs where "unknown" tokens were allowed on the command
line (which should really only be used for ortertun).
* if an unknown token is encountered, print a short error to stderr
and quit with a nonzero exit status
* if we don't find the right number of parameters to an option, print
a short error to stderr and quit with a nonzero exit status
* when --help is given, print the help message to stdout (not stderr)
and quit with a zero exit status
* added --showme:help option to the wrapper compilers
* updated docs in opal/util/cmd_line.h
* other small/miscellaneous CLI parsing bugs in various tools
I won't bore you with what we did before. :-) Here's some examples
of what the new behavior looks like:
{{{
% ompi_info --bogus
ompi_info: Error: unknown option "--bogus"
Type 'ompi_info --help' for usage.
% ompi_info --param bogus
ompi_info: Error: option "--param" did not have enough parameters (2)
Type 'ompi_info --help' for usage.
%
}}}
This commit was SVN r26072.
pass that on to callers of opal_cmd_line_make_opt_mca().
Thanks to Thomas Naughton III.
- Additionally, cmd-line parameters passed in table to opal_cmd_line_create()
may be wrong (e.g. OPAL_ERR_BAD_PARAM), which may be missed in the
loop.
This commit was SVN r22153.
__opal_attribute_nonnull__, __opal_attribute_warn_unused_result__,
__opal_attribute_malloc__, __opal_attribute_sentinel__ and
__opal_attribute_format__
This commit was SVN r14078.
- mca_base_param_file_prefix
(Default: NULL)
This is the fullname of the "-am" mpirun option. Used to specify a ':'
separated list of AMCA parameter set files.
- mca_base_param_file_path
(Default: $SYSCONFDIR/amca-param-sets/:$CWD)
The path to search for AMCA files with relative paths. A warning will be
printed if the AMCA file cannot be found.
* Added a new function "mca_base_param_recache_files" the re-reads the file
configurations. This is used internally to help bootstrap the MCA system.
* Added a new orterun/mpirun command line option '-am' that aliases for the
mca_base_param_file_prefix MCA parameter
* Exposed the opal_path_access function as it is generally useful in other
places in the code.
* New function "opal_cmd_line_make_opt_mca" which will allow you to append a
new command line option with MCA parameter identifiers to set at the same
time. Previously this could only be done at command line declaration time.
* Added a new directory under the $pkgdatadir named "amca-param-sets" where all
the 'shipped with' Open MPI AMCA parameter sets are placed. This is the first
place to search for AMCA sets with relative paths.
* An example.conf AMCA parameter set file is located in
contrib/amca-param-sets/.
* Jeff Squyres contributed an OpenIB AMCA set for benchmarking.
Note: You will need to autogen with this commit as it adds a configure param.
Sorry :(
This commit was SVN r13867.
the initialization in the start of the function is going to remain for
the life of the function is erroneous. Need to initialize before
using in the snprintf() call.
Refs trac:340
This commit was SVN r11781.
The following Trac tickets were found above:
Ticket 340 --> https://svn.open-mpi.org/trac/ompi/ticket/340
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
Windows version for the libevent. The one they provide is more than
innapropriate for what we need (without talking about the fact that
the code is just plain wrong).
This commit was SVN r11329.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
ompi/).
- There's still a handful of places that have orte/ #include files;
still need to clean those up
- A lot of places still use ompi/include/constants.h -- those need to
be converted over to use OPAL_ return codes and then switch to the
opal constants.h. This commit is the first few steps towards
that...
This commit was SVN r6843.
* rename ompi_basename to opal_basename
* rename ompi bitop functions to opal
* rename ompi_cmd_line to opal_cmd_line
* rename ompi_sizet2int to opal_sizet2int
* rename orte_daemon_init to opal_daemon_init
* rename ompi_few to opal_few
This commit was SVN r6330.
