1
1
Граф коммитов

22 Коммитов

Автор SHA1 Сообщение Дата
Ralph Castain
9613b3176c Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.

I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.

This commit was SVN r18619.
2008-06-09 14:53:58 +00:00
Ralph Castain
7bee71aa59 Fix a potential, albeit perhaps esoteric, race condition that can occur for fast HNP's, slow orteds, and fast apps. Under those conditions, it is possible for the orted to be caught in its original send of contact info back to the HNP, and thus for the progress stack never to recover back to a high level. In those circumstances, the orted can "hang" when trying to exit.
Add a new function to opal_progress that tells us our recursion depth to support that solution.

Yes, I know this sounds picky, but good ol' Jeff managed to make it happen by driving his cluster near to death...

Also ensure that we declare "failed" for the daemon job when daemons fail instead of the application job. This is important so that orte knows that it cannot use xcast to tell daemons to "exit", nor should it expect all daemons to respond. Otherwise, it is possible to hang.

After lots of testing, decide to default (again) to slurm detecting failed orteds. This proved necessary to avoid rather annoying hangs that were difficult to recover from. There are conditions where slurm will fail to launch all daemons (slurm folks are working on it), and yet again, good ol' Jeff managed to find both of them.

Thanks you Jeff! :-/

This commit was SVN r18611.
2008-06-06 19:36:27 +00:00
George Bosilca
25ae9c12e6 Silence few warnings.
This commit was SVN r18568.
2008-06-03 19:58:40 +00:00
Ralph Castain
b456fb2d42 Upgrade the node/orted failure detection code to cover all environments. Use the native environment's capabilities where possible - e.g., SLURM detects orted failure and can report it. Elsewhere, use a heartbeat system to detect orted failure - e.g., for TM and rsh. Heart rate is set via mca param. The HNP checks for callback every 2*heartrate, declares orted failure if not seen in last 2*heartrate time.
Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher.

Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported.

More info to come on devel list.

This commit was SVN r18555.
2008-06-02 21:46:34 +00:00
Pak Lui
695c158192 silence some intel and pgcc compiler warnings.
This commit was SVN r18501.
2008-05-26 20:35:13 +00:00
Pak Lui
7b3d7dcac4 This commit closes trac:1300.
This commit was SVN r18473.

The following Trac tickets were found above:
  Ticket 1300 --> https://svn.open-mpi.org/trac/ompi/ticket/1300
2008-05-21 22:35:04 +00:00
Jeff Squyres
e7ecd56bd2 This commit represents a bunch of work on a Mercurial side branch. As
such, the commit message back to the master SVN repository is fairly
long.

= ORTE Job-Level Output Messages =

Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):

 * orte_output(): (and corresponding friends ORTE_OUTPUT,
   orte_output_verbose, etc.)  This function sends the output directly
   to the HNP for processing as part of a job-specific output
   channel.  It supports all the same outputs as opal_output()
   (syslog, file, stdout, stderr), but for stdout/stderr, the output
   is sent to the HNP for processing and output.  More on this below.
 * orte_show_help(): This function is a drop-in-replacement for
   opal_show_help(), with two differences in functionality:
   1. the rendered text help message output is sent to the HNP for
      display (rather than outputting directly into the process' stderr
      stream)
   1. the HNP detects duplicate help messages and does not display them
      (so that you don't see the same error message N times, once from
      each of your N MPI processes); instead, it counts "new" instances
      of the help message and displays a message every ~5 seconds when
      there are new ones ("I got X new copies of the help message...")

opal_show_help and opal_output still exist, but they only output in
the current process.  The intent for the new orte_* functions is that
they can apply job-level intelligence to the output.  As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.

=== New code ===

For ORTE and OMPI programmers, here's what you need to do differently
in new code:

 * Do not include opal/util/show_help.h or opal/util/output.h.
   Instead, include orte/util/output.h (this one header file has
   declarations for both the orte_output() series of functions and
   orte_show_help()).
 * Effectively s/opal_output/orte_output/gi throughout your code.
   Note that orte_output_open() takes a slightly different argument
   list (as a way to pass data to the filtering stream -- see below),
   so you if explicitly call opal_output_open(), you'll need to
   slightly adapt to the new signature of orte_output_open().
 * Literally s/opal_show_help/orte_show_help/.  The function signature
   is identical.

=== Notes ===

 * orte_output'ing to stream 0 will do similar to what
   opal_output'ing did, so leaving a hard-coded "0" as the first
   argument is safe.
 * For systems that do not use ORTE's RML or the HNP, the effect of
   orte_output_* and orte_show_help will be identical to their opal
   counterparts (the additional information passed to
   orte_output_open() will be lost!).  Indeed, the orte_* functions
   simply become trivial wrappers to their opal_* counterparts.  Note
   that we have not tested this; the code is simple but it is quite
   possible that we mucked something up.

= Filter Framework =

Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr.  The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations.  The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc.  This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).

Filtering is not active by default.  Filter components must be
specifically requested, such as:

{{{
$ mpirun --mca filter xml ...
}}}

There can only be one filter component active.

= New MCA Parameters =

The new functionality described above introduces two new MCA
parameters:

 * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
   help messages will be aggregated, as described above.  If set to 0,
   all help messages will be displayed, even if they are duplicates
   (i.e., the original behavior).
 * '''orte_base_show_output_recursions''': An MCA parameter to help
   debug one of the known issues, described below.  It is likely that
   this MCA parameter will disappear before v1.3 final.

= Known Issues =

 * The XML filter component is not complete.  The current output from
   this component is preliminary and not real XML.  A bit more work
   needs to be done to configure.m4 search for an appropriate XML
   library/link it in/use it at run time.
 * There are possible recursion loops in the orte_output() and
   orte_show_help() functions -- e.g., if RML send calls orte_output()
   or orte_show_help().  We have some ideas how to fix these, but
   figured that it was ok to commit before feature freeze with known
   issues.  The code currently contains sub-optimal workarounds so
   that this will not be a problem, but it would be good to actually
   solve the problem rather than have hackish workarounds before v1.3 final.

This commit was SVN r18434.
2008-05-13 20:00:55 +00:00
Josh Hursey
9971bc9d95 Merge in the mca_base_select changes per RFC:
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php

{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}

Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.

Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.

This commit was SVN r18381.
2008-05-06 18:08:45 +00:00
Ralph Castain
b2c73f6e11 Fix tree-spawn to work within the new modex system
This commit was SVN r18349.
2008-05-01 19:19:34 +00:00
Ralph Castain
1766442591 Fix a double-free when tree-spawning
Fix the round-robin mapper so it doesn't move to the next node just because it completed mapping an app_context

This commit was SVN r18344.
2008-05-01 14:49:56 +00:00
Ralph Castain
3e55fe6f6d Fold in the revised modex scheme. Move the ompi_proc_t modex portions to the RTE level since the daemons already have that info. Provide each process with the equivalent of a "nidmap" - both a map of what nodes are in the job, and a map of which node each process is on. This enables the use of static ports, though that hasn't been turned "on" in this commit.
Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs.

Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node.

This commit was SVN r18338.
2008-04-30 19:49:53 +00:00
Ralph Castain
4c2c6c9bd8 Ensure the pack/unpacks match for tree-spawn
This commit was SVN r18282.
2008-04-24 18:53:08 +00:00
Ralph Castain
09b6758f8c Pass the prefix dir to the remote orted when doing tree-based spawns
This commit was SVN r18280.
2008-04-24 18:38:24 +00:00
Ralph Castain
a4ea756a76 Ensure the node loop cntr gets incremented if the daemon already exists
This commit was SVN r18150.
2008-04-15 14:20:03 +00:00
Ralph Castain
7c7304466c Add a binomial tree-based launch to ssh, turned "on" only when the plm_rsh_tree_spawned mca param is set to a non-zero value. This probably isn't a very optimized capability, but it does execute a tree-based launch that may scale better than linear at high node counts.
Add the daemon map capability to the ODLS to create and save a map of daemon vpid vs nodename from the launch message.

Cleanup a few places in the base plm launch support where we didn't adequately protect rml recv's from potentially executing sends.

This commit was SVN r18143.
2008-04-14 18:26:08 +00:00
Ralph Castain
57e3e86cda Use the proper exit code for mpirun to indicate an error when something goes wrong during launch (in scenarios where the procs don't report the problem directly themselves)
This commit was SVN r18121.
2008-04-10 09:15:08 +00:00
Ralph Castain
f3936ff9bc Record the daemon's state so that we don't attempt to send "die" messages to a daemon that is known to have failed to start.
This commit was SVN r18044.
2008-03-31 18:15:24 +00:00
George Bosilca
2ed6ed37bd Don't forget to cleanup once we're done.
This commit was SVN r17965.
2008-03-25 22:42:24 +00:00
Ralph Castain
dc7f45dafd Remove the obsolete and largely unused orte_system_info structure. The only fields that were used in that struct were nodeid and nodename - these have been transferred to the orte_process_info structure.
Only one place used the user name field - session_dir, when formulating the name of the top-level directory. Accordingly, the code for getting the user's id has been moved to the session_dir code.

This commit was SVN r17926.
2008-03-23 23:10:15 +00:00
Ralph Castain
edb8e32a7a Add default hostfile parameter plus --default-hostfile command line option.
Fix error message when job setup failed

This commit was SVN r17724.
2008-03-05 04:54:57 +00:00
Ralph Castain
5e6928d710 Cleanup recursions in ORTE caused by processing recv'd messages that can cause the system to take action resulting in receipt of another message.
Basically, the method employed here is to have a recv create a zero-time timer event that causes the event library to execute a function that processes the message once the recv returns. Thus, any action taken as a result of processing the message occur outside of a recv.

Created two new macros to assist:

ORTE_MESSAGE_EVENT: creates the zero-time event, passing info in a new orte_message_event_t object

ORTE_PROGRESSED_WAIT: while waiting for specified conditions, just calls progress so messages can be recv'd.

Also fixed the failed_launch function as we no longer block in the orted callback function. Updated the error messages to reflect revision. No change in API to this function, but PLM "owners" may want to check their internal error messages to avoid duplication and excessive output.

This has been tested on Mac, TM, and SLURM.

This commit was SVN r17647.
2008-02-28 19:58:32 +00:00
Ralph Castain
d70e2e8c2b Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately.
Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer

This commit was SVN r17632.
2008-02-28 01:57:57 +00:00