Handle the need for different regex generator/parsers by moving the
orte/util/nidmap and orte/util/regex code into a new "regx" framework.
Use the original code to complete a "fwd" component, and create a
scaffold for IBM's "reverse" component.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Now that the daemon calls remote_spawn itself, there is no longer
a need for the "tree_spawn" command nor the associated command
processing code since the HNP is no longer sending a tree-spawn
message to the orted.
Thanks Ralph for the guidance !
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
When the node regex is too long to be sent on the command line,
retrieve it first from the parent, and then spawn the remote orted
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Somehow, the code for passing a daemon's parent was accidentally removed, thus breaking the tree-spawn callback sequence and causing all daemons to phone directly home. Note that this is noticeably slower than no-tree-spawn for small clusters where directly ssh launch of the child daemons from the HNP doesn't overload the available file descriptors.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
passed to make it all flow thru the opal/pmix "put/get" operations. Update the PMIx code to latest master to pickup some required behaviors.
Remove the no-longer-required get_contact_info and set_contact_info from the RML layer.
Add an MCA param to allow the ofi/rml component to route messages if desired. This is mainly for experimentation at this point as we aren't sure if routing wi
ll be beneficial at large scales. Leave it "off" by default.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Remove the opal_ignore from the RML/OFI component, but disable that component unless the user specifically requests it via the "rml_ofi_desired=1" MCA param. This will let us test compile in various environments without interfering with operations while we continue to debug
Fix an error when computing the number of infos during server init
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
onto the backend daemons. By default, let mpirun only pack the app_context
info and send that to the backend daemons where the mapping will
be done. This significantly reduces the computational time on mpirun as it isn't
running up/down the topology tree computing thousands of binding
locations, and it reduces the launch message to a very small number of
bytes.
When running -novm, fall back to the old way of doing things
where mpirun computes the entire map and binding, and then sends
the full info to the backend daemon.
Add a new cmd line option/mca param --fwd-mpirun-port that allows
mpirun to dynamically select a port, but then passes that back to
all the other daemons so they will use that port as a static port
for their own wireup. In this mode, we no longer "phone home" directly
to mpirun, but instead use the static port to wireup at daemon
start. We then use the routing tree to rollup the initial
launch report, and limit the number of open sockets on mpirun's node.
Update ras simulator to track the new nidmap code
Cleanup some bugs in the nidmap regex code, and enhance the error message for not enough slots to include the host on which the problem is found.
Update gadget platform file
Initialize the range count when starting a new range
Fix the no-np case in managed allocation
Ensure DVM node usage gets cleaned up after each job
Update scaling.pl script to use --fwd-mpirun-port. Pre-connect the daemon to its parent during launch while we are otherwise waiting for the daemon's children to send their "phone home" rollup messages
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Per a prior commit, the presence of "hwloc.h" can cause ambiguity when
using --with-hwloc=external (i.e., whether to include
opal/mca/hwloc/hwloc.h or whether to include the system-installed
hwloc.h).
This commit:
1. Renames opal/mca/hwloc/hwloc.h to hwloc-internal.h.
2. Adds opal/mca/hwloc/autogen.options to tell autogen.pl to expect to
find hwloc-internal.h (instead of hwloc.h) in opal/mca/hwloc.
3. s@opal/mca/hwloc/hwloc.h@opal/mca/hwloc/hwloc-internal.h@g in the
rest of the code base.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Given that we only set OOB contact info from inside of events, or before we begin threaded operations (e.g., in the ess), allow set_contact_info to directly update the oob/base framework globals.
Correct the nidmap regex decompression routine.
Ensure that rank=1 daemon always sends back its topology as this is the most common use-case.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Cleanup a typo, and remove no longer needed MCA params for hetero nodes and hetero apps. Hetero nodes will always be automatically detected. We don't support a mix of 32 and 64 bit apps
Modify the orte_node_t to use orte_topology_t instead of hwloc_topology_t, updating all the places that use it. Ensure that we properly update topology when we see a different one on a compute node.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Revamp the event notification integration to rely on the PMIx event chaining and remove the duplicate chaining in OPAL. This ensures we get system-level events that target non-default handlers.
Restore the hostname entries for MPI-level error messages, but provide an MCA param (orte_hostname_cutoff) to remove them for large clusters where the memory footprint is problematic. Set the default at 1000 nodes in the job (not the allocation).
Begin first cut at memory profiler
Some minor cleanups of memprobe
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Still not completely done as we need a better way of tracking the routed module being used down in the OOB - e.g., when a peer drops connection, we want to remove that route from all conduits that (a) use the OOB and (b) are routed, but we don't want to remove it from an OFI conduit.
Take another shot at untangling the spaghetti
orterun: fix for command line parsing
orte-submit calls opal_init_util () before parsing out MCA command line
options (-mca, -am, etc). This prevents mpirun from setting opal MCA
variables for some frameworks as well as the MCA base. This is because
when a framework is opened all of its variables are set to read-only.
Eventually we want to lift this restriction on some MCA variables but
since -mca is affected we must parse out the MCA command line options
before opal_init_util(). This commit fixes the bug by adding a new
option to opal_cmd_line_parse (ignore unknown option) so orte-submit
can pre-parse the command line for MCA options.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Minor cleanups to avoid releasing/recreating the cmd line
* provide a more reliable way of determining that a process is a singleton by leveraging the schizo framework. Add new components for slurm, alps, and orte to detect when we are in a managed environment, and if we have been launched by mpirun or a native launcher. Set the correct envars to control ess and pmix selection in each case.
* change the relative priority of the pmix120 and pmix112 components to make pmix120 the default
* fix singleton comm-spawn by correctly setting the num_apps field of the orte_job_t created by the daemon - this fixes a segfault in register_nspace on newly created daemons
* ensure orterun doesn't propagate any ess or pmix directives in its environment
* Cleanup a few valgrind issues and memory leaks
* Fix a race condition that prevented the client from completing notification registrations (missing thread shift)
* Ensure the shizo/alps component detects launch by mpirun
Bring Slurm PMI-1 component online
Bring the s2 component online
Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways.
Bring the OMPI pubsub/pmi component online
Get comm_spawn working again
Ensure we always provide a cpuset, even if it is NULL
pmix/cray: adjust cray pmix component for pmix
Make changes so cray pmix can work within the integrated
ompi/pmix framework.
Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet
Cleanup comm_spawn - procs now starting, error in connect_accept
Complete integration
* don't pass --tree-spawn to the orted cmd line. If someone doesn't want tree-spawn, it shows up as an MCA param anyway
* ensure state/orted component disqualifies itself from CM operations
* clarify the DVM proc_type definitions
* ensure we stop littering the tmp dir with session directories
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Don't filter the topology by cpuset if you are mpirun until you know that no other compute nodes are involved. This deals with the corner case where mpirun is executing on a node of different topology from the compute nodes.
Simplify - don't mandate that all cpus in the given cpuset be present on every node. We can then run everything thru the filter as before, which ensures that any procs run on mpirun are also contained within the specified cpuset.
Correctly count the number of available PUs under each object when given a cpuset
Fix the default binding settings, and correctly count PUs when no cpuset is given
Ensure the binding policy gets set in all cases
Retain the hetero-nodes flag for those cases where the user *knows* that there are differences and our automated system isn't good enough to see it.
Will obviously require further refinement as we find out which variances it can detect, and which it cannot.
