* Make sure that the pval always writes to the correct portion of the
lval. This only matters on 32 bit big endian machines.
* On 32 bit machines when assigning to pval, the other 4 bytes of lval
weren't being written, which could lead to bogus data
We use macros so that there aren't casts all over the code and the pval
assignment can occur to the correct 4 bytes. Refs trac:587
This commit was SVN r12974.
The following Trac tickets were found above:
Ticket 587 --> https://svn.open-mpi.org/trac/ompi/ticket/587
udapl/openib/vapi/gm mpools a deprecated. rdma mpool has parameter that allows
to limit its size mpool_rdma_rcache_size_limit (default is 0 - unlimited).
This commit was SVN r12878.
Accordingly, there are new APIs to the name service to support the ability to get a job's parent, root, immediate children, and all its descendants. In addition, the terminate_job, terminate_orted, and signal_job APIs for the PLS have been modified to accept attributes that define the extent of their actions. For example, doing a "terminate_job" with an attribute of ORTE_NS_INCLUDE_DESCENDANTS will terminate the given jobid AND all jobs that descended from it.
I have tested this capability on a MacBook under rsh, Odin under SLURM, and LANL's Flash (bproc). It worked successfully on non-MPI jobs (both simple and including a spawn), and MPI jobs (again, both simple and with a spawn).
This commit was SVN r12597.
allocation logic is completely done outside the data-type engine (in the PML) there is
no need for any special case inside the data-type engine. There is less arguments for
the ompi_convertor_pack and ompi_convertor_unpack as well (the last field free_after is
not required anymore as there is no memory allocated in the engine itself). This change
affect all components using datatypes. I test most of them, but it might happens that I
miss some ... If it's the case please let me know (don't shoot the pianist!!).
This commit was SVN r12331.
In order to provide backwards compatability the framework versions are bumped
and the handler registeration function is at the end of the btl struct.
Testing done on sm, openib, and gm..
This commit was SVN r11256.
the upperlayer assynchronously although there are some issues with this.. such
as there are multiple consumers of the btl's.. who get's the
This commit was SVN r11232.
I've introduced a race condition - seeing occasional LOCAL_LENGTH errors on the receive side. I think I'm mixing up eager/max somehow - will look at it more on monday.
This commit was SVN r10690.
1. ompi/mca/btl/udapl/btl_udapl_proc.c should be including
btl_udapl_endpoint.h for mca_btl_udapl_proc_insert function.
2. btl_udapl_endpoint.c it looks like you are using
&endpoint->endpoint_lock when you should use &ep->endpoint_lock in a
OPAL_THREAD_LOCK call.
3. btl_udapl_frag.h has a couple opal_list_item_t's that should be
ompi_free_list_item_t in the _FRAG_ALLOC_{EAGER,MAX} macros.
This commit was SVN r10442.
- Added some basic flow control to limit number of posted sends.
- Merged endpoint send/recv lock into single endpoint lock.
- Set the LMR triplet length in the send path, not at allocation time.
This has to be done because upper layers might send less than the
amount allocated.
- Alter the tie-breaker if statement protecting the second call
to dat_ep_connect(). The logic was reversed compared to the tie-
breaker for the first dat_ep_connect(), making it possible for
3 or more processes to form a deadlock loop.
- Some asserts were added for debugging purposes.. leaving them
in place for now.
This commit was SVN r10317.
Trying to remember what I did here.. eager/max messages should work now, no RDMA yet. A number of other fixes and cleanups.
I do know of two problems:
Bad stuff happens when flooded with send frags too quickly - the BTL doesn't handle flow control.
Certain IBM tests turn up a length assertion in the datatype engine - needs more investigation.
This commit was SVN r10070.
- Some initial work on prepare_src
- Move some fragment initialization around
- Fix a union casting issue on picky compilers, identified by Don Kerr
- Other small cleanups/bugfixes
This commit was SVN r9662.
we send our local addr_t OOB. Remote side then matches endpoints and calls
dat_ep_connect(). Everything should be the same as before from here, except
that client/server roles are reversed.
- Properly set our buffer size when posting receives. When the frag used to
transfer address information is recycled by the free list, the wrong buffer
size was being used, which caused buffer overflow errors.
- Finally put the uDAPL error handling stuff in the mpool component.
- Remove a few more OPAL_OUTPUTs.
This commit was SVN r9569.
Not much got tested that wasn't already - I've uncovered a connection
establishment deadlock and wanted to get these changes committed before I
attack it.
The big changes:
- Moved much of the connection code from btl_udapl_component.c to
btl_udapl_endpoint.c.
- Cleaned up initialization of various fragment members.
- MCA_BTL_UDAPL_ERROR macro, which is compiled in/out appropriately.
This commit was SVN r9496.
- Grab the mpool_registration in _frag_common_constructor()
- Save the LMR context in the segment key
- No need for cookie variables - can just cast the frag
- No need to memcpy() data when recv'ing
- Add an LMR triplet to the fragment structure and initialize it
in btl_udapl_alloc().
- Whitespace/typo fixes, remove some opal_output() calls
Looks like I can use triplets describing sub-regions of registered LMR's. So I
do this - prior to this patch I was sending the entire free list memory over,
which isn't correct :)
Back to an earlier problem - when sending address information right after
connection establishment, the receiving end receives a DTO completion event and
appears to have good data. But the sending end never receives a DTO completion
event indicating the send completed, and never completes the client side of the
connection.
This commit was SVN r9386.
In short, I'm very close to having connection establishment and eager send/recv working.
Part of the connection process involves sending address information from the
client to server. For some reason, I am never receiving an event indicating
completetion of the send on the client side. Otherwise, connection
establishment is working and eager send/recv should be trivial from here.
Some more detailed changes:
- Send partially implemented, just handles starting up new connections.
- Several support functions implemented for establishing connection. Client
side code went in btl_udapl_endpoint.c, server side in btl_udapl_component.c
- Frags list and send/recv locks added to the endpoint structure.
- BTL sets up a public service point, which listens for new connections.
Steps over ports that are already bound, iterating through a range of ports.
- Remove any traces of recv frags, don't think I need them after all.
- Pieces of component_progress() implemented for connection establishment.
- Frags have two new types for connection establishment - CONN_SEND and
CONN_RECV.
- Many other minor cleanups not affecting functionality
This commit was SVN r9345.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
- Start filling in the progress function, focusing on connection establishment.
- Initialize udapl mpool and free lists
- Create/destroy a protection zone with each IA
- Misc organization as I learn how things work
This commit was SVN r8969.
- Remove printing of CFLAGS in configure.m4
- Set MCA_BTL_FLAGS_SEND flag
- Improved error handling during module initialization
- Extract the address of each interface with dat_ia_query
- Start playing around with fragment stuff - probably wrong
- Misc code cleanup (removal of GM-specific code)
This commit was SVN r8801.
- Move mca_btl_udapl_error/mca_btl_module_init to mca_btl_udapl.c and rename it
- White space cleanups
- Free the uDAPL evd and ia handles in mca_btl_udapl_finalize
This commit was SVN r8705.
- Borrow configure.m4 from the mvapi btl. One of the uDAPL headers emits a
warning when -pedantic is enabled, so strip it out.
- Change function check in ompi_check_dapl.m4 from dat_ia_open to
dat_registry_list_providers.. dat_ia_open wasn't working right
- Make the references to prepare_dst, put, and get NULL for now
- Add opal_output() calls in all the udapl interface functions for debugging
- Add evd_qlen component parameter to control event dispatcher queue length
- First stab at component_init and module_init
- Misc cleanups - whitespace, dead code removal
- Update copyrights to 2006
This commit was SVN r8701.
- Copied the template BTL and renamed everything
- Compiles and shows up correctly in ompi_info, not tested past that
- Should be ignored for everyone but me
This commit was SVN r8544.
