In 457f058 I broke the TCP BTL with --enable-ipv6. This patch
fixes the compile error, so IPv6 works again.
Fixed#5996
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Today, a btl tcp module is associated with exactly one IP
address (IPv4 or IPv6). There's no need to reserve space
for both an IPv4 and IPv6 address in the module structure,
since the module will only be associated with one or the
other.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
This reverts commit 6acebc40a194c92ab38a28553c2c8b04eb391820.
This patch is causing numerous "Socket closed" messages which are
causing most of the failures on Cisco's MTT run. See
https://github.com/open-mpi/ompi/issues/5849 for more information.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
The Open MPI code base assumed that asprintf always behaved like
the FreeBSD variant, where ptr is set to NULL on error. However,
the C standard (and Linux) only guarantee that the return code will
be -1 on error and leave ptr undefined. Rather than fix all the
usage in the code, we use opal_asprintf() wrapper instead, which
guarantees the BSD-like behavior of ptr always being set to NULL.
In addition to being correct, this will fix many, many warnings
in the Open MPI code base.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Get Brian's patch from #5825 and his log message:
Fix a failure in binding the initiating side of a connection
on MacOS. MacOS doesn't like passing the size of the storage
structure (sockaddr_storage) instead of the expected size of
the structure (sockaddr_in or sockaddr_in6), which was causing
bind() failures. This patch simply changes the structure size
to the expected size.
Add a more clear error message in debug mode.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
When an error is returned by the socket operations, trigger the
appropriate error path in the PML to give an opportunity for
rerouting/error handling.
Signed-off-by: Aurelien Bouteiller <bouteill@icl.utk.edu>
Fix case where the btl_tcp_links MCA parameter is used to create multiple TCP connections between peers.
Three issues were resulting in hangs during large message transfer:
* The 2nd..btl_tcp_link connections were dropped during establishment because the per-process
address check was binary, rather than a count
* The accept handler would not skip a btl module that was already in use, resulting in all
connections for a given address being vectored to a single btl
* Multiple addresses in the same subnet caused connections to be
stalled, as the receiver would always use the same (first) address
found. Binding the outgoing connection solves this issue
* Lastly fix race condition created by connections being started at the exact same time
by accpeting connections not in the closed state, allowing endpoint_accept to resolve
dispute
Signed-off-by: Jordan Cherry <cherryj@amazon.com>
Their is racing condition in TCP connection establishment
during simultaneous handshake. This PR handles the fix for
it.
Signed-off-by: Mohan Gandhi <mohgan@amazon.com>
This commit has two changes
1. Adding magic string during handshake can cause
issue when used with older version of MPI. Hence set
RCVTIMEO paramter to 2 second
2. Using single call during handshake instead of
two calls
Signed-off-by: Mohan Gandhi <mohgan@amazon.com>
As part of improvement towards tcp debugging
we are moving few BTL_ERROR to show_help and also
update the function behaviour of
mca_btl_tcp_endpoint_complete_connect to return
SUCCESS and ERROR cases.
Signed-off-by: Mohan Gandhi <mohgan@amazon.com>
As part of improvement towards handling failure case
in btl tcp we are using magic string to verify mpi
connection. In case if there is mismatch or missing
magic string we can identify that we are trying to
connect with someother process.
Signed-off-by: Mohan Gandhi <mohgan@amazon.com>
Moving non-blocking send/receive function to btl_tcp
will help reusing these function where ever needed.
In this case we plan to reuse receive function to
retrive magic string to validate established connection
is from mpi process.
Signed-off-by: Mohan Gandhi <mohgan@amazon.com>
Based on an idea from Brian move the libevent trigger update to a later
stage instead of the generic add/del procs. So, we are doing the
increment/decrement when we register the recv handler for an endpoint,
so basically when we create and connect a socket to a peer. The benefit
is that as long as TCP is not used, there should be no impact on the
performance of other BTLs. The drawback is that the first TCP connection
will be slightly slower, but then once we have a peer connected over
TCP things go back to normal.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
In some rare cases when a process receives the connect ack while
locally updating the peer endpoint structure, we could drop the
incomming connect ack due to the fact that the send handler is
protected with a try lock (on the endpoint) and our initial send
event was not persistent. Making the send event persistent solves
all issues.
Added mca parameter to turn progress thread on/off
Add a flag to check if we have btl progress thread.
Added macro for ob1 matching lock.
Update the AUTHORS file.
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
while cleaning up after receiving a zero byte on the connect socket
(localyy started connection), while another was trying to accept a
new connection from the same peer. Create a zero-timed event and
delocalize the accept into a timer_event.
Add support for registering an error callback, that can be used when a
connection is discovered as failed during the initialization process.
was quite subtle, and only happened on the process with the smallest
guid (as this process will tear down the connection created locally and
replace it with the result of accept). If multiple threads are active in
the system, the deadlock occurs during the recv event deletion as one
thread will hold the recv event lock of the endpoint and try to access
the TCP event base lock, while the other thread will hold the TCP event
base lock while trying to access the recv event lock (in case data is
available on the socket).
The proposed solution let the event callback fail to process the data,
preventing the deadlock and allowing the other thread to always complete
it's job. As the event is not execute the same triggered will trigger
again at the next opportunity, so this solution introduce a minimal
delay in the connection establishement.
Properly setup the opal_process_info structure early in the initialization procedure. Define the local hostname right at the beginning of opal_init so all parts of opal can use it. Overlay that during orte_init as the user may choose to remove fqdn and strip prefixes during that time. Setup the job_session_dir and other such info immediately when it becomes available during orte_init.
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
