#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
- add a cmake module for searching libltdl libraries and headers
- a configure option to enable DSO build, default OFF.
- update a few source files for including correct header
and loading correct mca libraries path/suffix.
This commit was SVN r21804.
support for _Complex is disabled until we figure out the correct
black magic. So instead of using this nice C99 feature, we use the
a strcture with a double type, the same approach that worked pretty
well for the last couple of years.
Switching from one mode to the other is done using the
OPAL_USE_[FLOAT|DOUBLE|LONG_DOUBLE]__COMPLEX macros defined in
opal_datatype_internal.h at line 442.
This commit was SVN r21800.
Adds several new mpirun options:
* -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding.
* -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned.
* -bind-to-core - currently the default behavior (maintained from prior default)
* -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile
Similar features/options are provided at the board level for multi-board nodes.
Documentation to follow...
This commit was SVN r21791.
Refs trac:1987
The patch for v1.3 attached to Ticket #1987 already includes this change.
I did not have a chance to commit this last night, so sorry for the delay.
This commit was SVN r21777.
The following Trac tickets were found above:
Ticket 1987 --> https://svn.open-mpi.org/trac/ompi/ticket/1987
Complex should either be a struct of float on the ompi-layer
or as C99 float _complex in opal.
unconstify to not break windows / the mpi* wrappers.
This commit was SVN r21770.
The following SVN revision numbers were found above:
r21763 --> open-mpi/ompi@668f001351
* Check for {{{dlfcn.h}}} in the self component's configure.m4 (also clean up the .m4 a bit.
* Adjust the priority of the BLCR component so that the self component has a higher priority (if the application went to the trouble of writing the routines, why not use them.) The 'self' component checks for the appropriate functions during query, so it know if it -can- be used during component selection.
* Adjust some copyrights that I missed before
* Fix a warning when casing the result of dlsym() into a function pointer. There is a bit of pointer magic to make this happen (thanks to the following website, and RedHat EL 4 man pages for illustrating it:
http://www.opengroup.org/onlinepubs/009695399/functions/dlsym.html
Passing to Jeff for a final review of the patch before moving to v1.3.
This commit was SVN r21768.
The following SVN revision numbers were found above:
r21766 --> open-mpi/ompi@91e52d062b
Due to the visibility patch to libltdl in r21731, this module can no longer access or use the libltdl interfaces directly. Instead just use the dlopen/dlsym/dlclose functions directly. This is a portability implication here, but for the moment it does not seem to bite us.
Also in this patch, cleanup some of the 'self' specific code paths.
* opal-restart need not special case the 'self' component since it can now interact with it as if it were a normal component.
* Cleanup the initialization of the cmd line arguments in opal-restart.
* Make sure to mark opal-restart as a 'tool', but do so by setting the global variable directly instead of setting the environment variable, which could be inherited by the application.
* Most of the functions in the 'self' component should not be used by a command line tool (exception being 'restart'), so make sure that if we accidently call them then errors are returned.
* Increase the priority of the 'none' component to be above that of 'self' when being selected in a command line tool. This allows for both mpirun and opal-restart to work correctly with the 'self' module.
This commit was SVN r21766.
The following SVN revision numbers were found above:
r21731 --> open-mpi/ompi@0278b86456
C++ compiler in configure. If we have a C++ compiler, then the MPI
C++ bindings are built by default. If we don't have a C++ compiler,
then the MPI C++ bindings are not built by default.
--enable-mpi-cxx will now force an error if there is no C++ compiler
available. --disable-mpi-cxx (or the lack of a C++ compiler) will now
disable many of the C++ compiler checks in configure.
Note that there are a few items to clean up regarding the difference
between C's _Bool type and C++'s bool type. Right now, we assume that
they are the same. But they aren't, and they shouldn't be treated as
such. This cleanup will be forced in MPI-2.2 with the introduction of
the MPI_C_BOOL MPI datatype.
This commit was SVN r21755.
note in VERSION file.
NOTE: the versions will ''always'' be 0:0:0 on the SVN trunk and
developer branches. They will only have meaningful values (starting
with 0:0:0 in 1.3.4) on release branches. Only RM's will modify these
values immediately preceeding a release.
This commit was SVN r21729.
* Installation directories will be inferred from the actual location
of the shared library that contains the component.
* OPAL_PREFIX and other environment variables allow users to override
the inferred directories. They should no longer be necessary in
most cases, though.
* Any directories that cannot be inferred will fall back to whatever
is provided by the config installdirs component.
This commit was SVN r21723.
- Add a CMake macro for checking OPAL_MAX_XXX values, re-written from OPAL_WITH_OPTION_MIN_MAX_VALUE m4 function.
- Definition prefix changes and additional datatype alignments checking.
- Finish the datatype splitting on Windows too. :-)
This commit was SVN r21649.
The following SVN revision numbers were found above:
r21641 --> open-mpi/ompi@6c5532072a
r21642 --> open-mpi/ompi@c971c09eb6
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
