support in OMPI. Currently only enables/disables the architecture
sharing modex in ob1 pml.
* Add sds framework to ompi_info
* Figure out table ids to use for Portals BTL at configure time, since
we should use 30 & 31 on Red Storm, but the reference implementation
only supports 0-8.
* Some bug fixes in Portals UTCP sds
This commit was SVN r6650.
load a set of arguments to build OMPI. So you can do something like:
./configure --with-platform=redstorm
and automagically have all 10,000 arguments to configure required
for Red Storm magically set
* change all instances of sinclude to m4_include so that autogen
will properly fail if an .m4 file isn't included properly
This commit was SVN r6648.
the MX BTL and MX PTL, so I decide to have short common options on the "configure --help".
--with-mx = for the base MX directory and
--with-mx-libdir = for the library path.
This commit was SVN r6631.
- only call sched_yield if it exists
- don't fail out if modex doens't work in ob1
- bunch of fixes for Portals BTL
- add cnos rml component
- add NULL gpr component (should only be used if replica AND proxy
fail to load)
This commit was SVN r6629.
* Add ability to completely disable libltdl (the dlopen code to load
dynamic shared objects) to configure: --disable-dlopen
* Added MCA param (component_disable_dlopen) to disable DSO loading
at runtime
* Made the event library behave in some not-completely-erroneous way
on platforms where it has absolutely no eventops support (ie, no
select, poll, or epoll)
* Disabled orte_wait, opal_few, and opal_daemon_init code on
platforms without fork, waitpid support. All non-init functions
will return OPMI_ERR_NOT_SUPPORTED
* Disable orteprobe tool when fork or pipe aren't supported
This commit was SVN r6490.
Red Storm. Add stub functions to ompi_config_bottom.h when they are
around
* Add protection for a bunch of #include <netinet/in.h>s
* Fix up the Portals BTL so that it compiles on Red Storm and has the
right mojo for initialization on Red Storm
* Add some important comments to ompi_check_package and mvapi configures
* Add support for platforms without getpwuid() (aka, Red Storm).
This commit was SVN r6478.
sockaddr_in - seems to be a good indicator)
* disable util/if code if no inet devices (again, no sockaddr_in)
* add enable/disable flag to disable stacktrace pretty-print code
(defaults to enabled). Seems there's something funky going on with
the preprocessor on Red Storm that was causing problems - this was
the easiest fix
* clean up a bunch of the configure.m4 files to remove bogus comments,
properly comment them, fix the dumb logic for happy/unhappy
* Create a macro for testing both header and library for a package,
since we seem to do this kind of test quite often. Handles the
-I and -L search paths properly (including stripping out /usr and
/usr/local if not needed)
* Converted mvapi components to configure.m4, using the nice new
ompi_check_package macro (above)
This commit was SVN r6454.
threads (basically, same as before, but we now link the right thread
libraries).
* Add disable-io-romio flag to disable compiling ROMIO
* Migrathe mvapi btl from configure.stub to configure.m4
This commit was SVN r6453.
components to succeed with --enable-dist. Instead, just add them to
all_components and make dist will still work - we're going to stamp out
the Makefiles no matter what
* Add missing header to ob1 pml for make dist
* Clean up the Portals BTL configure code
This commit was SVN r6413.
frameworks, and components without configure scripts instead of
hard-coded shell variables (for projects and frameworks) and
shell variable building (for components).
* Add 3rd category of component configuration (in addition to configure
scripts and no-configured components): configure.m4 components. These
components can only be built as part of OMPI (like no-configure), but
can provide an m4 file that is run as part of the main configure
script. These macros can set whether the component should be built,
along with just about any other configuration wanted. More care must
be taken compared to configure components, as doing things like setting
variables or calling AC_MSG_ERROR now affects the top-level configure
script (so calling AC_MSG_ERROR if your component can't configure
probably isn't what you want)
* Added support to autogen.sh for the configure.m4-style components,
as well as building up the m4_define lists ompi_mca.m4 now expects
* Updated a number of macros to be more config.cache friendly (both
so that config.cache can be used and so the test can be quickly
run multiple times in the same configrue script):
- ompi_config_asm
- c_weak_symbols
- c_get_alignment
* Added new macros to be shared when configuring components:
- ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...)
- ompi_check_xgrid
- ompi_check_tm
- ompi_check_bproc
* Updated a number of components to use configure.m4 instead of
configure.stub
- btl portals
- io romio
- tm ras and pls
- bjs, lsf_bproc ras and bproc_seed pls
- xgrid ras and pls
- null iof (used by tm)
This commit was SVN r6412.
- After long discussions and ruminations on how we run components in
LAM/MPI, made the decision that, by default, all components included
in Open MPI will use the version number of their parent project
(i.e., OMPI or ORTE). They are certaint free to use a different
number, but this simplification makes the common cases easy:
- components are only released when the parent project is released
- it is easy (trivial?) to distinguish which version component goes
with with version of the parent project
- removed all autogen/configure code for templating the version .h
file in components
- made all ORTE components use ORTE_*_VERSION for version numbers
- made all OMPI components use OMPI_*_VERSION for version numbers
- removed all VERSION files from components
- configure now displays OPAL, ORTE, and OMPI version numbers
- ditto for ompi_info
- right now, faking it -- OPAL and ORTE and OMPI will always have the
same version number (i.e., they all come from the same top-level
VERSION file). But this paves the way for the Great Configure
Reorganization, where, among other things, each project will have
its own version number.
So all in all, we went from a boatload of version numbers to
[effectively] three. That's pretty good. :-)
This commit was SVN r6344.
so that I can next rename all the files under mca/btl using "svn mv" which is
not possible until after the initial "svn mv bmi btl" is checked in.
This commit was SVN r6220.
* If we are on solaris, don't use the system qsort(), as it appears to be
broken in 64 bit mode on Solaris 8 (there are bugs about this in
SunSolve). Instead, use ompi_qsort(), which is taken from FreeBSD.
A #define in ompi_config_bottom.h makes this invisible to most of the
OMPI source tree.
* Fix memory badness in ompi_progress_register where we were reallocing the
array to be number of elements long instead of number of elements *
sizeof(element). Found while using bcheck to track down our problems in
64 bit on big endian machines.
* The debugging output code in session_dir.c could pass NULL as a value for a %s,
which will turn into "(null)" automagically on glibc, but causes segfaults for
older libcs (like those on Solaris). Check for this case in session_dir.c and
don't pass NULL as a %s value into ompi_output().
* Fix missing header file in convertor.c
This commit was SVN r6186.
function names with the GSYM (like we should be)
* Add support for PPC64/Linux in atomics
This should go to the beta branch.
This commit was SVN r6163.
I'm contributing patches for configure.ac and f90_check_type.m4.
The problem was that f90_check_type returned an exit code
and not all compilers actually do this. The fix tries to compile the
type and fails if it can't. The problem is that some compilers will
happily return a default kind if the particular kind is not supported.
So the real test is whether the size of the datatype is as expected.
This commit was SVN r6101.
[10.4] with gfortran 4.0) who need to be able to add flags to compile
simple Fortran executables that use libc routines.
Notably, for Tiger with gfortran 4.0 installed, you'll need to:
./configure F77=gfortran FC=gfortran LIBS=-lSystemStubs
This commit was SVN r5909.
- Fully support REAL*N, INTEGER*N, and COMPLEX*N in the MPI_Op
reduction operations.
- Update ddt to fully support these types as well, to include using
the results of sizes and alignments determined by configure
- Discover the goodness of m4 and consolidate a LOT of configure code
(i.e., remove a lot of essentially duplicated code and
m4-subroutine-ize it). The big kicker was figuring out how to
parameterize AC_DEFINE_UNQUOTED, which you can do if you use m4
properly.
- If we don't support a given INTEGER*N, REAL*N, or COMPLEX*N, don't
error. Just set the right flags so that we don't support them in
the MPI layer.
This commit was SVN r5788.
- Check for icc-8.1 segfaulting with varargs.
- Add check for size of REAL*4,8,16 types and purge,
if smaller
- Fix configure-output with regard to checking for c-types
for the REAL*-types.
This commit was SVN r5661.
biggie), so we gain nothing there. On 10.4, it's implemented directly,
but doesn't support devices (which messes up pty support and IO
forwarding).
This commit was SVN r5621.
