arrays.
The MPI 3.0 standard added const to all in buffers in the C bindings. This
commit adds the const keyword and in most cases casts const away. We will
eventually should go through and update the various interfaces (coll, pml,
io, etc) to take the const keyword. The group, comm, win, and datatype
interfaces have been updated with const.
cmr=v1.7.4:ticket=trac:3785:reviewer=jsquyres
This commit was SVN r29266.
The following Trac tickets were found above:
Ticket 3785 --> https://svn.open-mpi.org/trac/ompi/ticket/3785
be applied. Correct the MPI validation process of the
MPI_Accumulate arguments.
Fix another potential problem not yet reported. If we convert the
MPI datatypes direclty into OPAL datatypes, we will restrict their
number to the locally different types. Which might not be identical
on the remote node, if we are in a heterogeneous environment. So,
for MPI One sided only deal with MPI level types, never simplify
them on OPAL types (at least on the args). The unfortunate
outcome is that we need to create the args for all datatypes.
This commit was SVN r24466.
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
Some MPI C interface files saw some spacing changes to conform to the coding standards of Open MPI.
Changed MPI C interface files to use {{{OPAL_CR_ENTER_LIBRARY()}}} and {{{OPAL_CR_EXIT_LIBRARY()}}} instead of just {{{OPAL_CR_TEST_CHECKPOINT_READY()}}}. This will allow the checkpoint/restart system more flexibility in how it is to behave.
Fixed the configure check for {{{--enable-ft-thread}}} so it has a know dependance on {{{--enable-mpi-thread}}} (and/or {{{--enable-progress-thread}}}).
Added a line for Checkpoint/Restart support to {{{ompi_info}}}.
Added some options to choose at runtime whether or not to use the checkpoint polling thread. By default, if the user asked for it to be compiled in, then it is used. But some users will want the ability to toggle its use at runtime.
There are still some places for improvement, but the feature works correctly. As always with Checkpoint/Restart, it is compiled out unless explicitly asked for at configure time. Further, if it was configured in, then it is not used unless explicitly asked for by the user at runtime.
This commit was SVN r17516.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
to pass some of the tests provided by Sun. These will, of course, greatly
slow down calls to MPI_ACCUMULATE, but there's no way to pass the test
suite without them :/.
Refs trac:760
This commit was SVN r13117.
The following Trac tickets were found above:
Ticket 760 --> https://svn.open-mpi.org/trac/ompi/ticket/760
* use one-sided datatype check instead of send/receive and check both
the origin and target datatypes
* allow error handler to be set on MPI_WIN_NULL, per standard
* Allow recursive calls into the pt2pt osc component's progress
function
* Fix an uninitialized variable problem in the unlock header
This commit was SVN r12667.
* Print a warning error message if a target is not in an exposure epoch
and an update is received. This results in the app continuing with
that call having never happened, rather than evil hangs.
refs trac:325
This commit was SVN r11514.
The following Trac tickets were found above:
Ticket 325 --> https://svn.open-mpi.org/trac/ompi/ticket/325
full argument checking (allowing that MPI_PROC_NULL is legal, of course).
Only after the argument checking do we shortcut. Fixes trac:237, which
was caused by moving the MPI_PROC_NULL test in MPI_Bsend_init,
but not allowing for MPI_PROC_NULL when checking rank.
This commit was SVN r11108.
The following SVN revision numbers were found above:
r10972 --> open-mpi/ompi@31c66d92aa
The following Trac tickets were found above:
Ticket 237 --> https://svn.open-mpi.org/trac/ompi/ticket/237
you can't be in a post and a start at the same time, and that is clearly
legal to do
* Fix interptretation of when the epochs start for MPI_Fence. Only start
an epoch if communication actually occurs, otherwise it isn't actually
an epoch. I don't know who thought that wording in the MPI standard
was a good idea, but can't change it now...
This commit was SVN r9139.
MPI-2:6.3.4 says about reduction operations
* Have the point-to-point one-sided component spew a warning and return
an error if a non-predefined datatype is used with an MPI_OP other
than MPI_REPLACE. Yes, this violates the MPI standard, but it's the
best we can do until George and I implement support for figuring out
where all the locations to update are..
This commit was SVN r9134.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
* Implement fortran handle -> c handle tracking
* Remove some unneeded locking around free lists (the free list
macros do their own locking)
* Try to be a bit more memory friendly with the w_mode setting /
checking
This commit was SVN r8865.
complete, but stable enough that it will have no impact on general development,
so into the trunk it goes. Changes in this commit include:
- Remove the --with option for disabling MPI-2 onesided support. It
complicated code, and has no real reason for existing
- add a framework osc (OneSided Communication) for encapsulating
all the MPI-2 onesided functionality
- Modify the MPI interface functions for the MPI-2 onesided chapter
to properly call the underlying framework and do the required
error checking
- Created an osc component pt2pt, which is layered over the BML/BTL
for communication (although it also uses the PML for long message
transfers). Currently, all support functions, all communication
functions (Put, Get, Accumulate), and the Fence synchronization
function are implemented. The PWSC active synchronization
functions and Lock/Unlock passive synchronization functions are
still not implemented
This commit was SVN r8836.
