Add new mca params to test:
orte_debugger_test_daemon: Name of the executable to be used to simulate a debugger colaunch
orte_debugger_test_attach: Test debugger colaunch after debugger attachment
To test co-launch at job start, just set the orte_debugger_test_daemon param.
To test co-launch upon attach:
set orte_debugger_test_daemon
set orte_debugger_test_attach=1
set orte_enable_debug_cospawn_while_running=1
set orte_debugger_check_rate=<N> - defines the number of seconds to wait before "checking" for a debugger attaching
Added a "debugger" program to orte/test/mpi that just spins to simulate a debugger daemon.
This commit was SVN r23144.
1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis
2. orte_max_local_restarts - default max number of local restarts, can be overridden
3. orte_max_global_restarts - default max number of relocates, can be overridden
Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code.
This commit was SVN r23057.
1. default -npersocket to force -bind-to-socket
2. if we cannot get a value for cores/socket, try using #logical cpus. otherwise, default to 1 core
3. add missing error message for not-enough-processors
4. since we no longer loop through orte_register_params twice, put the auto-detect of
topology info in the rte_init for hnp and std_orted
5. fix bind-to-core, bysocket combination
This commit was SVN r21992.
The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system.
This commit was SVN r21975.
1. finalize the logic for properly respecting externally assigned bindings. Thanks to Chris Samuel for his help with this. Still needs some acid testing, but appears to now work.
2. remove the double-logic of requiring opal_paffinity_alone AND bind-to-foo. If the user specifies bind-to-foo, trust her and just do it.
This commit was SVN r21885.
Add a capability to parse the rankfile to extract node information in place of requiring both hostfile and rankfile for non-RM managed environments. The rankfile is -only- parsed for this IF the hostfile and -host options are not given. Otherwise, those are used to establish allocation info as we did before this commit.
This commit was SVN r21815.
Adds several new mpirun options:
* -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding.
* -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned.
* -bind-to-core - currently the default behavior (maintained from prior default)
* -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile
Similar features/options are provided at the board level for multi-board nodes.
Documentation to follow...
This commit was SVN r21791.
Adapt orte_process_info to orte_proc_info, and
change orte_proc_info() to orte_proc_info_init().
- Compiled on linux-x86-64
- Discussed with Ralph
This commit was SVN r20739.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
1. fix a race condition whereby a proc's output could trigger an event prior to the other outputs being setup, thus c ausing the IOF to declare the proc "terminated" too early. This was really rare, but could happen.
2. add a new "timestamp-output" option that timestamp's each line of output
3. add a new "output-filename" option that redirects each proc's output to a separate rank-named file.
4. add a new "xterm" option that redirects the output of the specified ranks to a separate xterm window.
This commit was SVN r20392.
SIGCONT to the a.outs. By default, they are not forwarded and
the behavior remains as it has always been. However, if one
runs with --mca orte_forward_job_control 1, then mpirun will
catch those two signals and forward them to the orteds which
will deliver them to the a.outs. We have had requests for
this feature.
This commit was SVN r20391.
Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects.
This commit was SVN r20219.
Too much complexity - just put the name in the default mca param file iff you actually have a default hostfile.
This commit was SVN r20129.
The following SVN revision numbers were found above:
r20128 --> open-mpi/ompi@ea01da0eee
1. completely and cleanly separates responsibilities between the HNP, orted, and tool components.
2. removes all wireup messaging during launch and shutdown.
3. maintains flow control for stdin to avoid large-scale consumption of memory by orteds when large input files are forwarded. This is done using an xon/xoff protocol.
4. enables specification of stdin recipients on the mpirun cmd line. Allowed options include rank, "all", or "none". Default is rank 0.
5. creates a new MPI_Info key "ompi_stdin_target" that supports the above options for child jobs. Default is "none".
6. adds a new tool "orte-iof" that can connect to a running mpirun and display the output. Cmd line options allow selection of any combination of stdout, stderr, and stddiag. Default is stdout.
7. adds a new mpirun and orte-iof cmd line option "tag-output" that will tag each line of output with process name and stream ident. For example, "[1,0]<stdout>this is output"
This is not intended for the 1.3 release as it is a major change requiring considerable soak time.
This commit was SVN r19767.
Theoretically, any PLM could use this - but in reality, all of them except rsh/ssh already leave the session attached anyway.
This fixes trac:656 - a REALLY old ticket
This commit was SVN r19294.
The following Trac tickets were found above:
Ticket 656 --> https://svn.open-mpi.org/trac/ompi/ticket/656
Provide support for four MPIR extensions that allow specification of debugger daemon executable, argv for the debugger daemon, whether or not to forward debugger daemon IO, and whether or not debugger daemon will piggy-back on ORTE OOB network. Last is not yet implemented.
No change in behavior or operation occurs unless (a) the debugger specifically utilizes the extensions and, for co-locate while running, the user specifically enables the capability via an MCA param. Two of the MPIR extensions supported here are used in a widely-used debugger for a large-scale installation. The other two extensions are new and being utilized in prototype work by several debuggers for possible future release.
This commit was SVN r19275.
Since OMPI allows mpirun to default to the local node, and since users want to retain the option to co-locate procs with mpirun, we needed another param to block this error case.
This commit was SVN r19135.
set when it launches under debuggers using the --debug option.
This commit was SVN r19116.
The following Trac tickets were found above:
Ticket 1361 --> https://svn.open-mpi.org/trac/ompi/ticket/1361
Standardize the handling of the orte launch agent option across PLMs. This has been a consistent complaint I have received - each PLM would register its own MCA param to get input on the launch agent for remote nodes (in fact, one or two didn't, but most did). This would then get handled in various and contradictory ways.
Some PLMs would accept only a one-word input. Others accepted multi-word args such as "valgrind orted", but then some would error by putting any prefix specified on the cmd line in front of the incorrect argument.
For example, while using the rsh launcher, if you specified "valgrind orted" as your launch agent and had "--prefix foo" on you cmd line, you would attempt to execute "ssh foo/valgrind orted" - which obviously wouldn't work.
This was all -very- confusing to users, who had to know which PLM was being used so they could even set the right mca param in the first place! And since we don't warn about non-recognized or non-used mca params, half of the time they would wind up not doing what they thought they were telling us to do.
To solve this problem, we did the following:
1. removed all mca params from the individual plms for the launch agent
2. added a new mca param "orte_launch_agent" for this purpose. To further simplify for users, this comes with a new cmd line option "--launch-agent" that can take a multi-word string argument. The value of the param defaults to "orted".
3. added a PLM base function that processes the orte_launch_agent value and adds the contents to a provided argv array. This can subsequently be harvested at-will to handle multi-word values
4. modified the PLMs to use this new function. All the PLMs except for the rsh PLM required very minor change - just called the function and moved on. The rsh PLM required much larger changes as - because of the rsh/ssh cmd line limitations - we had to correctly prepend any provided prefix to the correct argv entry.
5. added a new opal_argv_join_range function that allows the caller to "join" argv entries between two specified indices
Please let me know of any problems. I tried to make this as clean as possible, but cannot compile all PLMs to ensure all is correct.
This commit was SVN r19097.
Add ability for sys admins to prohibit putting session directories under specified locations. Thus, they can now protect parallel file systems from foolish user mistakes.
This commit was SVN r18721.
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
