- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
several header files (previously included by header-files)
now have to be moved "upward".
This is mainly system headers such as string.h, stdio.h and for
networking, but also some orte headers.
This commit was SVN r21095.
The modified cmd line options are:
--report-uri x where x is either '-' for stdout, '+' for stderr, or a filename
--report-pid x where x is the same as above
For orte-top, you can now provide either a pid or a uri (which allows connection to remote mpiruns), specified either directly or with a "file:x" option as per mpirun's ompi-server option.
Note: I did not add a report-pid option to ompi-server as it probably wouldn't be useful - the report-uri option works as well, and allows remote access (which is likely the normal way it would be used).
This commit was SVN r20168.
Enable one mpirun to act as the server for another mpirun when doing MPI_Publish_name and its associated operations. The user is responsible, of course, for ensuring that the mpirun acting as a server outlives any mpiruns using it in that capacity.
Add a cmd line option to mpirun --report-pid that prints out mpirun's pid. Allow the --ompi-server option to now take pid:# (or PID:#) of the mpirun to be used as the server, and then look that pid up by searching the local mpirun contact infos for it.
This commit was SVN r20102.
1. completely and cleanly separates responsibilities between the HNP, orted, and tool components.
2. removes all wireup messaging during launch and shutdown.
3. maintains flow control for stdin to avoid large-scale consumption of memory by orteds when large input files are forwarded. This is done using an xon/xoff protocol.
4. enables specification of stdin recipients on the mpirun cmd line. Allowed options include rank, "all", or "none". Default is rank 0.
5. creates a new MPI_Info key "ompi_stdin_target" that supports the above options for child jobs. Default is "none".
6. adds a new tool "orte-iof" that can connect to a running mpirun and display the output. Cmd line options allow selection of any combination of stdout, stderr, and stddiag. Default is stdout.
7. adds a new mpirun and orte-iof cmd line option "tag-output" that will tag each line of output with process name and stream ident. For example, "[1,0]<stdout>this is output"
This is not intended for the 1.3 release as it is a major change requiring considerable soak time.
This commit was SVN r19767.
During the discussion of MPI-2 functionality, it was pointed out by Aurelien that there was an inherent race condition between startup of ompi-server and mpirun. Specifically, if someone started ompi-server to run in the background as part of a script, and then immediately executed mpirun, it was possible that an MPI proc could attempt to contact the server (or that mpirun could try to read the server's contact file before the server is running and ready.
At that time, we discussed createing a new tool "ompi-wait-server" that would wait for the server to be running, and/or probe to see if it is running and return true/false. However, rather than create yet another tool, it seemed just as effective to add the functionality to mpirun.
Thus, this commit creates two new mpirun cmd line flags (hey, you can never have too many!):
--wait-for-server : instructs mpirun to ping the server to see if it responds. This causes mpirun to execute an rml.ping to the server's URI with an appropriate timeout interval - if the ping isn't successful, mpirun attempts it again.
--server-wait-time xx : sets the ping timeout interval to xx seconds. Note that mpirun will attempt to ping the server twice with this timeout, so we actually wait for twice this time. Default is 10 seconds, which should be plenty of time.
This has only lightly been tested. It works if the server is present, and outputs a nice error message if it cannot be contacted. I have not tested the race condition case.
This commit was SVN r19152.
Restore the "do-not-launch" functionality so users can test a mapping without launching it.
Add a "do-not-resolve" cmd line flag to mpirun so the opal/util/if.c code does not attempt to resolve network addresses, thus enabling a user to test a hostfile mapping without hanging on network resolve requests.
Add a function to hostfile to generate an ordered list of host names from a hostfile
This commit was SVN r18190.
The change also:
- cleans up and simplifies the command line processing code
- adds an error output if more than one hostfile passed for a single app context
- gets rid of the superfluous orte_app_context_map_t type, and instead use a simple argv of -host options
This commit was SVN r17750.
The following Trac tickets were found above:
Ticket 1124 --> https://svn.open-mpi.org/trac/ompi/ticket/1124
This commit introduces the necessary logic to avoid that conflict. If a PLS component can identify that a daemon has failed, then we will set a flag indicating that fact. The xcast system will subsequently check that flag and, if it is set, will send all messages direct to the recipient. In the case of "kill local procs" and "terminate", the messages will go directly to each orted, thus bypassing any orted that has failed.
In addition, the xcast system will -not- wait for the messages to complete, but will return immediately (i.e., operate in non-blocking mode). Orterun will wait (via an event timer) for a period of time based on the number of daemons in the system to allow the messages to attempt to be delivered - at the end of that time, orterun will simply exit, alerting the user to the problem and -strongly- recommending they run orte-clean.
I could only test this on slurm for the case where all daemons unexpectedly died - srun apparently only executes its waitpid callback when all launched functions terminate. I have asked that Jeff integrate this capability into the OOB as he is working on it so that we execute it whenever a socket to an orted is unexpectedly closed. Meantime, the functionality will rarely get called, but at least the logic is available for anyone whose environment can support it.
This commit was SVN r16451.
* Fix some missing includes in a few places.
* Add the cr_request() functionality to the BLCR CRS component.
We are now dependent upon the 0.6.* series of BLCR.
* Made the CR notification mechanism a registered function.
This way we can have an OPAL-only version and it can be replaced at
runtime with the ORTE version.
* Add a 'opal_cr_allow_opal_only' parameter that will enable OPAL-only
CR functionality when the user wants it. Default: Disabled.
* Fix the placement of a checkpoint request check in MPI_Init
* Pull the OPAL notification mechanism into the SnapC framework.
* We no longer fork/exec the 'opal-checkpoint' command for local
checkpointing, the Local coordinator in the orted does this directly.
* The Local and Application coordinator talk together bypassing the OPAL
notifiation mechanism.
* Optimized the Local <-> App Coordinator communication.
* Improved the structure used to track vpid_snapshots in the local coord.
* Fix a race condition in which an application under heavy communication load
may produce an inconsistent global checkpoint.
This commit was SVN r16389.
* Making some symbols and types be global (vs. static) in orterun
* Adding a "ddt" entry in the MCA parameter orte_base_user_debugger
default value
* Add support for @executable@, @executable_argv@, and @single_app@
tokens in the orte_base_user_debugger MCA parameter.
* Added various error checks and corresponding help messages after
finding a debugger in the PATH
Fixes trac:1081
This commit was SVN r15323.
The following Trac tickets were found above:
Ticket 1081 --> https://svn.open-mpi.org/trac/ompi/ticket/1081
