btl_sm.c: In function ‘mca_btl_sm_sendi’:
btl_sm.c:734: warning: comparison between signed and unsigned
btl_sm.c: In function ‘mca_btl_sm_send’:
btl_sm.c:812: warning: comparison between signed and unsigned
This commit was SVN r21552.
The following SVN revision numbers were found above:
r21551 --> open-mpi/ompi@bd995d26b4
- poll FIFO occasionally even if just sending messages
- retry pending sends more often
- just before trying a new send
- as part of mca_btl_sm_component_progress
Maintain two new mca_btl_sm_component variables, num_outstanding_frags
and num_pending_sends, to keep overhead low.
Drain only one message fragment from the FIFO per btl_sm_component_progress
call (rather than drain until empty, which in retrospect everyone considers
to have been a mistake).
This commit was SVN r21551.
This commit was SVN r21533.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r21524
(now works on both big and little endian machines)
* Be a little more flexible when looking for active devices in
btl_openib_component.c
* Add device name and port number to lots of verbose and help
messages
* Add a bunch of verbose messages to give insight into what is
occurring during all the CPC wireups
This commit was SVN r21418.
the debugger plugins into files suffixed by _dbg.h.
This commit was SVN r21404.
The following Trac tickets were found above:
Ticket 1931 --> https://svn.open-mpi.org/trac/ompi/ticket/1931
Yes, friends, our favorite PCIE BTL has resurfaced as mgmt vacillates over its existence. This is an updated version that actually mostly works, in its final stages of debugging.
Some generalization still remains to be done...
This commit was SVN r21358.
not end up in OPAL
- Will post an updated patch for the OMPI_ALIGNMENT_ parts (within C).
This commit was SVN r21342.
The following SVN revision numbers were found above:
r21330 --> open-mpi/ompi@95596d1814
into the OPAL namespace, eliminating cases like opal/util/arch.c
testing for ompi_fortran_logical_t.
As this is processor- and compiler-related information
(e.g. does the compiler/architecture support REAL*16)
this should have been on the OPAL layer.
- Unifies f77 code using MPI_Flogical instead of opal_fortran_logical_t
- Tested locally (Linux/x86-64) with mpich and intel testsuite
but would like to get this week-ends MTT output
- PLEASE NOTE: configure-internal macro-names and
ompi_cv_ variables have not been changed, so that
external platform (not in contrib/) files still work.
This commit was SVN r21330.
well..)
- As Jeff suggested, for m4 macros, dont use _ OPAL, but
rather OPAL_ prefix
- Set the variable before AC_SUBST, so that replacement happens
in f77 header-file, too.
This commit was SVN r21316.
happens when hierarch is used. . Two major items:
- modify the comm_activate step to take an additional argument, indicating
whether the new communicatio has to go through the collective selection
step. This is not required sometimes (e.g. when a process calls
MPI_COMM_SPLIT with color=MPI_UNDEFINED), and contributed significantly to
the exhaustion of cids.
- when freeing a communicator, check whether we can reuse the block of cids
assigned to that comm. This only works if the current front of the cid
assignment (cid_block_start) is right ater the block of cids assigned to this
comm.
Fixes trac:1904
Fixes trac:1926
This commit was SVN r21296.
The following Trac tickets were found above:
Ticket 1904 --> https://svn.open-mpi.org/trac/ompi/ticket/1904
Ticket 1926 --> https://svn.open-mpi.org/trac/ompi/ticket/1926
shm_fifos values are only partially updated, and this leads to wrong values
for the offset. Moving the write barrier at the right place, plus forcing
some read barriers might help.
In addition I get rid of the sm_offset array which is completely useless.
This commit was SVN r21253.
for printing size_t use "%lu" and cast to (unsigned long).
This commit was SVN r21238.
The following SVN revision numbers were found above:
r21234 --> open-mpi/ompi@22b6177fb9
I just found that we have 2 place where we call for XRC domain
creation. First one in init_one_device() and second one prepare_device_for_use().
They have absolutely identical code, but the call in init_one_device() is useless
because on this stage we don't know about QP configuration and we don't know if we need
XRC at all. So I removing the duplicated code from init_one_device().
This commit was SVN r21235.
for us already.
* Slightly clarify the error message strings; now they match the new
error strings for btl_openib_ipaddr_in|exclude
This commit was SVN r21197.
subnet specifications (in addition to interface names). These
parameters now take a comma-delimited list of interfaces names and/or
a.b.c.d/x specifications (only IPv4 currently supported for subnet
specifications). For example:
mpirun --mca btl_tcp_if_include 10.10.30.0/8,eth0
This commit was SVN r21189.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
malloc buffer for ompi_info_get one character larger for the NUL-termination
See comment in ompi/mpi/c/info_get.c or MPI-2.1 p289
This commit was SVN r21154.
Well, well, just do not "call" ompi_comm_rank twice but rather
reuse variable...
- Fix Coverity CID 1262:
Using uninitialized value "(statuses[err_index]).MPI_ERROR"
Sure, these statuses are only initialized after ompi_request_wait_all,
so introduce a short-circuit label to jump to...
This commit was SVN r21153.
to happen
* Properly error out (rather than cause buffer overflow) in case where
the datatype packed description is larger than our control fragments.
This still isn't standards conforming, but at least we know what
happened.
* Expose win_set_name to external libraries (like the osc modules)
* Set default window name to the CID of the communcator it's using
for communication
Refs trac:1905
This commit was SVN r21134.
The following Trac tickets were found above:
Ticket 1905 --> https://svn.open-mpi.org/trac/ompi/ticket/1905
Nothing notable, except mtl_base_datatype.h -- Undo change from r21096:
Yes, we should not include datatype_internal.h, but we did and we have to:
we derefence desc, and get an incomplete type, otherwise.
This commit was SVN r21103.
The following SVN revision numbers were found above:
r21096 --> open-mpi/ompi@221fb9dbca
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
several header files (previously included by header-files)
now have to be moved "upward".
This is mainly system headers such as string.h, stdio.h and for
networking, but also some orte headers.
This commit was SVN r21095.
This fixes a bug that can happen when checkpointing while one process is in such a routine. Previously a warning was thrown.
This commit was SVN r21080.
and mo'bettah. Put in lengthy comments explaining what's going on.
We might still want to tweak this some more, but we can no longer get
IMB-EXT to hang with this new code anymore (e.g., even without eager
RDMA -- we discovered after the fact that the code in the v1.3.2
release will hang if eager RDMA is disabled).
Fixes trac:1890. Really.
This commit was SVN r21061.
The following Trac tickets were found above:
Ticket 1890 --> https://svn.open-mpi.org/trac/ompi/ticket/1890
_endpoint_post_send(), which could result in an infinite loop (see the
comment in the code).
This is part one of a proper fix; it's suitable for the v1.3 tree and
for an immediate release. Pasha and I plan to spend a little more
time and clean up this stuff properly, but it does not need to be
included in v1.3.2.
This commit was SVN r21047.
The following Trac tickets were found above:
Ticket 1890 --> https://svn.open-mpi.org/trac/ompi/ticket/1890
were looking for. This makes the openib btl fail a little more
gracefully (for example) if you specify a bogus value to
btl_openib_mpool.
Thanks to Roberto Ammendola for identifying the exact issue.
This commit was SVN r21044.
We currently apply all of the MCA params in the parent job to the child. This commit allows a user to specify additional params for the child job, and to override any pre-existing params with the new value so they can better control behavior of the child job.
This commit was SVN r20989.
needs is to be involved in the RMA completion process, which is insured
by the MCA_BTL_DES_SEND_ALWAYS_CALLBACK flag. Fixes trac:1875.
This commit was SVN r20983.
The following Trac tickets were found above:
Ticket 1875 --> https://svn.open-mpi.org/trac/ompi/ticket/1875
event driver, and if there are no event generated by the BTLs ... well
nothing happens (i.e there is no progress at the PML level and all
pending fragments remain pending). By forcing the BTL to trigger the
callbacks for all ACK and FIN, we give more opportunities to the PML
to do real progress, but we pay this in terms of performance.
This commit was SVN r20953.
FIN message to the pending list when the send fails. Therefore, any
upper level function is not required to add it.
Make sure we don't send the FIN twice.
This commit was SVN r20952.
two of my testing machines. The fix require both commits!
This commit was SVN r20947.
The following SVN revision numbers were found above:
r20946 --> open-mpi/ompi@e2bb4c9b8f
we returned the pck before coping the values out. With this change
it seems to work at least on two architectures (even with the
mpool size set back to 0).
This commit was SVN r20946.
and https://svn.open-mpi.org/trac/ompi/ticket/1853, mallopt() hints do
not always work -- it is possible for memory to be returned to the OS
and therefore OMPI's registration cache becomes invalid.
This commit removes all use of mallopt() and uses a different way to
integrate ptmalloc2 than we have done in the past. In particular, we
use almost exactly the same technique as MX:
* Remove all uses of mallopt, to include the opal/memory mallopt
component.
* Name-shift all of OMPI's internal ptmalloc2 public symbols (e.g.,
malloc -> opal_memory_ptmalloc2_malloc).
* At run-time, use the existing glibc allocator malloc hook function
pointers to fully hijack the glibc allocator with our own
name-shifted ptmalloc2.
* Make the decision whether to hijack the glibc allocator ''at run
time'' (vs. at link time, as previous ptmalloc2 integration
attempts have done). Look at the OMPI_MCA_mpi_leave_pinned
and OMPI_MCA_mpi_leave_pinned_pipeline environment variables and
the existence of /sys/class/infiniband to determine if we should
install the hooks or not.
* As an added bonus, we can now tell if libopen-pal is linked
statically or dynamically, and if we're linked statically, we
assume that munmap intercept support doesn't work.
See the opal/mca/memory/ptmalloc2/README-open-mpi.txt file for all the
gory details about the implementation.
Fixes trac:1853.
This commit was SVN r20921.
The following Trac tickets were found above:
Ticket 1853 --> https://svn.open-mpi.org/trac/ompi/ticket/1853
generate mangled windex files. Made ompi-top.1 and ompi-iof.1 build
by default. Also, added the orte-top synonym to the ompi-top manpage.
This commit was SVN r20915.
MPI_ERR_IN_STATUS to be returned from any functions that return only one completed request
(few exception here: wait_some and wait_all and the test versions). As we use an wait_all
in these send_receive functions we should convert the MPI_ERR_IN_STATUS to the real
error, i.e. the one comming from the MPI_ERROR field in the status corresponding to the
failed request.
This commit was SVN r20907.
after each process create it's FIFOs but before they access the
peer's FIFOs. Second, replace a one way synchronization by a real
barrier, so we know that every process is really where we expect
them to be.
This commit was SVN r20906.
* Ensure we don't try to do opal_list_get_next() on an item we just
deleted
* set myaddrs = NULL when we're done with it, just for good measure
Once this is ported to OMPI v1.3 branch, it fixes
https://bugs.openfabrics.org/show_bug.cgi?id=1579.
This commit was SVN r20896.
Add two new configure options that specify:
1. when to add padding to the openib control header - this *only* happens when the configure option is specified
2. when to use the dr-like checksum as opposed to the memcpy checksum. Not selectable at runtime - to eliminate performance impacts, this is a configure-only option
Also removed an unused checksum version from opal/util/crc.h.
The new component still needs a little cleanup and some sync with recent ob1 bug fixes. It was created as a separate module to avoid performance hits in ob1 itself, though most of the code is duplicative. The component is only selectable by either specifying it directly, or configuring with the dr-like checksum -and- setting -mca pml_csum_enable_checksum 1.
Modify the LANL platform files to take advantage of the new module.
This commit was SVN r20846.
expected length of the message) we should use the source and tag from the message header
instead of the value from the status structure attached to the request.
-This line, and those below, will be ignored--
M pml_ob1_recvreq.c
This commit was SVN r20844.
- This patch solely _adds_ required headers and is rather localized
The next patch (after RFC) heavily removes headers (based on script)
- ompi/communicator/communicator.h: For sources that use
ompi_mpi_comm_world, don't require them to include "mpi.h"
- ompi/debuggers/ompi_common_dll.c: mca_topo_base_comm_1_0_0_t needs
#include "ompi/mca/topo/topo.h"
- ompi/errhandler/errhandler_predefined.h:
ompi/communicator/communicator.h depends on this header file!
To prevent recursion just have fwd declarations.
#include "ompi/types.h" for fwd declarations of the main structs.
- ompi/mca/btl/btl.h: #include "opal/types.h" for ompi_ptr_t
- ompi/mca/mpool/base/mpool_base_tree.c: We use ompi_free_list_t and
ompi_rb_tree_t, so have the proper classes
- ompi/mca/op/op.h:
Op is pretty self-contained: Nobody up to now has done
#include "opal/class/opal_object.h"
- ompi/mca/osc/pt2pt/osc_pt2pt_replyreq.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/base/base.h:
We use opal_lists
- ompi/mca/pml/dr/pml_dr_vfrag.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/ob1/pml_ob1_hdr.h:
#include "ompi/mca/btl/btl.h" for mca_btl_base_segment_t
- opal/dss/dss_unpack.c:
#include "opal/types.h"
- opal/mca/base/base.h:
#include "opal/util/cmd_line.h" for opal_cmd_line_t
- orte/mca/oob/tcp/oob_tcp.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp.h:
#include "opal/threads/threads.h" for opal_thread_t
- orte/mca/oob/tcp/oob_tcp_msg.c:
#include "opal/types.h"
- orte/mca/oob/tcp/oob_tcp_peer.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp_send.c:
#include "opal/types.h"
- orte/mca/plm/base/plm_base_proxy.c:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
- orte/mca/rml/base/rml_base_receive.c:
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/mca/rml/oob/rml_oob_recv.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/mca/rml/oob/rml_oob_send.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/runtime/orte_data_server.c
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/runtime/orte_globals.h:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
Tested on Linux/x86-64
This commit was SVN r20817.
without mpi.h we have no notion of MPI_SUCCESS...
- ompi/mca/btl/sm/btl_sm.h: ptrdiff_t needs stddef.h
- ompi/mca/mpool/base/: If we use opal_pointer_array_t,
better include the class header.
This commit was SVN r20816.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
Adapt orte_process_info to orte_proc_info, and
change orte_proc_info() to orte_proc_info_init().
- Compiled on linux-x86-64
- Discussed with Ralph
This commit was SVN r20739.
Anyway, this is blocking the move: do not include pml.h
if not really needed, aka none of the following used:
mca_pml
MCA_PML_CALL
OMPI_ANY_TAG
OMPI_ANY_SOURCE
OMPI_PROC_NULL
- Notable exceptions (deleting in one header->adding):
- ompi/mca/mtl/psm/
- ompi/mca/osc/rdma/
- ompi/mca/btl/openib/btl_openib_endpoint.c depended on
pml_base_sendreq.h
- Tested on Linux/x86-64, this time including make check
(thanks Jeff and Ralph)
This commit was SVN r20725.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
opal layer.
Add a check against a maximum (actually get rid of ifs internally to
opal_bitmap.c) -- the functionality to set the current maximum size
opal_bitmap_set_max_size() is currently only used in attribute.c
to set the maximum OMPI_FORTRAN_HANDLE_MAX...
Tested on linux/x86-64 with intel-tests with all_tests_no_perf_f
run with 6 procs.
Let's look into MTT as well...
This commit was SVN r20708.
a notifier module.
The Notifier framework was extended slightly to
convey more information about each event notice.
This works with the FTB v0.5 API.
To compile with FTB support, use --with-ftb=/path/to/ftb/install
CIFTS == Coordinated Infrastructure for Fault Tolerant Systems
FTB == Fault Tolerance Backplane
see http://wiki.mcs.anl.gov/cifts/index.php
This commit was SVN r20655.
Added a few comments and changed the return code after the FIFO write to be SUCCESS,
even if the FIFO write indicated an error. Such an error would only mean that the
FIFO was full, but the FIFO-write operation would still be queued. Therefore, the
PML should think of this as successful.
This commit was SVN r20644.
anyhow -- if oob functionality is neededm then orte/mca/oob/oob.h
Nevertheless compiles fine with -Wimplicit-function-declaration
This commit was SVN r20641.
Only proc_info.h-internal include file is opal/dss/dss_types.h
- In one case (orte/util/hnp_contact.c) had to add proc_info.h again.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
works fine, no errors.
Again, let's have MTT the last word.
This commit was SVN r20631.
Things should be working fine now with openib.
This commit was SVN r20618.
The following SVN revision numbers were found above:
r20617 --> open-mpi/ompi@d460264c79
* compute mmap-file size more wisely and pass requested size to allocator
* change MCA parameters:
- get rid of mpool_sm_per_peer_size
- get rid of mpool_sm_max_size
- set default mpool_sm_min_size to 0
* no longer pad sm allocations to page boundaries
* have sm_btl_first_time_init check return codes on free-list creations
Have mca_btl_sm_prepare_src() check to see if it can allocate an EAGER fragment
rather than a MAX fragment if the smaller size works.
Remove ompi/class/ompi_[circular_buffer_]fifo.h and references thereto.
Remove opal/util/pow2.[c|h] and references thereto.
This commit was SVN r20614.
deactivated by default. It is activated by setting either of the
following two MCA parameters to values greater than 0:
* coll_sync_barrier_before
* coll_sync_barrier_after
If !_before is >0, then the sync coll collective will insert itself
before the underlying collective operations and invoke a barrier
before every Nth barrier (N == coll_sync_barrier_before). Similar for
!_after. Note that N is a _per communicator_ value; not global to the
MPI process.
If both are 0 (which is the default), this component returns NULL for
the comm query, meaning that it is not insertted into the coll module
stack.
The intent of this component is to provide a a workaround for
applications with large numbers of collectives of short messages that
can cause unbounded unexpected messages. Specifically, it is possible
for some iterative collective communication patterns to cause
unbounded unexpected messages. Forcing a barrier before or after
every Nth collective operation would prevent that behavior by forcing
applications to synchronize (and thereby consume any outstanding
unexpected messages caused by collectives on the same communicator).
Open MPI still needs to bound unexpected messages resource consumption
at the receiver, but this is a viable workaround for at least some
symptoms of the problem.
Additionally, there has been anecdotal evidence of some applications
that "perfom better" when they put barriers after other collective
operations. This could be due to many factors -- including shortening
the unexpected message queue. Putting this component in Open MPI
allows people to try this with their own applications and give real
world feedback on this kind of behavior.
This commit was SVN r20584.
* The main thing done here is to convert from multiple FIFOs/queues per
receiver (each receiver has one FIFO for each sender) to a single FIFO/queue
per receiver (all senders sharing the same FIFO for a given receiver).
* This requires rewriting the FIFO support, so that
ompi/class/ompi_[circular_buffer_]fifo.h is no longer used and FIFO
support is instead in btl_sm.h.
* The number of FIFOs per receiver is actually an MCA tunable parameter,
but it appears that 1 or possibly 2 FIFOs (even for 112 local processes)
per receiver is sufficient.
This commit was SVN r20578.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
by r20496 for the sm BTL, openib BTL on iWarp, and the sm & sm2 coll modules.
This commit was SVN r20515.
The following SVN revision numbers were found above:
r20496 --> open-mpi/ompi@4cdf91a8d4
The prior ompi_proc_t structure had a uint8_t flag field in it, where only one
bit was used to flag that a proc was "local". In that context, "local" was
constrained to mean "local to this node".
This commit provides a greater degree of granularity on the term "local", to include tests
to see if the proc is on the same socket, PC board, node, switch, CU (computing
unit), and cluster.
Add #define's to designate which bits stand for which local condition. This
was added to the OPAL layer to avoid conflicting with the proposed movement of
the BTLs. To make it easier to use, a set of macros have been defined - e.g.,
OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in
the code base to clearly indicate which sense of locality is being considered.
All locations in the code base that looked at the current proc_t field have
been changed to use the new macros.
Also modify the orte_ess modules so that each returns a uint8_t (to match the
ompi_proc_t field) that contains a complete description of the locality of this
proc. Obviously, not all environments will be capable of providing such detailed
info. Thus, getting a "false" from a test for "on_local_socket" may simply
indicate a lack of knowledge.
This commit was SVN r20496.
we remembered to use strcasecmp() every time I see this entry in the
file... (we did, but I just don't want to have to keep remembering
that ;-) )
This commit was SVN r20461.
btl_openib_connect_rdmacm_reject_causes_connect_error (yes, it's
still long -- on purpose :-) )
* Add INI file parameter rdmacm_reject_causes_connect_error
* Now only treat CONNECT_ERROR events as a REJECT if:
* It's on a connection where we were expecting a REJECT, ''and''
* The MCA parameter is true ''or'' the INI parameter for this
device is true
* Set the INI parameter for true for the NE020
This commit was SVN r20459.
versions of the NE driver will report the OUI while others will report
the PCI ID. We'll put in the Intel values when we get them (may not
be for a few more weeks).
This commit was SVN r20457.
properly at all. NetEffect's current driver (OFED 1.4.0) will return
a CONNECT_ERROR event to the initiator rather than the REJECTED event.
Doh! Additionally -- unfortunately -- NetEffect's vendor_id and
vendor_part_id are reported as 0 in OFED 1.4.0, so we can't
automatically detect these cards and work around the problem. So all
we can do is add a new MCA parameter
(btl_openib_connect_rdmacm_ignore_connect_errors -- yes, it's long on
purpose ;-) ) that says that if we get a CONNECT_ERROR, bascially
treat it exactly as a REJECT for the WRONG_DIRECTION reason (which is
a "good" reject). This allows OMPI to function with NetEffect/Intel
cards on OFED 1.4.0.
Note that NetEffect has been bought by Intel; I'm waiting for
information from them to update the ini file for their new OUI/PCI
ID's and/or new vendor_part_id values.
This commit was SVN r20454.
Fix a mistake in the dpm that hardcoded the update of routes to the HNP. This needs to be done by the individual routing modules so they can take whatever action is required - which will usually include updating the HNP, but might not...and might include additional steps. New routing modules are coming that violated this assumption, so it had to be moved back into init_routes.
All current routed modules know what to do - anyone with routed modules not in the current trunk may need to adjust them (see any of the current routed modules for examples of what to do).
This commit was SVN r20427.
lock -- therefore move the OPAL_THREAD_UNLOCK after
the if-OMPI_ERR_TEMP_OUT_OF_RESOURCE block.
- As mca_rcache_rb_mru_delete is the only setter of rc, move the
error-check right after mca_rcache_rb_mru_delete.
- Removed a few nitty ompi/info/info.h and orte/util/show_help.h
This commit was SVN r20355.
* New "op" MPI layer framework
* Addition of the MPI_REDUCE_LOCAL proposed function (for MPI-2.2)
= Op framework =
Add new "op" framework in the ompi layer. This framework replaces the
hard-coded MPI_Op back-end functions for (MPI_Op, MPI_Datatype) tuples
for pre-defined MPI_Ops, allowing components and modules to provide
the back-end functions. The intent is that components can be written
to take advantage of hardware acceleration (GPU, FPGA, specialized CPU
instructions, etc.). Similar to other frameworks, components are
intended to be able to discover at run-time if they can be used, and
if so, elect themselves to be selected (or disqualify themselves from
selection if they cannot run). If specialized hardware is not
available, there is a default set of functions that will automatically
be used.
This framework is ''not'' used for user-defined MPI_Ops.
The new op framework is similar to the existing coll framework, in
that the final set of function pointers that are used on any given
intrinsic MPI_Op can be a mixed bag of function pointers, potentially
coming from multiple different op modules. This allows for hardware
that only supports some of the operations, not all of them (e.g., a
GPU that only supports single-precision operations).
All the hard-coded back-end MPI_Op functions for (MPI_Op,
MPI_Datatype) tuples still exist, but unlike coll, they're in the
framework base (vs. being in a separate "basic" component) and are
automatically used if no component is found at runtime that provides a
module with the necessary function pointers.
There is an "example" op component that will hopefully be useful to
those writing meaningful op components. It is currently
.ompi_ignore'd so that it doesn't impinge on other developers (it's
somewhat chatty in terms of opal_output() so that you can tell when
its functions have been invoked). See the README file in the example
op component directory. Developers of new op components are
encouraged to look at the following wiki pages:
https://svn.open-mpi.org/trac/ompi/wiki/devel/Autogenhttps://svn.open-mpi.org/trac/ompi/wiki/devel/CreateComponenthttps://svn.open-mpi.org/trac/ompi/wiki/devel/CreateFramework
= MPI_REDUCE_LOCAL =
Part of the MPI-2.2 proposal listed here:
https://svn.mpi-forum.org/trac/mpi-forum-web/ticket/24
is to add a new function named MPI_REDUCE_LOCAL. It is very easy to
implement, so I added it (also because it makes testing the op
framework pretty easy -- you can do it in serial rather than via
parallel reductions). There's even a man page!
This commit was SVN r20280.
* If the accumulate is local, make it short-circuit the request path. Accumulate requires local
ops due to its window rules, so this is likely to help a bunch (on the codes I"m messing
with at least)
* Due a better job at flushing everything that can go out on the wire in a resource constrained problem
* Move some debugging values around to make large problems somewhat easier to deal with
This commit was SVN r20277.
to grow to. Without this change, jobs with np>120 get errors.
This does not change anything for np<16 jobs. It only comes into
play with larger np count on a node. I imagine that this can be
scaled back in the future if the usage of memory in the sm
btl is improved.
This fixes trac:1449.
This commit was SVN r20230.
The following Trac tickets were found above:
Ticket 1449 --> https://svn.open-mpi.org/trac/ompi/ticket/1449
* Don't overwrite the des_flags field, removing the
all important always callback field
* Fix up return status of bml_base_send, since
the rest of the code expects OMPI_SUCCESS or
an error code
This commit was SVN r20178.
components to use. This code was rendered obsolete (albiet harmless)
by the MCA base improvements that only open the components that were
specified by each framework's MCA parameter.
This commit was SVN r20176.
The problem was that we doubly decremented the active count on blocking receives that we stall to complete. This moved the active count into the negative. With a negative count for 'active' a message that should have been accounted for would be over looked. This then causes the bookmark exchange to post a drain for a message that was never posted, thus locking the protocol. By eliminating the decrement on the 'active' count when we attempt to post the drain message, we only the decrement this counter when the outstanding blocking recv completes during the stall operation.
Refs trac:1619
Does not close this ticket since there is an outstanding potential problem with ANY_SOURCE and ANY_TAG, as referenced in the ticket.
This should be moved to v1.3
This commit was SVN r20147.
The following Trac tickets were found above:
Ticket 1619 --> https://svn.open-mpi.org/trac/ompi/ticket/1619
