than can be used (e.g., number of on-node peers), that no additional
room is set aside for those FIFOs that will never be created. This
makes it easier to have dedicated FIFOs: just set btl_sm_num_fifos
to be very large rather than setting it to be the local number of
procs. In practice, we ask for extra headroom anyhow, so this change
generally won't matter.
This commit was SVN r22291.
area, we cap the size at LONG_MAX. But we are figuring out how much
we need. So, if that amount exceeds LONG_MAX, we should return an
"out of resource" error code.
This commit was SVN r22172.
This commit does a bunch of things:
* Address all remaining code review items from CMR #2023:
* Defer mmap setup to be lazy; only set it up the first time we
invoke a collective. In this way, we don't penalize apps that
make lots of communicators but don't invoke collectives on them
(per #2027).
* Remove the extra assignments of mca_coll_sm_one (fixing a
convertor count setup that was the real problem).
* Remove another extra/unnecessary assignment.
* Increase libevent polling frequency when using the RML to
bootstrap mmap'ed memory.
* Fix a minor procs-related memory leak in btl_sm.
* Commit a datatype fix that George and I discovered along the way to
fixing the coll sm.
* Improve error messages when mmap fails, potentially trying to
de-alloc any allocated memory when that happens.
* Fix a previously-unnoticed confusion between extent and true_extent
in coll sm reduce.
This commit was SVN r22049.
The following Trac tickets were found above:
Ticket 2023 --> https://svn.open-mpi.org/trac/ompi/ticket/2023
Before this, we would restore the topmost old session directory. This commit makes sure that we remove it when we are done with it.
This commit was SVN r21971.
* Various cosmetic/style updates in the btl sm
* Clean up concept of mpool module (I think that code was written way
back when the concept of "modules" was fuzzy)
* Bring over some old fixes from the /tmp/timattox-sm-coll/ tree to
fix potential segv's when mmap'ed regions were at different
addresses in different processes (thanks Tim!).
* Change sm coll to no longer use mpool as its main source of shmem;
rather, just mmap its own segment (because it's fixed size --
there was nothing to be gained by using mpool; shedding the use of
mpool saved a lot of complexity in the sm coll setup). This
effectively made Tim's fixes moot (because now everything is an
offset into the mmap that is computed locally; there are no global
pointers). :-)
* Slightly updated common/sm to allow making mmap's for a specific
set of procs (vs. ''all'' procs in the process). This potentially
allows for same-host-inter-proc mmaps -- yay!
* Fixed many, many things in the coll sm (particularly in reduce):
* Fixed handling of MPI_IN_PLACE in reduce and allreduce
* Fixed handling of non-contiguous datatypes in reduce
* Changed the order of reductions to go from process (n-1)'s data
to process 0's data, because that's how all other OMPI coll
components work
* Fixed lots of usage of ddt functions
* When using a non-contiguous datatype, if the root process is not
(n-1), now we used a 2nd convertor to copy from shmem to the rbuf
(saves a memory copy vs. what was done before)
* Lots and lots of little cleanups, clarifications, and minor
optimizations (although still more could be done -- e.g., I think
the use of write memory barriers is fairly sub-optimal; they
could be ganged together at the root, for example)
I'm marking this as "fixes trac:1988" and closing the ticket; if something
is still broken, we can re-open the ticket.
This commit was SVN r21967.
The following Trac tickets were found above:
Ticket 1988 --> https://svn.open-mpi.org/trac/ompi/ticket/1988
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
BTL/sm. This static variable needlessly ends up in the so.-file.
init_maffinity is called once from sm_btl_first_time_init.
Checked with lennyve, static here is not necessary.
This commit was SVN r21813.
The following SVN revision numbers were found above:
r18658 --> open-mpi/ompi@f4811d6c4d
variables that are not initialized and are declared in a file that
doesn't export any globally visible function are marked as
non-initialized constants, i.e. uninitialized common symbols. For some
obscure reasons, they get removed from the object files on Mac OS X.
So far I found two solution to this problem. One require the addition
of "-c" to the linker command, the second one (corresponding to this
patch) force them to became a common initialized symbol.
This commit was SVN r21739.
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
point, the event engine has been shut down until btl finalization is
done, so opal_progress in the wait loop is not an option - we have
to drain from inside the btl.
Clean up the looping structure for the finalize routine
Update copyrights.
This commit was SVN r21620.
IPv4 and IPv6) is outside the legal boundaries. This fixes trac:1869.
This commit was SVN r21612.
The following Trac tickets were found above:
Ticket 1869 --> https://svn.open-mpi.org/trac/ompi/ticket/1869
btl_sm.c: In function ‘mca_btl_sm_sendi’:
btl_sm.c:734: warning: comparison between signed and unsigned
btl_sm.c: In function ‘mca_btl_sm_send’:
btl_sm.c:812: warning: comparison between signed and unsigned
This commit was SVN r21552.
The following SVN revision numbers were found above:
r21551 --> open-mpi/ompi@bd995d26b4
- poll FIFO occasionally even if just sending messages
- retry pending sends more often
- just before trying a new send
- as part of mca_btl_sm_component_progress
Maintain two new mca_btl_sm_component variables, num_outstanding_frags
and num_pending_sends, to keep overhead low.
Drain only one message fragment from the FIFO per btl_sm_component_progress
call (rather than drain until empty, which in retrospect everyone considers
to have been a mistake).
This commit was SVN r21551.
This commit was SVN r21533.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r21524
(now works on both big and little endian machines)
* Be a little more flexible when looking for active devices in
btl_openib_component.c
* Add device name and port number to lots of verbose and help
messages
* Add a bunch of verbose messages to give insight into what is
occurring during all the CPC wireups
This commit was SVN r21418.
Yes, friends, our favorite PCIE BTL has resurfaced as mgmt vacillates over its existence. This is an updated version that actually mostly works, in its final stages of debugging.
Some generalization still remains to be done...
This commit was SVN r21358.
shm_fifos values are only partially updated, and this leads to wrong values
for the offset. Moving the write barrier at the right place, plus forcing
some read barriers might help.
In addition I get rid of the sm_offset array which is completely useless.
This commit was SVN r21253.
for printing size_t use "%lu" and cast to (unsigned long).
This commit was SVN r21238.
The following SVN revision numbers were found above:
r21234 --> open-mpi/ompi@22b6177fb9
I just found that we have 2 place where we call for XRC domain
creation. First one in init_one_device() and second one prepare_device_for_use().
They have absolutely identical code, but the call in init_one_device() is useless
because on this stage we don't know about QP configuration and we don't know if we need
XRC at all. So I removing the duplicated code from init_one_device().
This commit was SVN r21235.
for us already.
* Slightly clarify the error message strings; now they match the new
error strings for btl_openib_ipaddr_in|exclude
This commit was SVN r21197.
subnet specifications (in addition to interface names). These
parameters now take a comma-delimited list of interfaces names and/or
a.b.c.d/x specifications (only IPv4 currently supported for subnet
specifications). For example:
mpirun --mca btl_tcp_if_include 10.10.30.0/8,eth0
This commit was SVN r21189.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
several header files (previously included by header-files)
now have to be moved "upward".
This is mainly system headers such as string.h, stdio.h and for
networking, but also some orte headers.
This commit was SVN r21095.
and mo'bettah. Put in lengthy comments explaining what's going on.
We might still want to tweak this some more, but we can no longer get
IMB-EXT to hang with this new code anymore (e.g., even without eager
RDMA -- we discovered after the fact that the code in the v1.3.2
release will hang if eager RDMA is disabled).
Fixes trac:1890. Really.
This commit was SVN r21061.
The following Trac tickets were found above:
Ticket 1890 --> https://svn.open-mpi.org/trac/ompi/ticket/1890
_endpoint_post_send(), which could result in an infinite loop (see the
comment in the code).
This is part one of a proper fix; it's suitable for the v1.3 tree and
for an immediate release. Pasha and I plan to spend a little more
time and clean up this stuff properly, but it does not need to be
included in v1.3.2.
This commit was SVN r21047.
The following Trac tickets were found above:
Ticket 1890 --> https://svn.open-mpi.org/trac/ompi/ticket/1890
and https://svn.open-mpi.org/trac/ompi/ticket/1853, mallopt() hints do
not always work -- it is possible for memory to be returned to the OS
and therefore OMPI's registration cache becomes invalid.
This commit removes all use of mallopt() and uses a different way to
integrate ptmalloc2 than we have done in the past. In particular, we
use almost exactly the same technique as MX:
* Remove all uses of mallopt, to include the opal/memory mallopt
component.
* Name-shift all of OMPI's internal ptmalloc2 public symbols (e.g.,
malloc -> opal_memory_ptmalloc2_malloc).
* At run-time, use the existing glibc allocator malloc hook function
pointers to fully hijack the glibc allocator with our own
name-shifted ptmalloc2.
* Make the decision whether to hijack the glibc allocator ''at run
time'' (vs. at link time, as previous ptmalloc2 integration
attempts have done). Look at the OMPI_MCA_mpi_leave_pinned
and OMPI_MCA_mpi_leave_pinned_pipeline environment variables and
the existence of /sys/class/infiniband to determine if we should
install the hooks or not.
* As an added bonus, we can now tell if libopen-pal is linked
statically or dynamically, and if we're linked statically, we
assume that munmap intercept support doesn't work.
See the opal/mca/memory/ptmalloc2/README-open-mpi.txt file for all the
gory details about the implementation.
Fixes trac:1853.
This commit was SVN r20921.
The following Trac tickets were found above:
Ticket 1853 --> https://svn.open-mpi.org/trac/ompi/ticket/1853
after each process create it's FIFOs but before they access the
peer's FIFOs. Second, replace a one way synchronization by a real
barrier, so we know that every process is really where we expect
them to be.
This commit was SVN r20906.
* Ensure we don't try to do opal_list_get_next() on an item we just
deleted
* set myaddrs = NULL when we're done with it, just for good measure
Once this is ported to OMPI v1.3 branch, it fixes
https://bugs.openfabrics.org/show_bug.cgi?id=1579.
This commit was SVN r20896.
