In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.
This commit was SVN r22405.
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
not end up in OPAL
- Will post an updated patch for the OMPI_ALIGNMENT_ parts (within C).
This commit was SVN r21342.
The following SVN revision numbers were found above:
r21330 --> open-mpi/ompi@95596d1814
into the OPAL namespace, eliminating cases like opal/util/arch.c
testing for ompi_fortran_logical_t.
As this is processor- and compiler-related information
(e.g. does the compiler/architecture support REAL*16)
this should have been on the OPAL layer.
- Unifies f77 code using MPI_Flogical instead of opal_fortran_logical_t
- Tested locally (Linux/x86-64) with mpich and intel testsuite
but would like to get this week-ends MTT output
- PLEASE NOTE: configure-internal macro-names and
ompi_cv_ variables have not been changed, so that
external platform (not in contrib/) files still work.
This commit was SVN r21330.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
malloc buffer for ompi_info_get one character larger for the NUL-termination
See comment in ompi/mpi/c/info_get.c or MPI-2.1 p289
This commit was SVN r21154.
to happen
* Properly error out (rather than cause buffer overflow) in case where
the datatype packed description is larger than our control fragments.
This still isn't standards conforming, but at least we know what
happened.
* Expose win_set_name to external libraries (like the osc modules)
* Set default window name to the CID of the communcator it's using
for communication
Refs trac:1905
This commit was SVN r21134.
The following Trac tickets were found above:
Ticket 1905 --> https://svn.open-mpi.org/trac/ompi/ticket/1905
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
- This patch solely _adds_ required headers and is rather localized
The next patch (after RFC) heavily removes headers (based on script)
- ompi/communicator/communicator.h: For sources that use
ompi_mpi_comm_world, don't require them to include "mpi.h"
- ompi/debuggers/ompi_common_dll.c: mca_topo_base_comm_1_0_0_t needs
#include "ompi/mca/topo/topo.h"
- ompi/errhandler/errhandler_predefined.h:
ompi/communicator/communicator.h depends on this header file!
To prevent recursion just have fwd declarations.
#include "ompi/types.h" for fwd declarations of the main structs.
- ompi/mca/btl/btl.h: #include "opal/types.h" for ompi_ptr_t
- ompi/mca/mpool/base/mpool_base_tree.c: We use ompi_free_list_t and
ompi_rb_tree_t, so have the proper classes
- ompi/mca/op/op.h:
Op is pretty self-contained: Nobody up to now has done
#include "opal/class/opal_object.h"
- ompi/mca/osc/pt2pt/osc_pt2pt_replyreq.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/base/base.h:
We use opal_lists
- ompi/mca/pml/dr/pml_dr_vfrag.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/ob1/pml_ob1_hdr.h:
#include "ompi/mca/btl/btl.h" for mca_btl_base_segment_t
- opal/dss/dss_unpack.c:
#include "opal/types.h"
- opal/mca/base/base.h:
#include "opal/util/cmd_line.h" for opal_cmd_line_t
- orte/mca/oob/tcp/oob_tcp.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp.h:
#include "opal/threads/threads.h" for opal_thread_t
- orte/mca/oob/tcp/oob_tcp_msg.c:
#include "opal/types.h"
- orte/mca/oob/tcp/oob_tcp_peer.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp_send.c:
#include "opal/types.h"
- orte/mca/plm/base/plm_base_proxy.c:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
- orte/mca/rml/base/rml_base_receive.c:
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/mca/rml/oob/rml_oob_recv.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/mca/rml/oob/rml_oob_send.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/runtime/orte_data_server.c
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/runtime/orte_globals.h:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
Tested on Linux/x86-64
This commit was SVN r20817.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
Anyway, this is blocking the move: do not include pml.h
if not really needed, aka none of the following used:
mca_pml
MCA_PML_CALL
OMPI_ANY_TAG
OMPI_ANY_SOURCE
OMPI_PROC_NULL
- Notable exceptions (deleting in one header->adding):
- ompi/mca/mtl/psm/
- ompi/mca/osc/rdma/
- ompi/mca/btl/openib/btl_openib_endpoint.c depended on
pml_base_sendreq.h
- Tested on Linux/x86-64, this time including make check
(thanks Jeff and Ralph)
This commit was SVN r20725.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
* If the accumulate is local, make it short-circuit the request path. Accumulate requires local
ops due to its window rules, so this is likely to help a bunch (on the codes I"m messing
with at least)
* Due a better job at flushing everything that can go out on the wire in a resource constrained problem
* Move some debugging values around to make large problems somewhat easier to deal with
This commit was SVN r20277.
* Don't overwrite the des_flags field, removing the
all important always callback field
* Fix up return status of bml_base_send, since
the rest of the code expects OMPI_SUCCESS or
an error code
This commit was SVN r20178.
I'm unable to split it in two parts, my patch and Edgar's one. So I just update
copyright information for both of us.
What this patch do:
- it use the unexpected queue create by commit r19562 to dispatch the
unexpected message to the right communicator (once this communicator
is created and initialized).
- delay the PML comm_add until we have the context_id for the new communicator.
- only do the PML comm_add on processes that really belong to the new
communicator. Please read the lengthy comment in the source code for the
reason behind this.
This commit was SVN r19929.
The following SVN revision numbers were found above:
r19562 --> open-mpi/ompi@acd3406aa7
got a whole lot smaller, decreasing the memory footprint of the
running application. How much it's a good question. Here is a
breakdown:
- in mca_bml_base_endpoint_t: 3 *size_t + 1 * uint32_t
- in mca_bml_base_btl_t: 1 * int + 1 * double - 1 * float
+ 6 * size_t + 9 * (void*)
The decrease in mca_bml_base_endpoint_t is for each peer and the
decrease in mca_bml_base_btl_t is for each BTL for each peer.
So, if we consider the most convenient case where there is only
one network between all peers, this decrease the memory foot print
per peer by
9*size_t + 9*(void*) + 2 * int32_t + 1 * double - 1 * float.
On a 64 bits machine this will be 156 bytes per peer.
Now we access all these fields directly from the underlying BTL
structure, and as this structure is common to multiple BML endpoint,
we are a lot more cache friendly. Even if this do not improve the
latency, it makes the SM performance graph a lot smoother.
This commit was SVN r19659.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
1. The send path get shorter. The BTL is allowed to return > 0 to specify that the
descriptor was pushed to the networks, and that the memory attached to it is
available again for the upper layer. The MCA_BTL_DES_SEND_ALWAYS_CALLBACK flag
can be used by the PML to force the BTL to always trigger the callback.
Unmodified BTL will continue to work as expected, as they will return OMPI_SUCCESS
which force the PML to have exactly the same behavior as before. Some BTLs have
been modified: self, sm, tcp, mx.
2. Add send immediate interface to BTL.
The idea is to have a mechanism of allowing the BTL to take advantage of
send optimizations such as the ability to deliver data "inline". Some
network APIs such as Portals allow data to be sent using a "thin" event
without packing data into a memory descriptor. This interface change
allows the BTL to use such capabilities and allows for other optimizations
in the future. All existing BTLs except for Portals and sm have this interface
set to NULL.
This commit was SVN r18551.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
used at nce (up to one unique collective module per collective function).
Matches r15795:15921 of the tmp/bwb-coll-select branch
This commit was SVN r15924.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15795
r15921
