Similar to #6286 rounding number of bytes into a single precision floating point value to round up the result of a division is a potential risk due to rounding errors.
- remove floating point operations for `round up`
- removes floating point conversion for round down (native behavior of integer division)
Signed-off-by: René Widera <r.widera@hzdr.de>
(cherry picked from commit a91fab80a1)
This commit fixes a problem reported on the mailing list with
individual writes larger than 512 MB.
The culprit is a floating point division of two large, close values.
Changing the datatypes from float to double (which is what is being
used in the fcoll components) fixes the problem.
See issue #6285 and
https://forum.hdfgroup.org/t/cannot-write-more-than-512-mb-in-1d/5118
Thanks for Axel Huebl and René Widera for reporting the issue.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
(cherry picked from commit c0f8ce0fff)
Valgrind warns that *newtype is uninitialized when calling from
Fortran as e.g.
use mpi
integer :: t, err
call MPI_Type_create_f90_integer(5, t, err)
Since newtype is intent(out), this should not happen. There is
no reason to convert the type using PMPI_Type_f2c, only to over-
write it immediately afterwards. The other type_create_* functions
did not convert newtype.
The valgrind warnings:
==28441== Conditional jump or move depends on uninitialised value(s)
==28441== at 0x581B555: PMPI_Type_f2c (in [...]/lib/libmpi.so.0.0.0)
==28441== by 0x4E87AB7: MPI_TYPE_CREATE_F90_INTEGER (in [...]/lib/libmpi_mpifh.so.0.0.0)
==28441== by 0x400BA1: MAIN__ (in [...])
==28441== by 0x400C46: main (in [...])
==28441==
==28441== Conditional jump or move depends on uninitialised value(s)
==28441== at 0x581B563: PMPI_Type_f2c (in [...]/lib/libmpi.so.0.0.0)
==28441== by 0x4E87AB7: MPI_TYPE_CREATE_F90_INTEGER (in [...]/lib/libmpi_mpifh.so.0.0.0)
==28441== by 0x400BA1: MAIN__ (in [..])
==28441== by 0x400C46: main (in [...])
==28441==
==28441== Use of uninitialised value of size 8
==28441== at 0x581B577: PMPI_Type_f2c (in [...]/lib/libmpi.so.0.0.0)
==28441== by 0x4E87AB7: MPI_TYPE_CREATE_F90_INTEGER (in [...]/lib/libmpi_mpifh.so.0.0.0)
==28441== by 0x400BA1: MAIN__ (in [...])
==28441== by 0x400C46: main (in [...])
==28441==
Signed-off-by: Risto Toijala <risto.toijala@gmail.com>
(cherry picked from commit f14a0f4fc9)
Adding the implementations of the functions that were removed
from the MPI standard to the build list, regardless of the
state of the OMPI_ENABLE_MPI1_COMPAT.
According to the README, we want the OMPI_ENABLE_MPI1_COMPAT
configure flag to control which MPI prototypes are exposed in
mpi.h, NOT, which are built into the mpi library. Those will
remain in the mpi library until a future major release (5.0?)
NOTE: for the Fortran implementations, we instead define
OMPI_OMIT_MPI1_COMPAT_DECLS to 0 instead of
OMPI_ENABLE_MPI1_COMPAT to 1. I'm not sure why, but
this seems to work correctly.
Also changing the removed MPI_Errhandler_create implementation
to use the non removed MPI_Comm_errhandler_function prototype
(prototype remains unchanged from MPI_Comm_errhandler_fn)
NOTE: This commit is *NOT* a cherry-pick from master, because
on master, we are no longer building those symbols by
default, but on v4.0.x we _ARE_ still building these
symbols by default. This is because the v4.0.x branch
is to remain backwards compatible with v3.0.x, while at
the same time removing the "removed" symbols from mpi.h
(unless the user configures with --enable-mpi1-compatibility)
Signed-off-by: Geoffrey Paulsen <gpaulsen@us.ibm.com>
This commit fixes edge cases of `r = 38` and `r = 308`.
As defined in the MPI standard, `TYPE_CREATE_F90_REAL` and
`TYPE_CREATE_F90_COMPLEX` must be consistent with the Fortran
`SELECTED_REAL_KIND` function. The `SELECTED_REAL_KIND` function is
defined based on the `RANGE` function. The `RANGE` function returns
`INT(MIN(LOG10(HUGE(X)), -LOG10(TINY(X))))` for a real value `X`.
The old code considers only `INT(LOG10(HUGE(X)))` using `*_MAX_10_EXP`.
This commit adds `INT(-LOG10(TINY(X)))` part using `*_MIN_10_EXP`.
This bug affected the following `p`-`r` combinations.
| p | r | expected | returned | expected | returned |
| :------------ | --: | :-------- | :-------- | :------- | :-------- |
| MPI_UNDEFINED | 38 | REAL8 | REAL4 | COMPLEX16 | COMPLEX8 |
| 0 <= p <= 6 | 38 | REAL8 | REAL4 | COMPLEX16 | COMPLEX8 |
| MPI_UNDEFINED | 308 | REAL16 | REAL8 | COMPLEX32 | COMPLEX16 |
| 0 <= p <= 15 | 308 | REAL16 | REAL8 | COMPLEX32 | COMPLEX16 |
MPICH returns the same result as Open MPI with this fix.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
(cherry picked from commit 6fb01f64fe)
Per discussion on https://github.com/open-mpi/ompi/pull/6030
and https://github.com/open-mpi/ompi/pull/6145, move
around where MPI extension header files are installed (specifically:
the installation tree path does not need to match the source tree
path).
For reference, header files were installed like this :
- <prefix>/include/openmpi/ompi/mpiext/pcollreq/mpif-h/mpiext_pcollreq_mpifh.h
- <prefix>/include/openmpi/ompi/mpiext/pcollreq/c/mpiext_pcollreq_c.h
and they are now installed like this :
- <prefix>/include/openmpi/mpiext/mpiext_pcollreq_mpifh.h
- <prefix>/include/openmpi/mpiext/mpiext_pcollreq_c.h
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@975e3cd0c9)
The intention of lowering the priority when all processes are local
was to favor Vader BTL. However, in builds including the OFI MTL it
gets selected instead.
Reviewed-by: Spruit, Neil R <neil.r.spruit@intel.com>
Reviewed-by: Gopalakrishnan, Aravind <aravind.gopalakrishnan@intel.com>
Signed-off-by: Matias Cabral <matias.a.cabral@intel.com>
(cherry picked from commit fc8582c560)
without this fix, an error handler invoked on pml_ucx request would
segfault while trying to dereference requests[i]->req_mpi_object.comm
(picked from master f36eeef)
Signed-off-by: Yossi Itigin <yosefe@mellanox.com>
The feature of persistent collectives is approved in the Sept. 2018
MPI Forum meeting and 2018 Draft Specification of the MPI standard is
published during SC18.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
(cherry picked from commit 5f0fcf0f45)
ompi/mpiext/cuda/c/mpiext_cuda_c.h is automatically generated from
ompi/mpiext/cuda/c/mpiext_cuda_c.h.in at configure time.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit open-mpi/ompi@f8318f0a8f)
(cherry picked from commit open-mpi/ompi@b3ce25af95)
Several names are now no longer returned by MPI_Type_get_envelope.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 65eb118e08)
Commit 89da9651b inadvertantly #if'ed out both deprecated *and*
removed items from mpi.h. The intent was only to #if out items that
have been *removed* from the MPI specification and leave all items
that are merely deprecated.
This commit also re-orders the deleted typedef+functions to be in the
same order as they are listed in MPI-3.1 chapter 17, just to make
verifying/checking the code easier.
Note that --enable-mpi1-compatibility can still be used to restore
prototypes for the items that have been removed from the MPI
specification (e.g., MPI_Address()).
Signed-off-by: Geoffrey Paulsen <gpaulsen@us.ibm.com>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit b03a39d359)
PR #5450 addresses MPI_IN_PLACE processing for basic collective algorithms.
But in conjunction with that, we need to check for MPI_IN_PLACE in tuned paths
as well before calling ompi_datatype_type_size() as otherwise we segfault.
MPI spec also stipulates to ignore sendcount and sendtype for Alltoall and
Allgatherv operations. So, extending the check to these algorithms as well.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
(cherry picked from commit 88d781056f)
check for providing a data representation that is actually supported
by ompio.
Add also one check for a non-NULL pointer in mpi/c/file_set_view
for the data representation.
Also fixes parts of issue #5643
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
this ensures that all processes are done modifying a file
before syncing. Fixes an error in the testmpio testsuite.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
return MPI_ERR_ARG if the size of the fileview is not a
multiple of the size of the etype provided.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
return MPI_ERR_ACCESS if the user tries to read from a file
that was opened using MPI_MODE_WRONLY
return MPI_ERR_READ_ONLY if the user tries to write a file
that was opened using MPI_MODE_RDONLY
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
