Place the content of common_ucx_int.h back to the common_ucx.h and
include common_ucx_wpool.h explicitly.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
Updated the OFI MTL's Recv cancel to be a non-blocking call to match
the MPI spec. Given fi_cancel succeeded, then it is expected that the
user will wait on the request to read the result of if the cancel has
completed.
Signed-off-by: Spruit, Neil R <neil.r.spruit@intel.com
For remote node peers pack smaller worker address, which contains
network device addresses only. This would reduce amount of OOB traffic
during startup.
Signed-off-by: Mikhail Brinskii <mikhailb@mellanox.com>
We've been fighting the battle of trying to create a regex generator and
parser that can handle arbitrary hostname schemes - without long-term
success. The worst of it is that there is no way of checking to see if
the computed regex is correct short of parsing it and doing a
character-by-character comparison with the original string. Ugh...there
has to be a better solution.
One option is to investigate using 3rd-party regex libraries as
those are coming from communities whose sole focus is resolving that
problem. However, someone would need to spend the time to investigate
it, and we'd have to find a license-friendly implementation.
Another option is to quit beating our heads against the wall and just
compress the information. It won't be as much of a reduction, but we
also won't keep hitting scenarios where things break. In this case, it
seems that "perfection" is definitely the enemy of "good enough".
This PR implements the compression option while retaining the
possibility of people adding regex-generating components. The
compression code used in ORTE is consolidated into the opal/compress
framework. That framework currently held bzip and gzip components for
use in compressing checkpoint files - since we no longer support C/R, I
have .opal_ignore'd those components.
However, I have left the original framework APIs alone in case someone
ever decides to redo C/R. The APIs of interest here are added to the
framework - specifically, the "compress_block" and "decompress_block"
functions. I then moved the ORTE zlib compression code into a new
component in this framework.
Unfortunately, the framework currently is a single-select one - i.e.,
only one active component at a time. Since I .opal_ignore'd the other
two and made the priority of zlib high, this isn't a problem. However,
if someone wants to re-enable bzip/gzip or add another component, they
might need to transition opal/compress to a multi-select framework.
Included changes:
* Consolidate the compression code into the opal/compress framework
* Move the ORTE zlib compression code into a new opal/compress/zlib
component
* Ignore the bzip and gzip components in opal/compress framework
* Add a "compress_base_limit" MCA param to set the threshold above which
we compress data - defaults to 4096 bytes
* Delete stale brucks and rcd components from orte/grpcomm framework
* Delete the orte/regx framework
* Update the launch system to use opal/compress instead of string regex
* Provide a default module if no zlib is available
* Fix some misc multi-node issues
* Properly generate the nidmap in response to a "connection warmup"
message so the remote daemon knows the children it needs to launch.
* Remove stale references to orte_node_regex
* opal_byte_object_t's are not OPAL objects - properly release allocated
memory.
* Set the topology
* Currently only handling homogeneous case
* Update the compress framework files to conform
* Consolidate open/close into one "frame" file. Ensure we open/close the
framework
Signed-off-by: Ralph Castain <rhc@pmix.org>
For the non thread-grouping paths, only the first (0th) OFI context
should be used for communication. Otherwise this would access a non existant
array item and cause segfault.
While at it, clarifiy some content regarding SEPs in README (Credit to Matias Cabral
for README edits).
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
Update the OPAL_CHECK_OFI configury macro:
- Make it safe to call the macro multiple times:
- The checks only execute the first time it is invoked
- Subsequent invocations, it just emits a friendly "checking..."
message so that configure output is sensible/logical
- With the goal of ultimately removing opal/mca/common/ofi, rename the
output variables from OPAL_CHECK_OFI to be
opal_ofi_{happy|CPPFLAGS|LDFLAGS|LIBS}.
- Update btl/ofi, btl/usnic, and mtl/ofi for these new conventions.
- Also, don't use AC_REQUIRE to invoke OPAL_CHECK_OFI because that
causes the macro to be invoked at a fairly random time, which makes
configure stdout confusing / hard to grok.
- Remove a little left-over kruft in OPAL_CHECK_OFI, too (which
resulted in an indenting change, making the change to
opal_check_ofi.m4 look larger than it really is).
Thanks Alastair McKinstry for the report and initial fix.
Thanks Rashika Kheria for the reminder.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
`MPIX_C_FLOAT16` is defined as a synonym for `MPIX_SHORT_FLOAT`
if the C compiler supports `_Float16`, which is defined in
ISO/IEC JTC 1/SC 22/WG 14 N1945 (ISO/IEC TS 18661-3:2015).
This name and meaning are same as that of MPICH. This may be
a transitional datatype until the MPI Forum decides a proper
name for the type.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
This extension provides additional MPI datatypes `MPIX_SHORT_FLOAT`,
`MPIX_C_SHORT_FLOAT_COMPLEX`, and `MPIX_CXX_SHORT_FLOAT_COMPLEX`
for `short float` (C/C++), `short float _Complex` (C), and
`std::complex<short float>` (C++), respectively, or their alternate
types like `_Float16`.
See `ompi/mpiext/shortfloat/README.txt` for details.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
... and add `MPI_COMPLEX4`.
This commit changes values of existing `OMPI_DATATYPE_MPI_*` macros.
This change does not affect ABI compatibility of `libmpi.so` and the
like because these values are only used in OMPI internal code.
On the other hand, `ompi_datatype_t::id` values of existing datatypes
are not changed and 73 is newly assigned to for `MPI_COMPLEX4` to
retain ABI compatibility.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
... and `ompi_mpi_c_short_float_complex` and `ompi_mpi_cxx_sfltcplex`.
These are Open MPI internal variables intended to be defined as
`MPI_SHORT_FLOAT`, `MPI_C_SHORT_FLOAT_COMPLEX`, and
`MPI_CXX_SHORT_FLOAT_COMPLEX` in the future.
`OMPI_DATATYPE_MPI_C_SHORT_FLOAT_COMPLEX` is also required to
support `MPI_COMPLEX4` in the next commit.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
The type `short float`, which is proposed in ISO/IEC JTC 1/SC 22 WG 14
(C WG), is not supported by most compilers yet. But some compilers
(including gcc 7 for AArch64 and clang 6) support `_Float16`, which
is defined in ISO/IEC TS 18661-3:2015 (ISO/IEC JTC 1/SC 22/WG 14 N1945)
as an extensions for C. If it is detected in `configure`, it is used
as an alternate type of `short float` in Open MPI internal code.
This commit adds a `configure` option `--enable-alt-short-float=TYPE`.
It can be used to specify a type other than `short float` and `_Float16`
as the alternate type.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
The type `short float` is proposed for the C language in ISO/IEC JTC
1/SC 22 WG 14 (C WG) for mainly IEEE 754-2008 binary16, a.k.a.
half-precision floating point or FP16.
By this commit, `short float` and `short float _Complex` are detected
in `configure` and used in Open MPI internal code. `MPI_SHORT_FLOAT`
and its complex number version are not added yet.
This commit changes values of existing `OPAL_DATATYPE_*` macros.
This change does not affect ABI compatibility of `libmpi.so` and the
like because these values are only used in OPAL and OMPI internal code.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
When compiling mpi.h with a modern C++ compiler and a high degree of
pickyness (e.g., -Wold-style-cast), casting using (void*) in the
OMPI_PREDEFINED_GLOBAL and MPI_STATUS*_IGNORE macros will emit
warnings. So if we're compiling with a C++ compiler, use C++'s
static_cast<> instead of (void*).
Thanks to @shadow-fax for identifying the issue.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
treematch/km_partitioning.c #include "config.h",
but there is no such file when the embedded treematch is used.
In order to prevent the embedded treematch from incorrectly using
the config.h from the embedded hwloc, generate a dummy config.h.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
When we exceed the threshold number of contexts created, print appropriate help
text
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
We missed an assert to check if ALLOW_OVERTAKE is set or not before
validating the sequence number and this will cause deadlock.
Signed-off-by: Thananon Patinyasakdikul <tpatinya@utk.edu>
ACCUMULATE, unlike REDUCE, can use with derived
datatypes with predefinied operations, with some
restrictions outlined in MPI-3:11.3.4. The derived
datatype must be composed entierly from one predefined
datatype (so you can do all the construction you want,
but at the bottom, you can only use one datatype, say,
MPI_INT).
Refs. open-mpi/ompi#6275
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Provide the av_attr.count hint (number of addresses that will be
inserted into the address vector through the life of the process)
at initialization of the address vector. It's ok to be a bit
wrong, but some endpoints (RxR) can benefit by not going through
the slow growth realloc churn.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
This commit fixes a problem reported on the mailing list with
individual writes larger than 512 MB.
The culprit is a floating point division of two large, close values.
Changing the datatypes from float to double (which is what is being
used in the fcoll components) fixes the problem.
See issue #6285 and
https://forum.hdfgroup.org/t/cannot-write-more-than-512-mb-in-1d/5118
Thanks for Axel Huebl and René Widera for reporting the issue.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
With MTLs, there's no "other transport" when the remote side
does not have an active NIC, so we should print a useful error
message when the modex failed (indicating lack of a NIC on
the remote side).
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Similar to #6286 rounding number of bytes into a single precision floating point value to round up the result of a division is a potential risk due to rounding errors.
- remove floating point operations for `round up`
- removes floating point conversion for round down (native behavior of integer division)
Signed-off-by: René Widera <r.widera@hzdr.de>
If MPI extensions are enabled, all
`ompi/mpiext/pcollreq/use-mpi/mpiext_*_usempi.h` are included in
`ompi/mpi/fortran/mpiext-use-mpi/mpi-ext-module.F90` and all
`ompi/mpiext/pcollreq/use-mpi/mpiext_*_usempif08.h` are included in
`ompi/mpi/fortran/mpiext-use-mpi-f08/mpi-f08-ext-module.F90` using
`#include` directives.
In `mpiext_*_usempi.h` and `mpiext_*_usempif08.h`, some MPI extension
may want to use constants or handles defined in the `mpi` module and
the `mpi_f08` module. For example, if you want to define a new
datatype in `mpi_f08_ext`, you'll need the definition of
`type(mpi_datatype)`. However, putting `use mpi_f08` line in thier
`mpiext_*_usempif08.h` may cause a compilation error if more than
one MPI extensions are enabled because the `use` statement must be
put prior to any variable declarations.
To resolve this problem, this commit puts `use mpi` and `use mpi_f08`
as first lines of `mpi-ext-module.F90` and `mpi-f08-ext-module.F90`
respectively.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
Including `mpiext_*_mpifh.h` in the source file of the `mpi_f08_ext`
module is not always appropriate. For example, if you want to define
a new datatype in an MPI extension, the `include 'mpif-ext.h'` binding
defines the datatype as `integer` but the `use mpi_f08_ext` binding
defines it as `type(mpi_datatype)`. They conflict.
This commit allows each MPI extension to declare whether it wants to
include its `mpiext_*_mpifh.h` in `mpi_f08` and `mpi_f08_ext`
respectively. The default (no declaration) is 'want'.
See `ompi/mpiext/example/configure.m4` for an example.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
Moving to a model where we have users actively _enable_ SEP feature for use
rather than opening SEP by default if provider supports it. This allows us to
not regress (either functionally or for performance reasons) any apps that were
working correctly on regular endpoints.
Also, providing MCA to specify number of OFI contexts to create and default
this value to 1 (Given btl/ofi also creates one by default, this reduces the
incidence of a scenario where we allocate all available contexts by default and
if btl/ofi asks for one more, then provider breaks as it doesn't support it).
While at it, spruce up README on SEP content.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
Valgrind warns that *newtype is uninitialized when calling from
Fortran as e.g.
use mpi
integer :: t, err
call MPI_Type_create_f90_integer(5, t, err)
Since newtype is intent(out), this should not happen. There is
no reason to convert the type using PMPI_Type_f2c, only to over-
write it immediately afterwards. The other type_create_* functions
did not convert newtype.
The valgrind warnings:
==28441== Conditional jump or move depends on uninitialised value(s)
==28441== at 0x581B555: PMPI_Type_f2c (in [...]/lib/libmpi.so.0.0.0)
==28441== by 0x4E87AB7: MPI_TYPE_CREATE_F90_INTEGER (in [...]/lib/libmpi_mpifh.so.0.0.0)
==28441== by 0x400BA1: MAIN__ (in [...])
==28441== by 0x400C46: main (in [...])
==28441==
==28441== Conditional jump or move depends on uninitialised value(s)
==28441== at 0x581B563: PMPI_Type_f2c (in [...]/lib/libmpi.so.0.0.0)
==28441== by 0x4E87AB7: MPI_TYPE_CREATE_F90_INTEGER (in [...]/lib/libmpi_mpifh.so.0.0.0)
==28441== by 0x400BA1: MAIN__ (in [..])
==28441== by 0x400C46: main (in [...])
==28441==
==28441== Use of uninitialised value of size 8
==28441== at 0x581B577: PMPI_Type_f2c (in [...]/lib/libmpi.so.0.0.0)
==28441== by 0x4E87AB7: MPI_TYPE_CREATE_F90_INTEGER (in [...]/lib/libmpi_mpifh.so.0.0.0)
==28441== by 0x400BA1: MAIN__ (in [...])
==28441== by 0x400C46: main (in [...])
==28441==
Signed-off-by: Risto Toijala <risto.toijala@gmail.com>
