of the primitive datatype
In this case we can not use the convertor to run the accumulate operation
since the datatype is a more or less a primitive type.
cmr=v1.8:ticket=trac:4449
This commit was SVN r31222.
The following Trac tickets were found above:
Ticket 4449 --> https://svn.open-mpi.org/trac/ompi/ticket/4449
This commit fixes two issues:
- osc/rdma: The target side of an accumulate was using the target datatype
in the receive to the packed buffer. This was conflicting with the way
the reduction is done into the target buffer. Changed the receive to use
the primitive datatype.
- osc/base: The copy table was completely wrong. Fixed the table to match
the underlying datatypes (which are opal not ompi datatypes).
- osc/base: There is a problem using the optimized description. Fall back
on using the non-optimized description until we can understand what is
going wrong.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31204.
results
The code to handle completion messages did not correctly increment the
number of expected messages. This could cause wait to return before all
incoming messages are complete.
I also added a check to ensure that start returns an error if we are in
a passive access epoch.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31203.
ROMIO code assumes all processes will use the same ROMIO driver. we
were not reaching the "find a common file system" logic when NFS was
enabled, everyone stat-ed the file system without errors, but some
processees found a different file system (like if some processes are
writing to NFS and others to UFS)
See discussion beginning here:
http://lists.mpich.org/pipermail/discuss/2014-March/002403.html
Tested-by: Jeff Squyres <jsquyres@cisco.com>
Submitted by Rob Lathan, reviewed by Jeff Squyres
cmr=v1.8:reviewer=ompi-rm1.8
This commit was SVN r31201.
the ompi_common_verbs_find_ports function had a call to
ompi_ibv_get_device_list, but not to ompi_ibv_free_device_list.
fixed by Alina, reviewed by Vasily/Mike.
cmr=v1.8:reviewer=ompi-rm1.8
This commit was SVN r31200.
This commit adds large datatype description support to the osc/rdma
component. Support is provided by an additional send/recv of the datatype
description if the description does not fit in an eager buffer. The
code is designed to require minimal new code and not for speed. We
consider this code path to be a slow path.
Refs trac:1905
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31197.
The following Trac tickets were found above:
Ticket 1905 --> https://svn.open-mpi.org/trac/ompi/ticket/1905
When we are only using local ranks basesmuma needs to provide an allreduce
function for both large and small message or else the coll/ml selection
logic will fail. In the future this logic should probably be updated to
just disable allreduce in coll/ml instead of disabling coll/ml. For now
it should be correct to say the basesmuma allgather works for larger
messages.
cmr=v1.8:reviewer=manjugv
This commit was SVN r31190.
a hierarchy actually matches a bcol that is in use.
There was a bug in one of the paths to calculate the ml buffer size. I fixed
the bug and squashed all the paths together to avoid further issues (the
result was correct in another path that calculated the same value).
Additionally, the i_hier was being used as the bcol_index. This is not
correct in a couple of cases so I added a variable to keep track of the
real bcol_index.
cmr=v1.8:reviewer=pasha
This commit was SVN r31189.
bound.
This case is correctly handled by coll/ml so remove the check that diables
coll/ml in the not bound case.
cmr=v1.8:reviewer=manjugv
This commit was SVN r31188.
This patch fixes two leaks:
- Fix typo in fallback collective code that caused coll/ml to retain
the ibcast module twice but only release it once. One of those ibcast
saves was supposed to be bcast.
- Do not check for module initialization in the module destructor. It
is possible to destruct a module that is partially setup.
cmr=v1.8:reviewer=manjugv
This commit was SVN r31187.
Without this, an attribute copy function could return non-success, but
it would not be propagated upwards. This caused the intel
MPI_Keyval3_* tests to fail.
cmr=v1.8:reviewer=hjelmn
This commit was SVN r31147.
When you call MPI_Graph_create with a old_comm of size N, and pass
nnodes=(N=1), then the Nth proc is supposed to get MPI_COMM_NULL out.
The code in this base function didn't properly handle the proc(s) that
are supposed to get MPI_COMM_NULL out.
cmr=v1.7.5:reviewer=hjelmn
This commit was SVN r31145.
This isn't causing any errors that I know about but it does fix an
annoying valgrind warning. Simple fix, no review required.
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r31130.
There are situations where coll/ml does not initialize properly. These will
eventually need to be fixed but in the meantime it is better to not always
print an error message because the collective framework can still fall back
on another collective module. This commit reduces the verbose output.
cmr=v1.7.5:reviewer=manjugv
This commit was SVN r31129.
It is usually not a good idea to assert when something is not implemented
or something goes wrong. Replace asserts with debug output and return.
cmr=v1.7.5:reviewer=manjugv
This commit was SVN r31128.
The necessary information is stored in the proc object. There is no need
to allgather the local process data to determine if another rank is on
the same socket.
cmr=v1.7.5:reviewer=manjugv
This commit was SVN r31127.
After discussion with Manju we decided to update these the process count
limits of the shared memory collectives to an arbitrarily large number.
cmr=v1.7.5:ticket=trac:4405
This commit was SVN r31126.
The following SVN revision numbers were found above:
r31096 --> open-mpi/ompi@3f469d08e7
The following Trac tickets were found above:
Ticket 4405 --> https://svn.open-mpi.org/trac/ompi/ticket/4405
* Ensure that all endpoints[x] values are initialized to NULL
* If ibv_create_ah fails, remove each endpoint from the
module->all_endpoints list so that the endpoint can be destructed
properly.
Submitted by Jeff Squyres, reviewed by Dave Goodell.
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r31111.
This provides full locality - i.e., not just node-level, but all the way down to whatever common binding level exists between the procs.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31106.
Also fixed spelling: IS_NOT_RECHABLE -> IS_NOT_REACHABLE.
Also mark a few places where opal_show_help() should have been used;
Manju will take care of these.
This commit was SVN r31104.
In r31071 I modified the logic to not increment the hierarchy level if
no processes were selected by that sbgp. That fixed a problem seen on
systems where we don't support process binding. The problem is there
is a case where we actually did select processes yet the number of
selected processes is 0. We need to increment the hierarchy in this case
as well.
This should fix the segmentation fault found by recent MTT runs. Once
this is committed to 1.7.5 remove the .ompi_ignore's from coll/ml and
bcol/ptpcoll. Tested with ompi-tests/ibm.
cmr=v1.7.5:reviewer=rhc
This commit was SVN r31081.
The following SVN revision numbers were found above:
r31071 --> open-mpi/ompi@1911d97044
This was causing JVMs to run out of stack space, and all manner of
badness ensued.
Instead, use the heap -- that's what it's there for.
cmr=v1.7.5:reviewer=rhc:subject=make coll/ml use the heap for large debug array
This commit was SVN r31073.
fails to select any processes on any nodes.
Also modified basesmsocket to only print debugging info to the framework
output.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31071.
These parameters should not be marked as INTENT(OUT) (they aren't in
the MPI-3 standard).
This commit was SVN r31056.
The following Trac tickets were found above:
Ticket 4372 --> https://svn.open-mpi.org/trac/ompi/ticket/4372
* Several parameters should not be marked as INTENT(OUT) (they aren't in
the MPI-3 standard).
* Added missing PMPI F08 OMPI interfaces
This commit was SVN r31049.
The following Trac tickets were found above:
Ticket 4372 --> https://svn.open-mpi.org/trac/ompi/ticket/4372
These parameters should not be marked as INTENT(OUT) (they aren't in
the MPI-3 standard).
This commit was SVN r31048.
The following Trac tickets were found above:
Ticket 4372 --> https://svn.open-mpi.org/trac/ompi/ticket/4372
