Previously we used a fairly simple algorithm in
mca_btl_tcp_proc_insert() to pair local and remote modules. This was a
point in time solution rather than a global optimization problem (where
global means all modules between two peers). The selection logic would
often fail due to pairing interfaces that are not routable for traffic.
The complexity of the selection logic was Θ(n^n), which was expensive.
Due to poor scalability, this logic was only used when the number of
interfaces was less than MAX_PERMUTATION_INTERFACES (default 8). More
details can be found in this ticket:
https://svn.open-mpi.org/trac/ompi/ticket/2031 (The complexity estimates
in the ticket do not match what I calculated from the function)
As a fallback, when interfaces surpassed this threshold, a brute force
O(n^2) double for loop was used to match interfaces.
This commit solves two problems. First, the point-in-time solution is
turned into a global optimization solution. Second, the reachability
framework was used to create a more realistic reachability map. We
switched from using IP/netmask to using the reachability framework,
which supports route lookup. This will help many corner cases as well as
utilize any future development of the reachability framework.
The solution implemented in this commit has a complexity mainly derived
from the bipartite assignment solver. If the local and remote peer both
have the same number of interfaces (n), the complexity of matching will
be O(n^5).
With the decrease in complexity to O(n^5), I calculated and tested
that initialization costs would be 5000 microseconds with 30 interfaces
per node (Likely close to the maximum realistic number of interfaces we
will encounter). For additional datapoints, data up to 300 (a very
unrealistic number) of interfaces was simulated. Up until 150
interfaces, the matching costs will be less than 1 second, climbing to
10 seconds with 300 interfaces. Reflecting on these results, I removed
the suboptimal O(n^2) fallback logic, as it no longer seems necessary.
Data was gathered comparing the scaling of initialization costs with
ranks. For low number of interfaces, the impact of initialization is
negligible. At an interface count of 7-8, the new code has slightly
faster initialization costs. At an interface count of 15, the new code
has slower initialization costs. However, all initialization costs
scale linearly with the number of ranks.
In order to use the reachable function, we populate local and remote
lists of interfaces. We then convert the interface matching problem
into a graph problem. We create a bipartite graph with the local and
remote interfaces as vertices and use negative reachability weights as
costs. Using the bipartite assignment solver, we generate the matches
for the graph. To ensure that both the local and remote process have
the same output, we ensure we mirror their respective inputs for the
graphs. Finally, we store the endpoint matches that we created earlier
in a hash table. This is stored with the btl_index as the key and a
struct mca_btl_tcp_addr_t* as the value. This is then retrieved during
insertion time to set the endpoint address.
Signed-off-by: William Zhang <wilzhang@amazon.com>
Advance to hwloc-2.1.0rc2-33-g38433c0f, which includes a .gitignore
update that we want here in Open MPI.
Be warned; this is actually 33 commits beyond the hwloc v2.1.0 tag.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This PR removes the constant defining the max attachment address and
replaces it with the largest address that shows up in /proc/self/maps.
This should address issues found on AARCH64 where the max address
may differ based on the configuration.
Since the calculated max address may differ between processes the
max address is sent as part of the modex and stored in the endpoint
data.
Signed-off-by: Nathan Hjelm <hjelmn@google.com>
The opal_gethostname() function provides a more robust mechanism
to retrieve the hostname than gethostname(), which can return
results that are not null-terminated, and which can vary in its
behavior from system to system.
opal_gethostname() just returns the value in opal_process_info.nodename;
this is populated in opal_init_gethostname() inside opal_init.c.
-Changed all gethostname calls in opal subtree to opal_gethostname
-Changed all gethostname calls in orte subtree to opal_gethostname
-Changed all gethostname calls in ompi subdir to opal_gethostname
-Changed all gethostname calls in oshmem subdir to opal_gethostname
-Changed opal_if.c in test subdir to use opal_gethostname
-Changed opal_init.c to include opal_init_gethostname. This function
returns an int and directly sets opal_process_info.nodename per
jsquyres' modifications.
Relates to open-mpi#6801
Signed-off-by: Charles Shereda <cpshereda@lanl.gov>
Make sure to get an RDM provider that can provide both local and
remote communication. We need this check because some providers could
be selected via RXD or RXM, but can't provide local communication, for
example.
Add OPAL_CHECK_OFI_VERSION_GE() m4 macro to check that the Libfabric
we're building against is >= a target version. Use this check in two
places:
1. MTL/OFI: Make sure it is >= v1.5, because the FI_LOCAL_COMM /
FI_REMOTE_COMM constants were introduced in Libfabric API v1.5.
2. BTL/usnic: It already had similar configury to check for Libfabric
>= v1.1, but the usnic component was checking for >= v1.3. So
update the btl/usnic configury to use the new macro and check for
>= v1.3.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit fixes an issue discovered in the XPMEM registration cache. It
was possible for a registration to be invalidated by multiple threads
leading to a double-free situation or re-use of an invalidated registration.
This commit fixes the issue by setting the INVALID flag on a registation
when it will be deleted. The flag is set while iterating over the tree
to take advantage of the fact that a registration can not be removed
from the VMA tree by a thread while another thread is traversing the VMA
tree.
References #6524
References #7030Closes#6534
Signed-off-by: Nathan Hjelm <hjelmn@google.com>
Rename the component to be "hwloc2" (since it can now be any v2.x.y
version of hwloc), and make the embedded copy of hwloc be a git
submodule.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Clarify in README what --with-hwloc does in its different use cases.
Also, ensure that the behavior when specifying `--with-hwloc` is the
same as if that option is not specified at all. This is what we did
in Open MPI <= v3.x; looks like we inadvertantly caused `--with-hwloc`
to be synonymous with `--with-hwloc=external` in v4.0.0.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
We have decided to show interfaces that are identical to itself as
reachable. This is consistent with the previous netmask logic when
determining reachability.
Signed-off-by: William Zhang <wilzhang@amazon.com>
Due to the way netlinks detects reachability, it will not show an
interface as reachable to itself, even if it can pass through a loopback
interface. To maintain similar behavior with netmasks, we display an
interface as reachable to itself.
Signed-off-by: William Zhang <wilzhang@amazon.com>
Both opal_hwloc_base_get_relative_locality() and _get_locality_string()
iterate over hwloc levels to build the proc locality information.
Unfortunately, NUMA nodes are not in those normal levels anymore since 2.0.
We have to explicitly look a the special NUMA level to get that locality info.
I am factorizing the core of the iterations inside dedicated "_by_depth"
functions and calling them again for the NUMA level at the end of the loops.
Thanks to Hatem Elshazly for reporting the NUMA communicator split failure
at https://www.mail-archive.com/users@lists.open-mpi.org/msg33589.html
It looks like only the opal_hwloc_base_get_locality_string() part is needed
to fix that split, but there's no reason not to fix get_relative_locality()
as well.
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
related to #7128
The UCX crew is no longer guaranteeing that the UCT API is going to be frozen,
so this is kind of a whack-a-mole problem trying to keep the BTL UCT working
with various changing UCT APIs.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
This commit fixes a configure bug that caused flow control to be
disabled regardless of the configure options used.
Signed-off-by: Todd Kordenbrock <thkgcode@gmail.com>
Move the prefix area from the head to the body in relevant size
computations. This fixes a problem in high traffic situations where
usNIC may have sent from unregistered memory.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
