This is required to tighten up the BTL semantics. Ordering is not guaranteed,
but, if the BTL returns a order tag in a descriptor (other than
MCA_BTL_NO_ORDER) then we may request another descriptor that will obey
ordering w.r.t. to the other descriptor.
This will allow sane behavior for RDMA networks, where local completion of an
RDMA operation on the active side does not imply remote completion on the
passive side. If we send a FIN message after local completion and the FIN is
not ordered w.r.t. the RDMA operation then badness may occur as the passive
side may now try to deregister the memory and the RDMA operation may still be
pending on the passive side.
Note that this has no impact on networks that don't suffer from this
limitation as the ORDER tag can simply always be specified as
MCA_BTL_NO_ORDER.
This commit was SVN r14768.
We eagerly send data up to btl_*_eager_limit with the match
Upon ACK of the MATCH we start using send/receives of size
btl_*_max_send_size up to the btl_*_rdma_pipeline_offset
After the btl_*_rdma_pipeline_offset we begin using RDMA writes of
size btl_*_rdma_pipeline_frag_size.
Now, on a per message basis we only use the above protocol if the
message is larger than btl_*_min_rdma_pipeline_size
btl_*_eager_limit - > same
btl_*_max_send_size -> same
btl_*_rdma_pipeline_offset -> btl_*_min_rdma_size
btl_*_rdma_pipeline_frag_size -> btl_*_max_rdma_size
btl_*_min_rdma_pipeline_size is new..
This patch also moves all BTL common parameters initialisation into
btl_base_mca.c file.
This commit was SVN r14681.
- Move the PML Modex stuff out of the BML -- Abstraction violation.
- Also fix the location of the add_procs with respect to the stage gates.
This commit was SVN r14422.
Fix for memory corruption in the restarted process stack. This stemed from
the brute force method we were previously using. This commit fixes this by
using a lighter weight solution focused in the r2 BML instead of above the PML.
This is a more efficient and flexible solution, and it solves the original
problem.
In the process I pulled out the ft_event function in the tcp BTL and r2 BML
into a set of *_ft.[c|h] files just to keep any updates to these code paths
as isolated as possible to make merging easier on everyone.
This commit was SVN r14371.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
The following Trac tickets were found above:
Ticket 977 --> https://svn.open-mpi.org/trac/ompi/ticket/977
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
Remove a redundant statement in the r2 BML.
This commit was SVN r14228.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
Back out r14073 - it speeds up TCP latency / bandwidth but at the same time
it kills ROMIO and one-sided performance when using only TCP. The problem
is that it only allows those two to be progressed every couple of seconds,
leading to what looks like hangs in the one-sided tests (and the ROMIO stuff,
although people seem to not notice that at this point).
This commit was SVN r14144.
The following SVN revision numbers were found above:
r14073 --> open-mpi/ompi@64fbbc20b8
r14142 --> open-mpi/ompi@241545a098
it kills ROMIO and one-sided performance when using only TCP. The problem
is that it only allows those two to be progressed every couple of seconds,
leading to what looks like hangs in the one-sided tests (and the ROMIO stuff,
although people seem to not notice that at this point).
This commit was SVN r14142.
The following SVN revision numbers were found above:
r14073 --> open-mpi/ompi@64fbbc20b8
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
- Implement the BML/r2 finialize funciton
- Cleanup the btl close routine
- Wire up a pml_base_verbose MCA parameter so you can actually watch the PML selection logic if you really want to.
- Fix a potental segfault in the selection logic.
ompi_pointer_array_get_item() may return NULL, so we have to check for it
This commit was SVN r13734.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
OB1 always use first element from array of BTLs available for RDMA. The patch
change the array creation algorithm, it puts different BTL in the first element
in round robin fashion.
This commit was SVN r13174.
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
* Make sure that the pval always writes to the correct portion of the
lval. This only matters on 32 bit big endian machines.
* On 32 bit machines when assigning to pval, the other 4 bytes of lval
weren't being written, which could lead to bogus data
We use macros so that there aren't casts all over the code and the pval
assignment can occur to the correct 4 bytes. Refs trac:587
This commit was SVN r12974.
The following Trac tickets were found above:
Ticket 587 --> https://svn.open-mpi.org/trac/ompi/ticket/587
inuse decrement for the increment that was at the start of the procs loop.
Otherwise, the inuse count can end up higher than it actually is and a btl
can end up in the progress loop when it isn't active to any peer.
Refs trac:543
This commit was SVN r12938.
The following Trac tickets were found above:
Ticket 543 --> https://svn.open-mpi.org/trac/ompi/ticket/543
udapl/openib/vapi/gm mpools a deprecated. rdma mpool has parameter that allows
to limit its size mpool_rdma_rcache_size_limit (default is 0 - unlimited).
This commit was SVN r12878.
all platforms. The only exceptions (and I will not deal with them
anytime soon) are on Windows:
- the write functions which require the length to be an int when it's
a size_t on all UNIX variants.
- all iovec manipulation functions where the iov_len is again an int
when it's a size_t on most of the UNIXes.
As these only happens on Windows, so I think we're set for now :)
This commit was SVN r12215.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
In order to provide backwards compatability the framework versions are bumped
and the handler registeration function is at the end of the btl struct.
Testing done on sm, openib, and gm..
This commit was SVN r11256.
the upperlayer assynchronously although there are some issues with this.. such
as there are multiple consumers of the btl's.. who get's the
This commit was SVN r11232.
implemented entirely on top of the PML. This allows us to have a
one-sided interface even when we are using the CM PML and MTLs for
point-to-point transport (and therefore not using the BML/BTLs)
* Old pt2pt component was renamed "rdma", as it will soon be having
real RDMA support added to it.
Work was done in a temporary branch. Commit is the result of the
merge command:
svn merge -r10862:11099 https://svn.open-mpi.org/svn/ompi/tmp/bwb-osc-pt2pt
This commit was SVN r11100.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r10862
r11099
interconnects that provide matching logic in the library.
Currently includes support for MX and some support for
Portals
* Fix overuse of proc_pml pointer on the ompi_proc structuer,
splitting into proc_pml for pml data and proc_bml for
the BML endpoint data
* bug fixes in bsend init code, which wasn't being used by
the OB1 or DR PMLs...
This commit was SVN r10642.
order the BTL depending on the real latency for the eager protocol. Starting from now, the
latency one can specify for the devices will be in micro-second, while the bandwidth is in Mbs
(as it was before).
This commit was SVN r10566.
specified check that the put function is available for the BTL. Same safe check for
the GET function. At the end make sure that at least on communication protocol is
specified, otherwise force the send flag.
This commit was SVN r10507.
add object size to opal class
no longer need the size when allocating a new object as this is stored in
the class structure
--- dr changes
Previous rev. maintained state on the communicator used for acking duplicate
fragments, but the communicator may be destroyed prior to successfull
delivery of an ack to the peer. We must therefore maintain this state
globally on a per peer, not a per peer, per communicator basis.
This requires that we use a global rank on the wire and translate this as
appropriate to a local rank within the communicator.
This commit was SVN r9454.
flag, new flags to be included when convertor is initialized
- modified pml/btl module defs and added stub functions for diagnostic
output routines to dump state of queues / endpoints
- updates to data reliability pml
This commit was SVN r9329.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
the descriptors to vanish. The PML was thinking that they are in the btl_cache when they
weren't ... It lead to memory consumption on most environments when compiled with
thread enabled. After modification the latency went down by nearly 0.5 microseconds.
Simple way to trigger the bug: limit the number of maximum items in the free list and run
any communication intensive application (like Netpipe).
This commit was SVN r8741.
* turns out (duh!) that there was a reason that the <projectdir>dir
variable was set in the AM conditional. If not, stupid directories
are created and not needed... duh.
This commit was SVN r8205.
component/base Makefile.am files, reducing the time configure spends
stamping out Makefiles at the end
* Install base_impl.h file when devel-headers are being installed
This commit was SVN r8200.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
add a -I to find the included ltdl.h (vs. a system-installed ltdl.h)
- Clean up kruft in a bunch of Makefile.am's to remove now-unnecessary
AM_CPPFLAGS settings to get static-components.h for each framework
- Move the component_repository API functions out of opal/mca/base/base.h
and into opal/mca/base/mca_base_component_repository.h in order to
decrease unnecessary dependencies (e.g., before this, almost
everything in the tree depended on ltdl.h, which is unnecessary --
only a small number of files really need ltdl.h)
This commit was SVN r7127.
- Fix compiler warnings
- Fix problem with using "p" instead of "p_index"
- Style updates
- Check return of malloc() for NULL
This commit was SVN r6999.
