about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
used at nce (up to one unique collective module per collective function).
Matches r15795:15921 of the tmp/bwb-coll-select branch
This commit was SVN r15924.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15795
r15921
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
Accordingly, there are new APIs to the name service to support the ability to get a job's parent, root, immediate children, and all its descendants. In addition, the terminate_job, terminate_orted, and signal_job APIs for the PLS have been modified to accept attributes that define the extent of their actions. For example, doing a "terminate_job" with an attribute of ORTE_NS_INCLUDE_DESCENDANTS will terminate the given jobid AND all jobs that descended from it.
I have tested this capability on a MacBook under rsh, Odin under SLURM, and LANL's Flash (bproc). It worked successfully on non-MPI jobs (both simple and including a spawn), and MPI jobs (again, both simple and with a spawn).
This commit was SVN r12597.
allocation logic is completely done outside the data-type engine (in the PML) there is
no need for any special case inside the data-type engine. There is less arguments for
the ompi_convertor_pack and ompi_convertor_unpack as well (the last field free_after is
not required anymore as there is no memory allocated in the engine itself). This change
affect all components using datatypes. I test most of them, but it might happens that I
miss some ... If it's the case please let me know (don't shoot the pianist!!).
This commit was SVN r12331.
size and diplacement of data-type. After this patch all data can contain size_t bytes
and the displacements are defined as ptrdiff_t. All of the files I was able to compile
have been modified to match this requirement.
This commit was SVN r12146.
shared memory segments
* make sure to properly unlink the collectives sm bootstrap area at
shutdown
* Add missing / in the path for the mpool shared memory segment
* make sure to release the common_mmap structure in the SM btl
after unlinking the file during shutdown
This commit was SVN r10886.
flag, new flags to be included when convertor is initialized
- modified pml/btl module defs and added stub functions for diagnostic
output routines to dump state of queues / endpoints
- updates to data reliability pml
This commit was SVN r9329.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
reduce_inorder() function -- we don't use the tree at all.
- Add more relevant "volatile"'s for the control buffers in the
fragment mpool (and associated casts where necessary)
This commit was SVN r7616.
- Move the "process 0" logic out of the main loop in reduce to make
the code a bit less complex (at the price of slight code
duplication, but it iss now significantly easier to read)
- Fix problem with uniquenes guarantee in the bootstrap mpool -- using
the CID alone was not sufficient enough to guarantee uniquenes; now
use (CID, rank 0 process name) tuple to check for uniqueness
- Made a few debugging help changes in coll_sm.h; especially helps
debugging on uniprocessors
This commit was SVN r7599.
lower the default priority to 0 so that it's not active unless you
specifically ask for it (this component needs more testing by people
other than me before we unleash it on the public).
This commit was SVN r7545.
Makefile.options
- Sample in each of the three projects of how to link againt the
relevant libraries so that when components are loaded into a parent
process' space, we don't rely on the libopal/liborte/libmpi symbols
being in the parent's public symbol namespace -- instead,
dynamically link to the relevant libraries, allowing the dynamic
linker to pull those libraries in at run-time, if needed
This commit was SVN r7397.
- remove redundant OBJ_CONSTRUCT in bcast
- fix up some macros in coll_sm.h
- check to ensure that if there are too many processes in the
communicator (i.e., if we couldn't fit a flag for each of them in
the control segment), then fail selection
- setup the in_use flags properly
- adapt to new mpool API
- first working copy of reduce -- not tree-baed (but still
NUMA-aware), and only processes in order from process 0 to process
N-1 -- do not have a tree-based and/or commutative version yet
(i.e., process the results in whatever order they arrive)
Reduce now passes the new ibm reduce_big.c test. Woo hoo! Time to
declare success for the evening (and run the intel test tomorrow).
This commit was SVN r7379.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
- finally added "in use" flags -- one flag protects a set of segments
- these flags now used in bcast to protect (for example) when a
message is so long that the root loops around the segments and has
to re-use old segments -- now it knows that it has to wait until the
non-root processes have finished with that set of segments before it
can start using them
- implement allreduce as a reduce followed by a bcast (per discussion
with rich)
- removed some redundant data on various data structures
- implemented query MCA param ("coll_sm_shared_mem_used_data") that
tells you how much shared memory will be used for a given set of MCA
params (e.g., number of segments, etc.). For example:
ompi_info --mca coll_sm_info_num_procs 4 --param coll sm | \
grep shared_mem_used_data
tells you that for the default MCA param values (as of r7172), for 4
processes, sm will use 548864 bytes of shared memory for its data
transfer section
- remove a bunch of .c files from the Makefile.am that aren't
implemented yet (i.e., all they do is return ERR_NOT_IMPLEMENTED)
Now on to the big Altix to test that this stuff really works...
This commit was SVN r7205.
The following SVN revision numbers were found above:
r7172 --> open-mpi/ompi@bc72a7722b
- bcast now works properly for root!=0 and multi-fragment messages
- destroy mpool when communicator is destroyed
Still need to implement:
- "in use" flags for groups of fragments so that "wrapping around" in
the data segment doesn't overwrite not-yet-read data
- ensure that shared memory isn't removed before all processes have
finished with it (e.g., during COMM_FREE)
This commit was SVN r7172.
much time) and somewhat-lame implementation of barrier (need to
precompute some more stuff rather than calculate it every time).
Checkpointing so I can try this on another machine...
This commit was SVN r6985.
multiple components to share a single mpool module (e.g., the
ptl/btl and coll sm components).
- Re-tool the ptl, btl, and coll sm components to first look for the
target mpool module, and if they don't find it, to create it.
- coll sm component now correctly identifies when it is supposed to
run or not (i.e., if all the processes in the communicator are on
the same host). Now we just need to fill in some algorithms. :-)
This commit was SVN r6530.
- After long discussions and ruminations on how we run components in
LAM/MPI, made the decision that, by default, all components included
in Open MPI will use the version number of their parent project
(i.e., OMPI or ORTE). They are certaint free to use a different
number, but this simplification makes the common cases easy:
- components are only released when the parent project is released
- it is easy (trivial?) to distinguish which version component goes
with with version of the parent project
- removed all autogen/configure code for templating the version .h
file in components
- made all ORTE components use ORTE_*_VERSION for version numbers
- made all OMPI components use OMPI_*_VERSION for version numbers
- removed all VERSION files from components
- configure now displays OPAL, ORTE, and OMPI version numbers
- ditto for ompi_info
- right now, faking it -- OPAL and ORTE and OMPI will always have the
same version number (i.e., they all come from the same top-level
VERSION file). But this paves the way for the Great Configure
Reorganization, where, among other things, each project will have
its own version number.
So all in all, we went from a boatload of version numbers to
[effectively] three. That's pretty good. :-)
This commit was SVN r6344.
