Fix a couple of spots in OMPI to resolve warnings. The one in comm_cid
in particular may be responsible for some/all of the comm_spawn issues
as it was passing an incorrect pointer to a macro, thus causing memory
corruption.
Update PRRTE and PMIx to deal with v3/v4 differences.
Signed-off-by: Ralph Castain <rhc@pmix.org>
Will be replaced by PRRTE. Ensure that OMPI and OPAL layers build
without reference to ORTE. Setup opal/pmix framework to be static.
Remove support for all PMI-1 and PMI-2 libraries. Add support for
"external" pmix component as well as internal v4 one.
remove orte: misc fixes
- UCX fixes
- VPATH issue
- oshmem fixes
- remove useless definition
- Add PRRTE submodule
- Get autogen.pl to traverse PRRTE submodule
- Remove stale orcm reference
- Configure embedded PRRTE
- Correctly pass the prefix to PRRTE
- Correctly set the OMPI_WANT_PRRTE am_conditional
- Move prrte configuration to the end of OMPI's configure.ac
- Make mpirun a symlink to prun, when available
- Fix makedist with --no-orte/--no-prrte option
- Add a `--no-prrte` option which is the same as the legacy
`--no-orte` option.
- Remove embedded PMIx tarball. Replace it with new submodule
pointing to OpenPMIx master repo's master branch
- Some cleanup in PRRTE integration and add config summary entry
- Correctly set the hostname
- Fix locality
- Fix singleton operations
- Fix support for "tune" and "am" options
Signed-off-by: Ralph Castain <rhc@pmix.org>
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
In order for this to work, error management needs to also be added to
NBC, from separate PR
Signed-off-by: Aurelien Bouteiller <bouteill@icl.utk.edu>
The error field of requests needs to be rearmed at start, not at create
Signed-off-by: Aurelien Bouteiller <bouteill@icl.utk.edu>
The Open MPI code base assumed that asprintf always behaved like
the FreeBSD variant, where ptr is set to NULL on error. However,
the C standard (and Linux) only guarantee that the return code will
be -1 on error and leave ptr undefined. Rather than fix all the
usage in the code, we use opal_asprintf() wrapper instead, which
guarantees the BSD-like behavior of ptr always being set to NULL.
In addition to being correct, this will fix many, many warnings
in the Open MPI code base.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Force only procs that are participating in the ne Comm to decide what
CID is appropriate. This will have 2 advantages:
* Speedup Comm creation for small communicators: non-participating procs
will not interfere
* Reduce CID fragmentation: non-overlaping groups will be allowed to use
same CID.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
As we changed the ABI (forcing a major release), we can limit
the size of the predefined communicators by moving the collective
structure outside the communicator. This might have a minimal,
but unnoticeable, impact on performance. This approach has been
discussed during the January 2017 devel meeting.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Multiple conduits can exist at the same time, and can even point to the same base transport. Each conduit can have its own characteristics (e.g., flow control) based on the info keys provided to the "open_conduit" call. For ease during the transition period, the "legacy" RML interfaces remain as wrappers over the new conduit-based APIs using a default conduit opened during orte_init - this default conduit is tied to the OOB framework so that current behaviors are preserved. Once the transition has been completed, a one-time cleanup will be done to update all RML calls to the new APIs and the "legacy" interfaces will be deleted.
While we are at it: Remove oob/usock component to eliminate the TMPDIR length problem - get all working, including oob_stress
use MPI_MIN instead of MPI_MAX when appropriate, otherwise
a currently used CID can be reused, and bad things will likely happen.
Refs open-mpi/ompi#2061
This commit updates the intercomm allgather to do a local comm bcast
as the final step. This should resolve a hang seen in intercomm
tests.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit should restore the pre-non-blocking behavior of the CID
allocator when threads are used. There are two primary changes: 1)
do not hold the cid allocator lock past the end of a request callback,
and 2) if a lower id communicator is detected during CID allocation
back off and let the lower id communicator finish before continuing.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit simplifies the communicator context ID generation by
removing the blocking code. The high level calls: ompi_comm_nextcid
and ompi_comm_activate remain but now call the non-blocking variants
and wait on the resulting request. This was done to remove the
parallel paths for context ID generation in preperation for further
improvements of the CID generation code.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit removes the --with-mpi-thread-multiple option and forces
MPI_THREAD_MULTIPLE support. This cleans up an abstration violation
in opal where OMPI_ENABLE_THREAD_MULTIPLE determines whether the
opal_using_threads is meaningful. To reduce the performance hit on
MPI_THREAD_SINGLE programs an OPAL_UNLIKELY is used for the
check on opal_using_threads in OPAL_THREAD_* macros.
This commit does not clean up the arguments to the various functions
that take whether muti-threading support is enabled. That should be
done at a later time.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit modifies ompi's process list group object to support a
sentinel value for non-existant ompi_proc_t objects. The sentinel was
chosen to be the negative of the opal_process_name_t of the associated
ompi_proc_t. This takes advantage of the fact that on most (all?)
systems the top bit of a user-space pointer is never set. If this
changes then a new sentinel will be needed.
In addition this commit modifies the way ompi_mpi_comm_world is
initialized to fill in the group with sentinel values if the number of
processes exceeds the new add_procs behavior cutoff.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Bring Slurm PMI-1 component online
Bring the s2 component online
Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways.
Bring the OMPI pubsub/pmi component online
Get comm_spawn working again
Ensure we always provide a cpuset, even if it is NULL
pmix/cray: adjust cray pmix component for pmix
Make changes so cray pmix can work within the integrated
ompi/pmix framework.
Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet
Cleanup comm_spawn - procs now starting, error in connect_accept
Complete integration
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
If the loops never get executed because CIDs are exhausted, then the
value of flag will be undefined.
Refs trac:4572
This commit was SVN r31546.
The following Trac tickets were found above:
Ticket 4572 --> https://svn.open-mpi.org/trac/ompi/ticket/4572
Due to a leak in the osc/rdma component we were running out of cids on
a one-sided tests. This resulted in a hang instead of an error. This
commit causes the nextcid algorithm to return an error if we run out
of cids.
cmr=v1.8.2:reviewer=jsquyres
This commit was SVN r31538.
the fortran handle. Use a seperate opal_pointer_array to keep track of
the fortran handles of communicators.
This commit also fixes a bug in ompi_comm_idup where the newcomm was not
set until after the operation completed.
cmr=v1.7.4:reviewer=jsquyres:ticket=trac:3796
This commit was SVN r29342.
The following Trac tickets were found above:
Ticket 3796 --> https://svn.open-mpi.org/trac/ompi/ticket/3796
MPI_Comm_idup.
As part of this work I implemented a basic request scheduler in
ompi/comm/comm_request.c. This scheduler might be useful for more
than just communicator requests and could be moved to ompi/request
if there is a demand. Otherwise I will leave it where it is.
Added a non-blocking version of ompi_comm_set to support ompi_comm_idup.
The call makes a recursive call to comm_dup and a non-blocking version
was needed. To simplify the code the blocking version calls the nonblocking
version and waits on the resulting request if one exists.
cmr=v1.7.4:reviewer=jsquyres:ticket=trac:3796
This commit was SVN r29334.
The following Trac tickets were found above:
Ticket 3796 --> https://svn.open-mpi.org/trac/ompi/ticket/3796
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
that has been temporarily stored in the communicator_array should be removed
or the finalization will segfault (the same communicator will be released
twice).
This commit was SVN r28214.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
