but reset everything else. Once initialized the condition (and the attached
mutex) should be kept alive as long as possible if we want to be able to
retrieve all the informations.
This commit was SVN r12253.
Fix the problem observed by multiple people that comm_spawned children were (once again) being mapped onto the same nodes as their parents. This was caused by going through the RAS a second time, thus overwriting the mapper's bookkeeping that told RMAPS where it had left off.
To solve this - and to continue moving forward on the ORTE development - we introduce the concept of attributes to control the behavior of the RM frameworks. I defined the attributes and a list of attributes as new ORTE data types to make it easier for people to pass them around (since they are now fundamental to the system, and therefore we will be packing and unpacking them frequently). Thus, all the functions to manipulate attributes can be implemented and debugged in one place.
I used those capabilities in two places:
1. Added an attribute list to the rmgr.spawn interface.
2. Added an attribute list to the ras.allocate interface. At the moment, the only attribute I modified the various RAS components to recognize is the USE_PARENT_ALLOCATION one (as defined in rmgr_types.h).
So the RAS components now know how to reuse an allocation. I have debugged this under rsh, but it now needs to be tested on a wider set of platforms.
This commit was SVN r12138.
I have tested on rsh, slurm, bproc, and tm. Bproc continues to have a problem (will be asking for help there).
Gridengine compiles but I cannot test (believe it likely will run).
Poe and xgrid compile to the extent they can without the proper include files.
This commit was SVN r12059.
It turns out that we were improperly allocating an array if -np was not passed. Also, we were not really using this array for anything. So this gets rid of the array and performs some minor cleanup.
This commit was SVN r11934.
The following Trac tickets were found above:
Ticket 452 --> https://svn.open-mpi.org/trac/ompi/ticket/452
on 64 bit platforms sizeof(size_t) != sizeof(orte_std_cntr_t), and we were incorrectly
assuming this when dealing with num procs. It worked on little endian platforms, but
not big endian. So change num_procs to type int, and cast where needed.
This commit was SVN r11796.
Add --enable-orterun-prefix-by-default (and a synonym:
--enable-mpirun-prefix-by-default) to make orterun always behave as if
"--prefix $prefix" was given on the command line (where $prefix is the
value given to the --prefix option to configure). This prevents many
rsh/ssh users from needing to modify their shell startup files to set
the LD_LIBRARY_PATH for Open MPI (they will still need to set PATH or
otherwise find the OMPI executables to mpicc/mpirun/etc. their MPI
applications).
Also added --noprefix option to orterun to disable this behavior.
Finally, note that even if --enable-orterun-prefix-by-default is
specified, if the user specifies --prefix or /path/to/mpirun, these
options will override the default value of the prefix ($prefix).
This commit was SVN r11669.
The following Trac tickets were found above:
Ticket 377 --> https://svn.open-mpi.org/trac/ompi/ticket/377
Other changes:
1. Remove the old xcpu components as they are not functional.
2. Fix a "bug" in orterun whereby we called dump_aborted_procs even when we normally terminated. There is still some kind of bug in this procedure, however, as we appear to be calling the orterun job_state_callback function every time a process terminates (instead of only once when they have all terminated). I'll continue digging into that one.
This will require an autogen/configure, I'm afraid.
This commit was SVN r11228.
Clean up the remainder of the size_t references in the runtime itself. Convert to orte_std_cntr_t wherever it makes sense (only avoid those places where the actual memory size is referenced).
Remove the obsolete oob barrier function (we actually obsoleted it a long time ago - just never bothered to clean it up).
I have done my best to go through all the components and catch everything, even if I couldn't test compile them since I wasn't on that type of system. Still, I cannot guarantee that problems won't show up when you test this on specific systems. Usually, these will just show as "warning: comparison between signed and unsigned" notes which are easily fixed (just change a size_t to orte_std_cntr_t).
In some places, people didn't use size_t, but instead used some other variant (e.g., I found several places with uint32_t). I tried to catch all of them, but...
Once we get all the instances caught and fixed, this should once and for all resolve many of the heterogeneity problems.
This commit was SVN r11204.
Added another system-level test function for ORTE that just spins until terminated by a ctrl-c signal.
Modified orterun - added a couple of newlines to the output when abnormally terminating so the prompt always is on a new line.
This commit was SVN r10866.
- change -no_oversubscribe to -nooversubscribe (to be similar to
-nolocal)
- Added text to orterun.1 describing slots and -nooversubscribe
Still need to add text about "mpirun a.out" functionality, and RHC
wants to make some minor edits, so committing for synchronization.
This commit was SVN r10800.
Update the help text to report errors when not following that rule.
Also updated the RMAPS help text to reflect the reorganization of some of the round-robin code into the base.
The new functionality has been tested under Mac OS-X and on Odin using an MPI program. Both byslot and bynode mapping have been checked and verified. Operational support for other systems needs to be verified - I respectfully request people's help in doing so.
This commit was SVN r10708.
/tmp/tm-merge). Validated by RHC. Summary:
- Add --nolocal (and -nolocal) options to orterun
- Make some scalability improvements to the tm pls
This commit was SVN r10651.
This moves the logic to create the symbolic links for:
- mpirun
- mpiexec
- ompi-ps
- ompi-clean
and their respective man pages to the ompi level from
the orte layer.
This is a bit pedantic, but orte shouldn't be doing the
work of ompi since that is a bit of an abstraction break.
Note: need to autogen.sh to get this. Sorry :(
This commit was SVN r10602.
SIGUSR2. This can be extended later if needed to include other
signals we should forward to the user processes (TSTP and CONT,
perhaps?)
* Since the signal handlers don't actually run in signal context, we
can use malloc/fprintf/etc. So clean up some of the signal handler
code so that we don't keep message buffers around for the life of
the process
This commit was SVN r10496.
mpirun/orterun now has an option to print the version number. If -V/--version
is given, it will print the version number. If it's the only option, we
exit cleanly. Otherwise, we continue on as if --version wasn't given
(except we've printed the version number).
--This line, and th se below, will be ignored--
M orte/tools/orterun/orterun.c
M orte/tools/orterun/help-orterun.txt
This commit was SVN r10276.
1. Changed the RMGR and PLS APIs to add "signal_job" and "signal_proc" entry points. Only the "signal_job" entries are implemented - none of the components have implementations for "signal_proc" at this time. Thus, you can signal all of the procs in a job, but cannot currently signal only one specific proc.
2. Implemented those new API functions in all components except xgrid (Brian will do so very soon). Only the rsh/ssh and fork modules have been tested, however, and only under OS-X.
3. Added signal traps and callback functions for SIGUSR1/2 to orterun/mpirun that catch those signals and call the appropriate commands to propagate them out to all processes in the job.
4. Added a new test directory under the orte branch to (eventually) hold unit and system level tests for just the run-time. Since our test branch of the repository is under restricted access, people working on the RTE were continually developing their own system-level tests - thus making it hard to help diagnose problems. I have moved the more commonly-used functions here, and added one specifically for testing the SIGUSR1/2 functionality.
I will be contacting people directly to seek help with testing the changes on more environments. Other than compile issues, you should see absolutely no change in behavior on any of your systems - this additional functionality is transparent to anyone who does not issue a SIGUSR1/2 to mpirun.
Ralph
This commit was SVN r10258.
option as discussed on the devel-core mailing list. The Big
Difference is that instead of hard-coding the strings "/lib" and
"/bin" in to append to the prefix, we append the basename of the local
libdir and bindir. Hence, if your libdir is $prefix/lib64, we'll
append /lib64 to construct the remote node's LD_LIBRARY_PATH (etc.).
Also appended the orterun.1 man page to include a description of
--prefix, how it is constructed, what it handles / what it does not,
etc.
This commit was SVN r9930.
in San Jose. Allow the configure option --disable-binaries to build OMPI,
but not build or install the support binaries (so basically, just build
the libraries).
This commit was SVN r9777.
