In OMPI 2.1.2, buildrpm.sh could work with a value of rpmtopdir that was
set in the environment. In newer versions this is no longer true,
causing such values to be ignored. This patch adds a new argument to
buildrpm.sh, -R, which allows the user to specify where to build the
RPMs.
Signed-off-by: Michael Heinz <michael.william.heinz@intel.com>
(cherry picked from commit 687a5603a122af332bb939bba13aec78beb206cd)
The rdma_frag attached to the send request was not correctly released
upon request completion, leaking until MPI_Finalize. A quick solution
would have been to add RDMA_FRAG_RETURN at different locations on the
send request completion, but it would have unnecessarily made the
sendreq completion path more complex. Instead, I added the length to
the RDMA fragment so that it can be completed during the remote ack.
Be more explicit on the comment.
The rdma_frag can only be freed once when the peer forced a protocol
change (from RDMA GET to send/recv). Otherwise the fragment will be
returned once all data pertaining to it has been trasnferred.
NOTE: Had to add a typedef for "opal_atomic_size_t" from master into
opal/threads/thread_usage.h into this cherry pick (it is in
opal/include/opal_stdatomic.h on master, but that file does not exist
here on the v4.0.x branch).
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
(cherry picked from commit a16cf0e4dd6df4dea820fecedd5920df632935b8)
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
In case of using a btl_put in ob1, the handle of the locally registered
memory is sent with a PUT control message. In the current master code
the sent handle is necessary the handle in the frag but if the handle
has been successfully registered in the request, the frag structure does
not have any valid handle and all fragments use the request one.
I suggest to check if the handle in the fragment is valid and if not to
send the handle from the request.
Signed-off-by: Brelle Emmanuel <emmanuel.brelle@atos.net>
(cherry picked from commit e630046a4b82bc01379fb055af4c0e414c2a8e8f)
The new routine transfers the data asynchronously from the source PE to all
PEs in the OpenSHMEM job. The routine returns immediately. The source and
target buffers are reusable only after the completion of the routine.
After the data is transferred to the target buffers, the counter object
is updated atomically. The counter object can be read either using atomic
operations such as shmem_atomic_fetch or can use point-to-point synchronization
routines such as shmem_wait_until and shmem_test.
Signed-off-by: Mikhail Brinskii <mikhailb@mellanox.com>
(cherry picked from commit 2ef5bd8b3671f1e10caf00d06d66d120eac9c5be)
unless configure'd with --enable-mpi1-compatibility
This is a one-off commit for the v4.0.x branch since these symbols were
simply removed from master.
Thanks Lisandro Dalcin for reporting this.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
make-authors.pl checks that .git exists and is a directory before
getting the git log - but when a repo is checked out as a submodule of a
larger repository, .git is not a directory, it's just a text file. This
can cause make-authors.pl to terminate inappropriately.
Author: Michael Heinz <michael.william.heinz@intel.com>
Signed-off-by: Michael Heinz <michael.william.heinz@intel.com>
(cherry picked from commit 0a8fa5439c626c01a68fd9cebda8f00597500f51)
There are a couple MPI_Alltoallv calls in ad_gpfs_aggrs.c where the
send/recv data comes from places like req[r].lens, and the send
buffer and send displacements for example were being calculated as
sbuf = pick one of the reqs: req[bottom].lens
sdisps[r] = req[r].lens - req[bottom].lens
which might be okay if the .lens was data inside of req[] so they'd
all be close to each other. But each .lens field is just a pointer
that's malloced, so those addresses can be all over the place, so the
integer-sized sdisps[] isn't safe.
I changed it to have a new extra array sbuf and rbuf for those two
Alltoallv calls, and copied the data into the sbuf from the same
locations it used to be setting up the sdisps[] at, and after the
Alltoallv I copy the data out of the new rbuf into the same
locations it used to be setting up the rdisps[] at.
For what it's worth I was able to get this to fail -np 2 on a GPFS
filesystem with hints romio_cb_write enable. I didn't whittle the
test down to something small, but it was failing in an
MPI_File_write_all call.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
(cherry picked from commit d85cac8f1a11495415b67ecab69d2ae1cd19d155)
In the case the btl_get fails Ob1 tries to fallback on btl_put first but
the return code was ignored. So the code fell back on both btl_put and
btl_send.
Signed-off-by: Brelle Emmanuel <emmanuel.brelle@atos.net>
(cherry picked from commit 9c689f2225d29aa152627f39bab841afead254af)
The new proc group is created from the "world_group" based on the
ranks mapping which can be directly taken from proc_name->vpid.
Signed-off-by: Valentin Petrov <valentinp@mellanox.com>
We missed an assert to check if ALLOW_OVERTAKE is set or not before
validating the sequence number and this will cause deadlock.
Signed-off-by: Thananon Patinyasakdikul <tpatinya@utk.edu>
(cherry picked from commit 0263456cf4e99efc67d38acd100cf948e0399d63)
In fint_2_int.h there are some conversion macros for logicals. It has
one path for OMPI_SIZEOF_FORTRAN_LOGICAL != SIZEOF_INT where a new array
would be allocated and the conversions then might expand to
c_array[i] = (array[i] == 0 ? 0 : 1)
and another path for OMPI_SIZEOF_FORTRAN_LOGICAL == SIZEOF_INT where it
does things "in place", so the same conversion there would just be
array[i] = (array[i] == 0 ? 0 : 1)
The problem is some of the logical arrays being converted are INPUT
arguments. And it's possible for some compilers to even put the argument
in read-only memory so the above "in place" conversion SEGV's. A
testcase I have used
call MPI_CART_SUB(oldcomm, (/.true.,.false./), newcomm, ierr)
and gfortran put the second arg in read-only mem.
In cart_sub_f.c you can trace the ompi_fortran_logical_t *remain_dims arg.
remain_dims[] is for input only, but the file uses
OMPI_LOGICAL_ARRAY_NAME_DECL(remain_dims);
OMPI_ARRAY_LOGICAL_2_INT(remain_dims, ndims);
PMPI_Cart_sub(..., OMPI_LOGICAL_ARRAY_NAME_CONVERT(remain_dims), ...);
OMPI_ARRAY_INT_2_LOGICAL(remain_dims, ndims);
to convert it to c-ints make a C call then restore it to Fortran logicals
before returning.
It's not always wrong to convert purely in-place, eg cart_get_f.c has
a periods[] that's exclusively for OUTPUT and it would be fine with the
macros as they were. But I still say the macros are invalid because they
don't distinguish whether they're being used on INPUT or OUTPUT args and
thus they can't be used in a way that's legal for both cases.
It might be possible to fix the macros by adding more of them so that
cart_create_f.c and cart_get_f.c would use different macros that give
more context. But my fix here is just to turn off the first block and
make all paths run as if OMPI_SIZEOF_FORTRAN_LOGICAL != SIZEOF_INT.
The main macros that get enlarged by this change are
define OMPI_ARRAY_LOGICAL_2_INT_ALLOC : mallocs now
define OMPI_ARRAY_LOGICAL_2_INT : also mallocs now
But these are only used in 4 places, three of which are the purpose of
this checkin, to avoid the former in-place expansion of an INPUT arg:
cart_create_f.c
cart_map_f.c
cart_sub_f.c
and one of which is an OUPUT arg that was fine and that gets
unnecessarily expanded into a separate array by this checkin.
cart_get_f.c
So I think an unnecessary malloc in cart_get_f.c is the only downside
to this change, where the logicals array argument could have been used
and converted in place.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
Update provided by Gilles Gouaillardet to keep the in-place option
if OMPI_FORTRAN_VALUE_TRUE == 1 where no conversion is needed.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
(cherry picked from commit 0a7f1e3cc58dabe536df00ae9c97f7e9d27103ad)
This is so when a debugger attaches using MPIR, it can step out of this stack back into main.
This cannot be done with certain aggressive optimisations and missing debug information.
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Co-authored-by: Jeff Squyres <jsquyres@cisco.com>
(cherry-picked from 20f5840)
