done this way a long time ago for the "gee whiz!" factor -- when in
reality, they really only need one-of-many-run-time priority
selection).
Changed run-time priorities to be as follows:
* darwin: 20
* linux: 20
* posix: 10
* solaris: 30
* test: 5
* windows: 20
I have a very dim (possibly untrue) recollection that Solaris needs to
have a higher priority than others just to ensure that no other is
chosen under Solaris. Make all other "native" components have a
priority of 20 (they shouldn't conflict with each other). Make the
posix fallback component have a priority of 10. Make the test
component priority 5, meaning someone can always select it, but you
can also make a "never select me" component that prioritizes itself
under test.
This commit was SVN r22997.
party/"vendor" import, the changes are actually far smaller than the
size of this changeset implies. Here's a list of the changes:
* Update the AMD license header in plpa_map.c to be less restrictive
(see https://svn.open-mpi.org/trac/plpa/changeset/262 for details)
-- '''this is the most/only important change of this update.''' No
code is changed by this; only removing a clase from a license
header in plpa_map.c.
* Changes to the generated {{{configure}}}, {{{config.guess}}}, and
{{{config.sub}}} scripts (which aren't used by OMPI).
* soname version tracking changes (which also aren't used by OMPI;
they're only used when PLPA is built/installed in "standalone"
mode).
* Update the "get version" m4 (which was stolen from OMPI's m4 to
begin with, and is only used during OMPI's autogen.sh step).
* Update various PLPA version numbers to 1.3.2.
* Bug fix in plpa-taskset (which is not built in the OMPI PLPA build).
This commit was SVN r22367.
opposite of MAKE_MEM_DEFINED. Also add in a call to NOACCESS to
(mostly) reverse the effects of MAKE_MEM_DEFINED (technically, page 0
was accessible before this, even though it's a Bad Idea to access it).
This commit was SVN r22056.
masks between the mask argument and a local PLPA mask. There were three
problems:
1) The "get" function computed the number of bits as sizeof(mask),
which is the size of the pointer to the mask rather than the mask
itself. So, only 4 bits were copied with m32 and 8 bits with m64.
There are actually 1024 bits.
2) The "get" and "set" functions both copied a number of bits computed
from the sizeof() mask, but sizeof() reports the number of bytes.
We have to multiply by 8 to get the number of bits.
3) These two functions check to make sure tha the mask argument is not
bigger than the PLPA mask. But, the set function copies a number
of bits in the PLPA mask, which is conceivably greater than the
number of bits in the mask argument. So, accesses to the mask
argument may overrun that argument.
Problems 1 and 2 meant that one would encounter errors when the number of
cores exceeded 4 (with -m32) or 8 (with -m64). Problem 3 probably caused
no errors.
This commit was SVN r21993.
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
known-bad memory access pattern. Specifically, a NULL pointer is
passed in a system call as part of a probe to figure out which
affinity API this system has. We know it's a NULL and we did it on
purpose, so don't have Valgrind yell about it.
This commit was SVN r20572.
See opal/mca/paffinity/paffinity.h for explanation as to the physical vs logical nature of the params used in the API.
Fixes trac:1435
This commit was SVN r19391.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
Bring in a new version of PLPA (v1.2b2) with some new capabilities for
offline processors and mapping of the Nth processor/socket/core to its
corresponding Linux processor/socket/core ID.
(Sorry for the configure change in the middle of the day, folks -- I
need it to be able to continue to integrate paffinity changes for
#1435...)
This commit was SVN r19282.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
* Fix linux paffinity component to make a "best" guess when PLPA
can't find topology information in the Linux kernel. That is, if
PLPA can't tell us the max_processor_id, just assume that it's the
same as the number of processors. If you have a more complex
system than that (e.g., you have holes in your available processor
IDs), you'll likely be running a Linux kernel that supports the
topology information, and this problem won't happen.
* Make sure to conver the return codes from PLPA to OPAL_ERR* codes.
This commit was SVN r19001.
The following Trac tickets were found above:
Ticket 1250 --> https://svn.open-mpi.org/trac/ompi/ticket/1250
1. If we don't have the topology information, don't bother trying to
create cross-referencing information
1. Ensure to only check for valid processor ID's
This commit was SVN r18462.
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php
{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}
Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.
Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.
This commit was SVN r18381.
map_to_processor_id,
map_to_socket_core,
max_processor_id,
max_socket,
max_core.
In OS other then Linux, those functions will return OPAL_ERR_NOT_SUPPORTED.
--This Line, and those below, will be ignored--
M paffinity/linux/paffinity_linux_module.c
M paffinity/paffinity.h
M paffinity/base/base.h
M paffinity/base/paffinity_base_wrappers.c
M paffinity/windows/paffinity_windows_module.c
M paffinity/solaris/paffinity_solaris_module.c
This commit was SVN r17173.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
Ensure that the AM_CONDITIONALs are ''always'' run, even if we
--enable-mca-no-build the paffinity/linux component.
This commit was SVN r15095.
The following Trac tickets were found above:
Ticket 1057 --> https://svn.open-mpi.org/trac/ompi/ticket/1057
* Enable VPATH builds to work (slight tweak of r14895 -- mainly
because I already had it done when George committed :-) )
* Enable "make dist" to work properly for PLPA included mode
* Update plpa.h.in
* Update svn:ignore
Took relevant changes back to the main PLPA SVN as well.
This commit was SVN r14896.
The following SVN revision numbers were found above:
r14895 --> open-mpi/ompi@bb7b04e875
Changes paffinity interface to use a cpu mask for available/preferred cpus
rather than the current coarse grained paffinity that lets the OS choose
which processor.
Macros for setting and clearing masks are provided.
Solaris and windows changes have not been made. Solaris subdirectory has some
suggested changes - however the relevant man pages for the Solaris 10 APIs
have some ambiguity regarding order in which one create and sets a processor
set. As we did not have access to a solaris 10 machine we could not test to
see the correct way to do the work under solaris.
This commit was SVN r14887.
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
