This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
be used for 64-bit SPARC because of performance
implications. Also added minor optimization to
macro.
This fixes trac:2526.
This commit was SVN r23590.
The following Trac tickets were found above:
Ticket 2526 --> https://svn.open-mpi.org/trac/ompi/ticket/2526
status structure or the _ucount field in the status structure.
On 64-bit sparc, the macros resolve into integer array assignments.
For all others, they are just simple assignments. This fixes
possible BUS errors seen when running on the SPARC processor.
This bug was introduced when the _count field changed from an int
into a size_t. See the changes to request.h for additional details.
This commit fixes trac:2514.
This commit was SVN r23554.
The following Trac tickets were found above:
Ticket 2514 --> https://svn.open-mpi.org/trac/ompi/ticket/2514
step is the configure and Fortran mojo that Jeff will put in. Until then I
guess the Fortran interface is broken (at least all functions using the hidden
count firld in the MPI_Status).
This commit was SVN r23467.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
the debugger plugins into files suffixed by _dbg.h.
This commit was SVN r21404.
The following Trac tickets were found above:
Ticket 1931 --> https://svn.open-mpi.org/trac/ompi/ticket/1931
not end up in OPAL
- Will post an updated patch for the OMPI_ALIGNMENT_ parts (within C).
This commit was SVN r21342.
The following SVN revision numbers were found above:
r21330 --> open-mpi/ompi@95596d1814
into the OPAL namespace, eliminating cases like opal/util/arch.c
testing for ompi_fortran_logical_t.
As this is processor- and compiler-related information
(e.g. does the compiler/architecture support REAL*16)
this should have been on the OPAL layer.
- Unifies f77 code using MPI_Flogical instead of opal_fortran_logical_t
- Tested locally (Linux/x86-64) with mpich and intel testsuite
but would like to get this week-ends MTT output
- PLEASE NOTE: configure-internal macro-names and
ompi_cv_ variables have not been changed, so that
external platform (not in contrib/) files still work.
This commit was SVN r21330.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
correctly in case of MPI_PROC_NULL with persistent requests.
As of r12339, the req_status of the request is initialized
correclty and being used in {{{ompi_request_test}}} and
{{{ompi_request_wait}}}.
So, just set the status, getting rid of the if-statement.
Checked by Jeff using mtt.
This commit was SVN r19485.
The following SVN revision numbers were found above:
r12339 --> open-mpi/ompi@020efdf1f9
* Add specific comments about why we're not setting MPI_ERROR here
This commit was SVN r18616.
The following SVN revision numbers were found above:
r18067 --> open-mpi/ompi@58e31d767e
1. The send path get shorter. The BTL is allowed to return > 0 to specify that the
descriptor was pushed to the networks, and that the memory attached to it is
available again for the upper layer. The MCA_BTL_DES_SEND_ALWAYS_CALLBACK flag
can be used by the PML to force the BTL to always trigger the callback.
Unmodified BTL will continue to work as expected, as they will return OMPI_SUCCESS
which force the PML to have exactly the same behavior as before. Some BTLs have
been modified: self, sm, tcp, mx.
2. Add send immediate interface to BTL.
The idea is to have a mechanism of allowing the BTL to take advantage of
send optimizations such as the ability to deliver data "inline". Some
network APIs such as Portals allow data to be sent using a "thin" event
without packing data into a memory descriptor. This interface change
allows the BTL to use such capabilities and allows for other optimizations
in the future. All existing BTLs except for Portals and sm have this interface
set to NULL.
This commit was SVN r18551.
(sometimes after the merge with the ORTE branch), the opal_pointer_array
will became the only pointer_array implementation (the orte_pointer_array
will be removed).
This commit was SVN r17007.
A new global structure (ompi_request_functions) holding all the pointers to the wait/test functions have been added. ompi_request_wait* and ompi_request_test* have been #defined to be replaced by ompi_request_functions.req_wait. The default implementations of the wait/test functions names have been changed from ompi_request_% to ompi_request_default_%. Those functions are static initializer of the ompi_request_functions structure.
To modify the defaults, a components 1) copy the ompi_request_functions structure (the type ompi_request_fns_t can be used to declare a suitable variable), 2) change some of the functions according to its needs. This is best done at MPI_init time when there is no threads. Should this component be unloaded it have to restore the defaults. The ompi_request_default_* functions should never be called directly anywhere in the code. If a component needs to access the previously defined implementation of wait, it should call its local copy of the function. Component implementors should keep in mind that another component might have already changed the defaults and needs to be called.
This commit was SVN r16862.
Change order of initialization as in the declaration
Add missing initialization of req_persistent and req_mpi_object
to ompi_request_empty and ompi_request_null.
This commit was SVN r16536.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
This commit fixes several aspects regarding MPI conformance of requests.
* Eliminate the last argument of ompi_errhandler_request_invoke(); we
''always'' want to invoke the back-end exception handler with the
real error code.
* Make it clear in comments that we only invoke the ''first''
exception in a given array of requests, even if there's more than
one request with a non-MPI_SUCCESS value for MPI_ERROR.
* Defer the freeing of requests upon exception in the back-end
functions to MPI_WAIT* and MPI_TEST* until later; the requests are
kept so that we know what handler to invoke when we actually invoke
the exception. After figuring that out, ''then'' we free requests
with pending exceptions on them.
* Clean up return codes from the back-end MPI_TEST* and MPI_WAIT*
functions.
* Slightly modify ompi_errcode_get_mpi_code() to return unity if it
receives an MPI error code (vs. an OMPI error code).
This commit was SVN r12810.
The following Trac tickets were found above:
Ticket 659 --> https://svn.open-mpi.org/trac/ompi/ticket/659
* Add MPI::Status methods Set_elements() and Set_cancelled()
* Added a bunch of comments in various places in the MPI C++ bindings
implementatio just to explain what's going on (because C++ can hide
a lot from you)
* Insert C++ callbacks for the MPI_Grequest callback functions
registered by MPI::Grequest::Start(). These callbacks keep a
little meta-data (created by Grequest::Start()) that allow the
proper callback signatures from C (i.e., from ompi_grequest_<foo>()
in libmpi.a -- C code), translate arguments as required, and then
invoke the callbacks with proper C++ signatures (i.e., call
user-defined callbacks with C++ function signatures).
This commit was SVN r12446.
The following Trac tickets were found above:
Ticket 580 --> https://svn.open-mpi.org/trac/ompi/ticket/580
* Add some more error checking to GREQUEST_START
* Move the error checking in GREQUEST_COMPLETE up to inside the
MPI_PARAM_CHECK block, where it belongs
* Invoke the gen request query_fn in all the Right spots (per MPI-2:8.2)
* Distinguish between grequests created from C and Fortran
* Use the OBJ system to reference count to release the grequest at
the Right time and invoke the grequest free_fn properly (see
lengthy comment in grequest.c above the destructor)
* Have ompi_grequest_complete() call ompi_request_complete() rather
than [poorly] copy the contents of ompi_request_complete()
* Fix Fortran function callback pointer typedefs to use proper
Fortran types
* Edit ompi_request_test* and ompi_request_wait* to properly handle
generalized requests. This adds an "if" statement in the critical
path for all the back-end test* and wait* functions :-(,
but fortunately George took out two "if" statements from the
critical path last week. So we're still ahead. :-)
* Move ompi_request_test() out of request.h and into request.c (all
other test* and wait* functions were already in the .c file -- and
ompi_request_test() was too long to be statically inlined anyway)
This commit was SVN r12402.
The following Trac tickets were found above:
Ticket 496 --> https://svn.open-mpi.org/trac/ompi/ticket/496
This commit essentially caches the invoking comm/win/file on the
ompi_request_t. This, paired with the req_type field, allows us to
retrieve the invoking MPI object and invoke the proper errhandler.
The patch is missing most updates for the MPI-2 one-sided stuff (i.e.,
the patch mainly fixes comms and files); I didn't really understand
that code and didn't want to hazard trying to figure it out when Brian
can probably do it much more quickly.
So #250 will still stay open, pending MPI-2 one-sided updates for this
stuff.
This commit was SVN r12339.
The following Trac tickets were found above:
Ticket 250 --> https://svn.open-mpi.org/trac/ompi/ticket/250
* Create a new request type: NOOP (described below)
* For all MPI_*_INIT functions, OBJ_NEW an ompi_request_t and set its
type to NOOP
* Ensure that the NOOP requests are OBJ_RELEASE'd when they are done
* MPI_START looks at the request type; if NOOP, just return success. If
not, call the PML start() function
* MPI_STARTALL always pass the entire array of requests back to the PML
(see next point)
* Make the PMLs only process PML requests (i.e., ignore/skip anything
that isn't of type PML -- such as the NOOP requests)
* Add a little more param error checking in STARTALL
This commit was SVN r12338.
The following Trac tickets were found above:
Ticket 529 --> https://svn.open-mpi.org/trac/ompi/ticket/529
* Remove an extra OMPI_REQUEST_INIT() from the grequest constructor
(it was already invoked by the parent MPI_Request constructor)
* Set the state of the generalized request to ACTIVE (because this is
invoked from MPI_GREQUEST_START -- analogous to MPI_START)
* Before invoking the query function in MPI_REQUEST_COMPLETE, set the
status on the base request to ompi_status_empty. This gives a set
of default values for the request, including one for
status.MPI_ERROR = MPI_SUCCESS (because we check the value of
MPI_ERROR in MPI_TEST* and MPI_WAIT* processing, and use it to
determine whether the upper-level API call should raise an MPI
exception or not).
This commit was SVN r12337.
The following Trac tickets were found above:
Ticket 532 --> https://svn.open-mpi.org/trac/ompi/ticket/532
