This commit fixes several bugs in the osc/rdma component:
- Complete aggregated requests immediately. Completion of RMA
requests indicates local completion anyway. This fixes a hang in
the c_reqops test.
- Correctly mark Rget_accumulate requests.
- Set the local base flag correctly on the local peer.
- Clear or set the no locks flag on the window if the value is
changed by MPI_Win_set_info.
- Actually update the target when using MPI_OP_REPLACE.
Fixesopen-mpi/ompi#1010
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes an issue identified by @rolfv. The local peer was
not being correctly initialized when running with a single process on
a node.
This fixesopen-mpi/ompi#1010
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix code paths that didn't convert the MPI datatype to the
corresponding Portals4 datatype.
Thanks to Nicolas Chevalier (@shawone) for finding this bug and
submitting a patch.
Fixed CID 1269712, 1269709, 1269706, 1269703, 1269694: Logically dead code
Remove extra NULL check as OMPI_OSC_PT2PT_REQUEST_ALLOC can never set the
request to NULL.
Fixes CID 1269668: Unchecked return value
False positive. Add (void) to indicate we do not care about the return code
from opal_hash_table_get_uint32.
Fixes CID 1324726: Free of address-of expression
Do not free lock if it was not allocated.
Fixes CID 1269658: Free of address-of expression
Never will happen but because op is always a built-in op there is no
reason to retain/release it anyway.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
In the default mode of operation, the Portals4 components support
dynamic add_procs().
The Portals4 components have two alternate modes (flow control and
logical-to-physical) that require knowledge of all procs at startup.
In these modes, mtl-portals4 sets the MCA_MTL_BASE_FLAG_REQUIRE_WORLD
flag and btl-portals4 sets the MCA_BTL_FLAGS_SINGLE_ADD_PROCS flag
to tell the PML that we need all the procs in one add_procs() call.
The osc/sm component was using a simple counter to determine if all
expected posts had arrived to start a PSCW access epoch. This is
incorrect as a post may arrive from a peer that isn't part of the
current start group. There are many ways this could have been fixed.
This commit adds an n^2 bitmap. When a process posts it sets a bit in
the bitmap associated with the access rank to indicate the post is
complete. The access rank checks for and clears the bits associated
with all the processes in the start group.
The bitmap requires comm_size ^ 2 bits of space. This should be
managable as most nodes have relatively small numbers of processes. If
this changes another algorigthm can be implemented.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix CID 1324733: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324734: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324735: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324736: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324737: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324751: Memory - illegal accesses (USE_AFTER_FREE)
Fix CID 1324750: (USE_AFTER_FREE)
Fix CID 1324749: Memory - corruptions (USE_AFTER_FREE)
Fix CID 1324748: Memory - illegal accesses (USE_AFTER_FREE)
Fix CID 1324747: (USE_AFTER_FREE)
Fix CID 1324746: Memory - corruptions (USE_AFTER_FREE)
Add missing return on an error path.
Fix CID 1324745: Code maintainability issues (UNUSED_VALUE)
Ignore return code from barrier. It was not being used anyway.
Fix CID 1324738: Null pointer dereferences (FORWARD_NULL)
Fix CID 1324741: Null pointer dereferences (REVERSE_INULL)
module->selected_btl can not be NULL in osc/rdma during normal
operation. Removed the unnecessary NULL check.
Fix CID 1324752: Memory - illegal accesses (USE_AFTER_FREE)
Move ompi_osc_pt2pt_module_lock_remove to before the lock is freed.
Fix CID 1324744: Uninitialized variables (UNINIT)
Fix CID 1324743: Uninitialized variables (UNINIT)
This array is not used unitialized but there is no reason not to use
calloc here to silence the warning.
The following CID is a false positive: 1324742. I will mark it such in
coverity.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for performing one-sided operations over
supported hardware (currently Infiniband and Cray Gemini/Aries). This
component is still undergoing active development.
Current features:
- Use network atomic operations (fadd, cswap) for implementing
locking and PSCW synchronization.
- Aggregate small contiguous puts.
- Reduced memory footprint by storing window data (pointer, keys,
etc) at the lowest rank on each node. The data is fetched as each
process needs to communicate with a new peer. This is a trade-off
between the performance of the first operation on a peer and the
memory utilization of a window.
TODO:
- Add support for the accumulate_ops info key. If it is known that
the same op or same op/no op is used it may be possible to use
hardware atomics for fetch-and-op and compare-and-swap.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit updates osc/pt2pt to allocate peer object as they are
needed rather than all at once. Additionally, to help improve the
memory footprint a new synchronization structure has been added.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit modifies the ompi_group_t union/difference code to compare/copy the
raw group values. This will either be a ompi_proc_t or a sentinel value. This
commit also adds helper functions to convert between opal process names and
sentinel values.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
- MPI_Compare_and_swap
- MPI_Fetch_and_op
- MPI_Raccumulate
- MPI_Win_detach
Thanks to Michael Knobloch and Takahiro Kawashima for bringing this
to our attention
Portals4 supports atomic ops on datatypes less than or equal to
max_fetch_atomic_size bytes. This commit fixes a bug that required
the datatype to be less than max_fetch_atomic_size bytes.
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
In days past, some implementations of Portals4 could not cover all
of memory with a single Memory Descriptor so multiple large
overlapping Memory Descriptors were created. Because none of the
current implementations have this limitation (and no future
implementations should either), this commit removes the overlapping
Memory Descriptors code.
This commit fixes a bug identified by MTT that occurred when mixing
passive and active target synchronization. The bugs fixed in this
commit are:
- Do not update incoming fragment counts for any type of unbuffered
control message. These messages are out-of-band and should not be
considered towards the signal counts.
- Complete a change from using received counts to expected counts for
lock, unlock, and flush acks. Part of the change made it into
master before the rest was ready. This was preventing wakeups in
some cases.
- Turn the passive_target_access_epoch module member into a
counter. As long as at least one peer is locked we are in a
passive-target epoch and not an active target one. This fix will
ensure that fragment flags are set appropriately.
fixes#538
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Based on some on-list and IM discussion with @hjelmn about
open-mpi/ompi@40b7643119, change the testing to a switch/case. If we
fall into the default case, assert() error (because it's an OMPI
developer programming error).
The fragment flush code tries to send the active fragment before
sending any queued fragments. This could cause osc messages to arrive
out-of-order at the target (bad). Ensure ordering by alway sending
the active fragment after sending queued fragments.
This commit also fixes a bug when a synchronization message (unlock,
flush, complete) can not be packed at the end of an existing active
fragment. In this case the source process will end up sending 1 more
fragment than claimed in the synchronization message. To fix the issue
a check has been added that fixes the fragment count if this situation
is detected.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for project_framework_component_* parameter
matching. This is the first step in allowing the same framework name
in multiple projects. This change also bumps the MCA component version
to 2.1.0.
All master frameworks have been updated to use the new component
versioning macro. An mca.h has been added to each project to add a
project specific versioning macro of the form
PROJECT_MCA_VERSION_2_1_0.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit fixes a bug in osc/pt2pt which causes MPI_Win_unlock_all
to hang. The problem was caused by code refactoring that moved the
unlock of the local process to after the loop that waits for unlock
acks. This will cause the code to loop forever waiting on the self
ack.
Fixes#444
Use of the old ompi_free_list_t and ompi_free_list_item_t is
deprecated. These classes will be removed in a future commit.
This commit updates the entire code base to use opal_free_list_t and
opal_free_list_item_t.
Notes:
OMPI_FREE_LIST_*_MT -> opal_free_list_* (uses opal_using_threads ())
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
