1
1
Граф коммитов

10 Коммитов

Автор SHA1 Сообщение Дата
Rainer Keller
8e1b23779f - Replace combinations of
#if defined (c_plusplus)
          defined (__cplusplus)
   followed by
      extern "C" {
   and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.

   Notable exceptions are:
    - opal/include/opal_config_bottom.h:
      This is our generated code, that itself defines BEGIN_C_DECL and
      END_C_DECL
    - ompi/mpi/cxx/mpicxx.h:
      Here we do not include opal_config_bottom.h:                                 
    - Belongs to external code:                                                    
      opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c        
      opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h        
    - opal/include/opal/prefetch.h:
      Has C++ specific macros that are protected:                                  

    - Had #if ... } #endif  _and_ END_C_DECLS (aka end up with 2x
      END_C_DECLS)
      ompi/mca/btl/openib/btl_openib.h
    - opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
    - opal/win32/ompi_process.h: had extern "C"\n {...
      opal/win32/ompi_process.h: dito
    - ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
      ompi/mpi/f90/test/align_c.c: dito
    - ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
    - ompi/mpi/f90/xml/common-C.xsl: Amend

   Tested on linux using --with-openib and --with-mx

   The following do not contain either opal_config.h, orte_config.h or
   ompi_config.h
   (but possibly other header files, that include one of the above):
      ompi/mca/bml/r2/bml_r2_ft.h
      ompi/mca/btl/gm/btl_gm_endpoint.h
      ompi/mca/btl/gm/btl_gm_proc.h
      ompi/mca/btl/mx/btl_mx_endpoint.h
      ompi/mca/btl/ofud/btl_ofud_endpoint.h
      ompi/mca/btl/ofud/btl_ofud_frag.h
      ompi/mca/btl/ofud/btl_ofud_proc.h
      ompi/mca/btl/openib/btl_openib_mca.h
      ompi/mca/btl/portals/btl_portals_endpoint.h
      ompi/mca/btl/portals/btl_portals_frag.h
      ompi/mca/btl/sctp/btl_sctp_endpoint.h
      ompi/mca/btl/sctp/btl_sctp_proc.h
      ompi/mca/btl/tcp/btl_tcp_endpoint.h
      ompi/mca/btl/tcp/btl_tcp_ft.h
      ompi/mca/btl/tcp/btl_tcp_proc.h
      ompi/mca/btl/template/btl_template_endpoint.h
      ompi/mca/btl/template/btl_template_proc.h
      ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
      ompi/mca/btl/udapl/btl_udapl_endpoint.h
      ompi/mca/btl/udapl/btl_udapl_mca.h
      ompi/mca/btl/udapl/btl_udapl_proc.h
      ompi/mca/mtl/mx/mtl_mx_endpoint.h
      ompi/mca/mtl/mx/mtl_mx.h
      ompi/mca/mtl/psm/mtl_psm_endpoint.h
      ompi/mca/mtl/psm/mtl_psm.h
      ompi/mca/pml/cm/pml_cm_component.h
      ompi/mca/pml/csum/pml_csum_comm.h
      ompi/mca/pml/dr/pml_dr_comm.h
      ompi/mca/pml/dr/pml_dr_component.h
      ompi/mca/pml/dr/pml_dr_endpoint.h
      ompi/mca/pml/dr/pml_dr_recvfrag.h
      ompi/mca/pml/example/pml_example.h
      ompi/mca/pml/ob1/pml_ob1_comm.h
      ompi/mca/pml/ob1/pml_ob1_component.h
      ompi/mca/pml/ob1/pml_ob1_endpoint.h
      ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
      ompi/mca/pml/ob1/pml_ob1_recvfrag.h
      ompi/mca/pml/v/pml_v_output.h
      opal/include/opal/prefetch.h
      opal/mca/timer/aix/timer_aix.h
      opal/util/qsort.h
      test/support/components.h

This commit was SVN r21855.

The following SVN revision numbers were found above:
  r2 --> open-mpi/ompi@58fdc18855
2009-08-20 11:42:18 +00:00
George Bosilca
6afa4c6c64 Windows friendly version. We have to split the OMPI_DECLSPEC in at least 3
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.

This commit was SVN r11270.
2006-08-20 15:54:04 +00:00
Brian Barrett
566a050c23 Next step in the project split, mainly source code re-arranging
- move files out of toplevel include/ and etc/, moving it into the
    sub-projects
  - rather than including config headers with <project>/include, 
    have them as <project>
  - require all headers to be included with a project prefix, with
    the exception of the config headers ({opal,orte,ompi}_config.h
    mpi.h, and mpif.h)

This commit was SVN r8985.
2006-02-12 01:33:29 +00:00
Jeff Squyres
6bc6178e8d Make the comment explain much more fully what is going on (in typical
Jeff-length).  Also change it such that we also have a lt_dlhandle
type -- even in the case of --disable-dlopen.  Specifically, even in
the case of --disable-dlopen, we still have shell functions that use
an lt_dlhandle parameter, so we need that type, even if <ltdl.h> isn't
used.

This commit was SVN r8507.
2005-12-15 17:47:54 +00:00
George Bosilca
3e03a5f702 A better comment I hope ...
This commit was SVN r8477.
2005-12-12 23:39:40 +00:00
George Bosilca
39e8d4ce02 Protect the function definition not the typedef.
This commit was SVN r8475.
2005-12-12 22:33:02 +00:00
George Bosilca
6e5aeab0b5 Remove the dependance to ltdl.h for all the the places where we dont't really need it. Read
the comment for more informations.

This commit was SVN r8466.
2005-12-12 21:51:20 +00:00
Brian Barrett
c6fb3217f8 always include ltdl.h with the full opal path, so that we always grab our
version instead of the (possible) system installed version.

This commit was SVN r8248.
2005-11-23 19:30:12 +00:00
Jeff Squyres
42ec26e640 Update the copyright notices for IU and UTK.
This commit was SVN r7999.
2005-11-05 19:57:48 +00:00
Jeff Squyres
3962c53e2e - Add to AM_CPPFLAGS $(OPAL_LTDL_CPPFLAGS) where necessary in order to
add a -I to find the included ltdl.h (vs. a system-installed ltdl.h)
- Clean up kruft in a bunch of Makefile.am's to remove now-unnecessary
  AM_CPPFLAGS settings to get static-components.h for each framework
- Move the component_repository API functions out of opal/mca/base/base.h
  and into opal/mca/base/mca_base_component_repository.h in order to
  decrease unnecessary dependencies (e.g., before this, almost
  everything in the tree depended on ltdl.h, which is unnecessary --
  only a small number of files really need ltdl.h)

This commit was SVN r7127.
2005-09-01 12:16:36 +00:00