to a pending queue of eager rdma QP instead of correct pending list. This patch
fixes this by getting reed of "eager rdma qp" notion. Packet is always send
over its order QP. The patch also adds two pending queues for high and low prio
packets. Only high prio packets are sent over eager RDMA channel.
This commit was SVN r16780.
main idea (except of cleanup) is to save on initialisation of unneeded fields
and to use C type checking system to catch obvious errors.
This commit was SVN r16779.
Each one of them has a field to store QP type, but this is redundant.
Store qp type only in one structure (the component one).
This commit was SVN r16272.
/tmp/jms-modular-wireup branch):
* This commit moves all the openib BTL connection code out of
btl_openib_endpoint.c and into a connect "pseudo-component" area,
meaning that different schemes for doing OFA connection schemes can
be chosen via function pointer (i.e., MCA parameter) at run-time.
* The connect/connect.h file includes comments describing the
specific interface for the connect pseudo-component.
* Two pseudo-components are in this commit (more can certainly be
added).
* oob: use the same old oob/rml scheme for creating OFA connections
that we've had forever; this now just puts the logic into this
self-contained pseudo-component.
* rdma_cm: a currently-empty set of functions (that currently
return NOT_IMPLEMENTED) that will someday use the RDMA connection
manager to make OFA connections.
This commit was SVN r15786.
sender piggybacks a number of credit messages it received from a peer. A number
of outstanding credit messages is limited. This is needed to never ever fall
back to HW flow control.
This commit was SVN r15580.
1. Galen's fine-grain control of queue pair resources in the openib
BTL.
1. Pasha's new implementation of asychronous HCA event handling.
Pasha's new implementation doesn't take much explanation, but the new
"multifrag" stuff does.
Note that "svn merge" was not used to bring this new code from the
/tmp/ib_multifrag branch -- something Bad happened in the periodic
trunk pulls on that branch making an actual merge back to the trunk
effectively impossible (i.e., lots and lots of arbitrary conflicts and
artifical changes). :-(
== Fine-grain control of queue pair resources ==
Galen's fine-grain control of queue pair resources to the OpenIB BTL
(thanks to Gleb for fixing broken code and providing additional
functionality, Pasha for finding broken code, and Jeff for doing all
the svn work and regression testing).
Prior to this commit, the OpenIB BTL created two queue pairs: one for
eager size fragments and one for max send size fragments. When the
use of the shared receive queue (SRQ) was specified (via "-mca
btl_openib_use_srq 1"), these QPs would use a shared receive queue for
receive buffers instead of the default per-peer (PP) receive queues
and buffers. One consequence of this design is that receive buffer
utilization (the size of the data received as a percentage of the
receive buffer used for the data) was quite poor for a number of
applications.
The new design allows multiple QPs to be specified at runtime. Each
QP can be setup to use PP or SRQ receive buffers as well as giving
fine-grained control over receive buffer size, number of receive
buffers to post, when to replenish the receive queue (low water mark)
and for SRQ QPs, the number of outstanding sends can also be
specified. The following is an example of the syntax to describe QPs
to the OpenIB BTL using the new MCA parameter btl_openib_receive_queues:
{{{
-mca btl_openib_receive_queues \
"P,128,16,4;S,1024,256,128,32;S,4096,256,128,32;S,65536,256,128,32"
}}}
Each QP description is delimited by ";" (semicolon) with individual
fields of the QP description delimited by "," (comma). The above
example therefore describes 4 QPs.
The first QP is:
P,128,16,4
Meaning: per-peer receive buffer QPs are indicated by a starting field
of "P"; the first QP (shown above) is therefore a per-peer based QP.
The second field indicates the size of the receive buffer in bytes
(128 bytes). The third field indicates the number of receive buffers
to allocate to the QP (16). The fourth field indicates the low
watermark for receive buffers at which time the BTL will repost
receive buffers to the QP (4).
The second QP is:
S,1024,256,128,32
Shared receive queue based QPs are indicated by a starting field of
"S"; the second QP (shown above) is therefore a shared receive queue
based QP. The second, third and fourth fields are the same as in the
per-peer based QP. The fifth field is the number of outstanding sends
that are allowed at a given time on the QP (32). This provides a
"good enough" mechanism of flow control for some regular communication
patterns.
QPs MUST be specified in ascending receive buffer size order. This
requirement may be removed prior to 1.3 release.
This commit was SVN r15474.
we are looking at subnet_id's and we are counting active ports per subnet.
move subnet count out of procs loop,, no need to do it there...
This commit was SVN r13105.
udapl/openib/vapi/gm mpools a deprecated. rdma mpool has parameter that allows
to limit its size mpool_rdma_rcache_size_limit (default is 0 - unlimited).
This commit was SVN r12878.
What's happening is that we're holding openib_btl->eager_rdma_lock when
we call mca_btl_openib_endpoint_send_eager_rdma() on
btl_openib_endpoint.c:1227. This in turn calls
mca_btl_openib_endpoint_send() on line 1179. Then, if the endpoint
state isn't MCA_BTL_IB_CONNECTED or MCA_BTL_IB_FAILED, we call
opal_progress(), where we eventually try to lock
openib_btl->eager_rdma_lock at btl_openib_component.c:997.
The fix removes this lock altogether. Instead we atomically set local RDMA
pointer to prevent other threads to create rdma buffer for the same endpoint.
And we increment eager_rdma_buffers_count atomically thus polling thread doesn't
need lock around it.
This commit was SVN r12369.
addition to my design and testing, it was conceptually approved by
Gil, Gleb, Pasha, Brad, and Galen. Functionally [probably somewhat
lightly] tested by Galen. We may still have to shake out some bugs
during the next few months, but it seems to be working for all the
cases that I can throw at it.
Here's a summary of the changes from that branch:
* Move MCA parameter registration to a new file (btl_openib_mca.c):
* Properly check the retun status of registering MCA params
* Check for valid values of MCA parameters
* Make help strings better
* Otherwise, the only default value of an MCA param that was
changed was max_btls; it went from 4 to -1 (meaning: use all
available)
* Properly prototyped internal functions in _component.c
* Made a bunch of functions static that didn't need to be public
* Renamed to remove "mca_" prefix from static functions
* Call new MCA param registration function
* Call new INI file read/lookup/finalize functions
* Updated a bunch of macros to be "BTL_" instead of "ORTE_"
* Be a little more consistent with return values
* Handle -1 for the max_btls MCA param
* Fixed a free() that should have been an OBJ_RELEASE()
* Some re-indenting
* Added INI-file parsing
* New flex file: btl_openib_ini.l
* New default HCA params .ini file (probably to be expanded over
time by other HCA vendors)
* Added more show_help messages for parsing problems
* Read in INI files and cache the values for later lookup
* When component opens an HCA, lookup to see if any corresponding
values were found in the INI files (ID'ed by the HCA vendor_id
and vendor_part_id)
* Added btl_openib_verbose MCA param that shows what the INI-file
stuff does (e.g., shows which MTU your HCA ends up using)
* Added btl_openib_hca_param_files as a colon-delimited list of INI
files to check for values during startup (in order,
left-to-right, just like the MCA base directory param).
* MTU is currently the only value supported in this framework.
* It is not a fatal error if we don't find params for the HCA in
the INI file(s). Instead, just print a warning. New MCA param
btl_openib_warn_no_hca_params_found can be used to disable
printing the warning.
* Add MTU to peer negotiation when making a connection
* Exchange maximum MTU; select the lesser of the two
This commit was SVN r11182.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
