This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit fixes some issues with the cuda support parameters. There
were a couple of duplicate registrations and an incorrect synonym (one
variable was made a synonym of mpi_preconnect_mpi).
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
A few uninitialized common symbols are remaining:
common symbols generated by flex :
* opal/util/keyval/keyval_lex.l: opal_util_keyval_yyleng
* opal/util/keyval/keyval_lex.o: opal_util_keyval_yytext
* opal/util/show_help_lex.l: opal_show_help_yyleng
* opal/util/show_help_lex.l: opal_show_help_yytext
common symbol generated by "external" hwloc library:
* opal/mca/hwloc/hwloc191/hwloc/src/components.o: component_map
This commit fixes several vagrind errors. Included:
- installdirs did not correctly reinitialize all pointers to NULL
at close. This causes valgrind errors on a subsequent call to
opal_init_tool.
- several opal strings were leaked by opal_deregister_params which
was setting them to NULL instead of letting them be freed by the
MCA variable system.
- move opal_net_init to AFTER the variable system is initialized and
opal's MCA variables have been registered. opal_net_init uses a
variable registered by opal_register_params!
- do not leak ompi_mpi_main_thread when it is allocated by
MPI_T_init_thread.
- do not overwrite ompi_mpi_main_thread if it is already set (by
MPI_T_init_thread).
- mca_base_var: read_files was overwritting mca_base_var_file_list
even if it was non-NULL.
- mca_base_var: set all file global variables to initial states on
finalize.
- btl/vader: decrement enumerator reference count to ensure that it
is freed.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
call the opal_common_verbs_mca_register function to make sure that
opal_common_verbs_want_fork_support mca parameter is created and therefore
can be used to control the fork support.
1. Fixes according to (http://www.open-mpi.org/community/lists/devel/2014/09/15869.php)
2. Force mpisync:rank0 to gather results. Now sync info is written by rank0 to the output file.
3. Improve mpirun_prof: 1) adopt to the environment (SLURM/TORQUE); 2) recognize some noteset-related mpirun options.
This commit was SVN r32772.
Replace our old, clunky timing setup with a much nicer one that is only available if configured with --enable-timing. Add a tool for profiling clock differences between the nodes so you can get more precise timing measurements. I'll ask Artem to update the Github wiki with full instructions on how to use this setup.
This commit was SVN r32738.
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
The semantics of the variable mpi_yield_when_idle are to call
opal_progress_set_yield_when_idle at MPI_Init. It would be difficult
to modify the old variable to support setting this parameter at
runtime. The fix is to add an additional parameter to opal:
opal_progress_yield_when_idle that directly sets the variable. This
variable is settable anytime and does not affect the semantics of
the old mpi_yield_when_idle variable.
Refs trac:193
cmr=v1.8.1:reviewer=jsquyres
This commit was SVN r31255.
The following Trac tickets were found above:
Ticket 193 --> https://svn.open-mpi.org/trac/ompi/ticket/193
In the OPAL_ENABLE_FT_CR code path there used to be a variable
'mca_base_component_distill_checkpoint_ready' which got removed.
The FT code was not compiling and while trying to get it to compile
again the old variable was #ifdef'd out. This re-introduces the
variable with a new name 'opal_base_distill_checkpoint_ready'
and enables the code previously #ifdef'd out.
This removes the last hack introduced to get the FT code to compile
again.
This commit was SVN r30928.
more:
- Remove OPAL_ENABLE_MULTI_THREADS, since it didn't really do anything
correctly. Opal always has threads enabled at this point.
- Remove OMPI_ENABLE_PROGRESS_THREADS, since this hasn't worked in
8 years and it has performance issues we'll never be able to
overcome. Note that we have plans for re-adding async progress, using
a hybrid protocol of async and sync sends.
- OMPI_ENABLE_THREAD_MULTIPLE now determines whether the thread lock
macros do the check or not.
- Condition variables are ALWAYS polling right now, which fixes the thread
live-lock currently found when THREAD_MULTIPLE is turned on.
This commit was SVN r29891.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
* Remove paffinity, maffinity, and carto frameworks -- they've been
wholly replaced by hwloc.
* Move ompi_mpi_init() affinity-setting/checking code down to ORTE.
* Update sm, smcuda, wv, and openib components to no longer use carto.
Instead, use hwloc data. There are still optimizations possible in
the sm/smcuda BTLs (i.e., making multiple mpools). Also, the old
carto-based code found out how many NUMA nodes were ''available''
-- not how many were used ''in this job''. The new hwloc-using
code computes the same value -- it was not updated to calculate how
many NUMA nodes are used ''by this job.''
* Note that I cannot compile the smcuda and wv BTLs -- I ''think''
they're right, but they need to be verified by their owners.
* The openib component now does a bunch of stuff to figure out where
"near" OpenFabrics devices are. '''THIS IS A CHANGE IN DEFAULT
BEHAVIOR!!''' and still needs to be verified by OpenFabrics vendors
(I do not have a NUMA machine with an OpenFabrics device that is a
non-uniform distance from multiple different NUMA nodes).
* Completely rewrite the OMPI_Affinity_str() routine from the
"affinity" mpiext extension. This extension now understands
hyperthreads; the output format of it has changed a bit to reflect
this new information.
* Bunches of minor changes around the code base to update names/types
from maffinity/paffinity-based names to hwloc-based names.
* Add some helper functions into the hwloc base, mainly having to do
with the fact that we have the hwloc data reporting ''all''
topology information, but sometimes you really only want the
(online | available) data.
This commit was SVN r26391.
No need for it to be in the base (we mistakenly thought it was used in
multiple shmem components).
This commit was SVN r25662.
The following SVN revision numbers were found above:
r25652 --> open-mpi/ompi@7e223b5799
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
anything for non-MPI apps. Oops! (But before you freak out, gentle
reader, note that mpi_paffinity_alone for MPI apps still worked fine)
When we made the switchover somewhere in the 1.3 series to have the
orted's do processor binding, then stuff like:
mpirun --mca mpi_paffinity_alone 1 hostname
should have bound hostname to processor 0. But it didn't because of a
subtle startup ordering issue: the MCA param registration for
opal_paffinity_alone was in the paffinity base (vs. being in
opal/runtime/opal_params.c), but it didn't actually get registered
until after the global variable opal_paffinity_alone was checked to
see if we wanted old-style affinity bindings. Oops.
However, for MPI apps, even though the orted didn't do the binding,
ompi_mpi_init() would notice that opal_paffinity_alone was set, yet
the process didn't seem to be bound. So the MPI process would bind
itself (this was done to support the running-without-orteds
scenarios). Hence, MPI apps still obeyed mpi_paffinity_alone
semantics.
But note that the error described above caused the new mpirun switch
--report-bindings to not work with mpi_paffinity_alone=1, meaning that
the orted would not report the bindings when mpi_paffinity_alone was
set to 1 (it ''did'' correctly report bindings if you used
--bind-to-core or one of the other binding options).
This commit separates out the paffinity base MCA param registration
into a small function that can be called at the Right place during the
startup sequence.
This commit was SVN r22602.
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
1. Probe the signal number that we want
1. If a handler is already installed there:
1. if the opal_signal MCA param entry for this signal is suffixed
with ":complain", then output a show_help message
1. do not install our signal handler
1. otherwise, install our signal handler
Hence, we've shifted to a policy of only complaining if the user asks
us to complain.
This commit was SVN r20969.
The following Trac tickets were found above:
Ticket 1871 --> https://svn.open-mpi.org/trac/ompi/ticket/1871
1. minor modification to include two new opal MCA params:
(a) opal_profile: outputs what components were selected by each framework
currently enabled for most, but not all, frameworks
(b) opal_profile_file: name of file that contains profile info required
for modex
2. introduction of two new tools:
(a) ompi-probe: MPI process that simply calls MPI_Init/Finalize with
opal_profile set. Also reports back the rml IP address for all
interfaces on the node
(b) ompi-profiler: uses ompi-probe to create the profile_file, also
reports out a summary of what framework components are actually
being used to help with configuration options
3. modification of the grpcomm basic component to utilize the
profile file in place of the modex where possible
4. modification of orterun so it properly sees opal mca params and
handles opal_profile correctly to ensure we don't get its profile
5. similar mod to orted as for orterun
6. addition of new test that calls orte_init followed by calls to
grpcomm.barrier
This is all completely benign unless actively selected. At the moment, it only supports modex-less launch for openib-based systems. Minor mod to the TCP btl would be required to enable it as well, if people are interested. Similarly, anyone interested in enabling other BTL's for modex-less operation should let me know and I'll give you the magic details.
This seems to significantly improve scalability provided the file can be locally located on the nodes. I'm looking at an alternative means of disseminating the info (perhaps in launch message) as an option for removing that constraint.
This commit was SVN r20098.
Short version: remove opal_paffinity_alone and restore
mpi_paffinity_alone. ORTE makes various information available for the
MPI layer to decide what it wants to do in terms of processor
affinity.
Details:
* remove opal_paffinity_alone MCA param; restore mpi_paffinity_alone
MCA param
* move opal_paffinity_slot_list param registration to paffinity base
* ompi_mpi_init() calls opal_paffinity_base_slot_list_set(); if that
succeeds use that. If no slot list was set, see if
mpi_paffinity_alone was set. If so, bind this process to its Node
Local Rank (NLR). The NLR is the ORTE-maintained slot ID; if you
COMM_SPAWN to a host in this ORTE universe that already has procs
on it, the NLR for the new job will start at N (not 0). So this is
slightly better than mpi_paffinity_alone in the v1.2 series.
* If a slot list is specified *and* mpi_paffinity_alone is set, we
display an error and abort.
* Remove calls from rmaps/rank_file component to register and lookup
opal_paffinity mca params.
* Remove code in orte/odls that set affinities - instead, have them
just pass a slot_list if it exists.
* Cleanup the orte/odls code that determined
oversubscribed/want_processor as these were just opposites of each
other.
This commit was SVN r18874.
The following Trac tickets were found above:
Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
1. applied prefix rule to functions and variables of RMAPS rank_file component
2. cleaned ompi_mpi_init.c from paffinity code
3. paffinity code moved to new opal/mca/paffinity/base/paffinity_base_service.c file
4. added opal_paffinity_slot_list mca parameter
This commit was SVN r18019.
single threaded builds. In its default configuration, all this does
is ensure that there's at least a good chance of threads building
based on non-threaded development (since the variable names will be
checked). There is also code to make sure that a "mutex" is never
"double locked" when using the conditional macro mutex operations.
This is off by default because there are a number of places in both
ORTE and OMPI where this alarm spews mega bytes of errors on a
simple test. So we have some work to do on our path towards
thread support.
Also removed the macro versions of the non-conditional thread locks,
as the only places they were used, the author of the code intended
to use the conditional thread locks. So now you have upper-case
macros for conditional thread locks and lowercase functions for
non-conditional locks. Simple, right? :).
This commit was SVN r15011.
the same time, remove some of the MPI-related options from OPAL:
- provide mechanism to change at runtime whether sched_yield() should
be called when the progress engine is idle
- provide mechanism for changing the rate at which the event engine
is called when there are "no" users of the event engine (ie, when
using MPI but not TCP)
- fix some function names in the progress engine to better match
their intended use (and remove MPI naming scheme)
- remove progress_mpi_enable / progress_mpi_disable because
we can now use the functions to set the sched_yield and
tick rate interfaces
- rename opal_progress_events() to opal_progress_set_event_flag()
because the first really isn't descriptive of what the function
does and I always got confused by it
This commit was SVN r12645.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
