(http://www.stafford.uklinux.net/libesmtp/) via the --with-esmtp(=DIR)
configure option. Several MCA parameters must be set in order to use
this component:
* notifier_smtp_server: SMTP server IP address or name; must be supplied
* notifier_smtp_port: port to talk to on the server; defaults to 25
* notifier_smtp_to: comma-delimited list of email addresses to send
the mail to; must be supplied
* notifier_smtp_from_name: free-form "name" who the mail is from;
defaults to "Open MPI Notifier"
* notifier_smtp_from_addr: email address from the mail is from; must
be supplied
* notifier_smtp_subject: subject of the mail; defaults to "Open MPI
notifier"
* notifier_smtp_body_prefix: prefix of the body of the mail; defaults
to a sensible value
* notifier_smtp_body_suffix: suffix of the body of the mail; defaults
to a sensible value
Also libesmtp supports SMTP AUTH protocols, this component does not.
If people want/need those kinds of features, they're relatively easy
to add -- I just didn't bother [yet] before I knew if anyone cared.
This commit was SVN r20749.
Adapt orte_process_info to orte_proc_info, and
change orte_proc_info() to orte_proc_info_init().
- Compiled on linux-x86-64
- Discussed with Ralph
This commit was SVN r20739.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
Correct an error wrt how jobids were being computed. Needed to ensure that the job family field was not overrun as we increment jobids for comm_spawn.
Update the slurm plm module so it uses the new slurm termination procedure (brings trunk back into alignment with 1.3 branch).
Update the slurmd ess component so it doesn't get selected if we are running a singleton inside of a slurm allocation.
Cleanup HNP init by moving some code that had been in orte_globals.c for historical reasons into the ess hnp module, and removing the call to that code from the ess_base_std_prolog
NOTE: this change allows orte to support an infinite aggregate number of comm_spawn's, with up to 64k being alive at any one instant. HOWEVER, the MPI layer currently does -not- support re-use of jobids. I did some prototype coding to revise the ompi_proc_t structures, but the BTLs are caching their own data, and there was no readily apparent way to update it. Thus, attempts to spawn more than the 64k limit will abort to avoid causing the MPI layer to hang.
This commit was SVN r20700.
a notifier module.
The Notifier framework was extended slightly to
convey more information about each event notice.
This works with the FTB v0.5 API.
To compile with FTB support, use --with-ftb=/path/to/ftb/install
CIFTS == Coordinated Infrastructure for Fault Tolerant Systems
FTB == Fault Tolerance Backplane
see http://wiki.mcs.anl.gov/cifts/index.php
This commit was SVN r20655.
Headers should be included in the .c directly.
This commit was SVN r20645.
The following SVN revision numbers were found above:
r20643 --> open-mpi/ompi@e46c512ee7
anyhow -- if oob functionality is neededm then orte/mca/oob/oob.h
Nevertheless compiles fine with -Wimplicit-function-declaration
This commit was SVN r20641.
Only proc_info.h-internal include file is opal/dss/dss_types.h
- In one case (orte/util/hnp_contact.c) had to add proc_info.h again.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
works fine, no errors.
Again, let's have MTT the last word.
This commit was SVN r20631.
Note: this requires that nodes not be shared by jobs/users. SLURM developers are working on an enhancement to remove this constraint.
Note 2: yes, the direct routed module returned! However, it is vastly different than the old one and has zero support for such things as comm_spawn. It is solely to support non-daemon, direct-launch environments.
This commit was SVN r20601.
Note that this assumes non-shared nodes...but only takes affect if there is no prior knowledge of how to talk to the specified peer. Thus, all daemon-based environments are unaffected.
This commit was SVN r20598.
Also create mca parameter to force daemonization (previous
behavior) which might be needed on larger clusters or
to make use of the -notify flag with qsub.
This fixes trac:1783.
This commit was SVN r20582.
The following Trac tickets were found above:
Ticket 1783 --> https://svn.open-mpi.org/trac/ompi/ticket/1783
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
The prior ompi_proc_t structure had a uint8_t flag field in it, where only one
bit was used to flag that a proc was "local". In that context, "local" was
constrained to mean "local to this node".
This commit provides a greater degree of granularity on the term "local", to include tests
to see if the proc is on the same socket, PC board, node, switch, CU (computing
unit), and cluster.
Add #define's to designate which bits stand for which local condition. This
was added to the OPAL layer to avoid conflicting with the proposed movement of
the BTLs. To make it easier to use, a set of macros have been defined - e.g.,
OPAL_PROC_ON_LOCAL_SOCKET - that test the specific bit. These can be used in
the code base to clearly indicate which sense of locality is being considered.
All locations in the code base that looked at the current proc_t field have
been changed to use the new macros.
Also modify the orte_ess modules so that each returns a uint8_t (to match the
ompi_proc_t field) that contains a complete description of the locality of this
proc. Obviously, not all environments will be capable of providing such detailed
info. Thus, getting a "false" from a test for "on_local_socket" may simply
indicate a lack of knowledge.
This commit was SVN r20496.
Correct the orte-show-help file when a rank is out of bounds, and do that test where a wildcard doesn't get incorrectly flagged as out-of-bounds.
This commit was SVN r20398.
1. fix a race condition whereby a proc's output could trigger an event prior to the other outputs being setup, thus c ausing the IOF to declare the proc "terminated" too early. This was really rare, but could happen.
2. add a new "timestamp-output" option that timestamp's each line of output
3. add a new "output-filename" option that redirects each proc's output to a separate rank-named file.
4. add a new "xterm" option that redirects the output of the specified ranks to a separate xterm window.
This commit was SVN r20392.
SIGCONT to the a.outs. By default, they are not forwarded and
the behavior remains as it has always been. However, if one
runs with --mca orte_forward_job_control 1, then mpirun will
catch those two signals and forward them to the orteds which
will deliver them to the a.outs. We have had requests for
this feature.
This commit was SVN r20391.
y combination of comma-separated values and ranges. Daemons will use the first port in the range, MPI procs will use the other ports in the range assuming that they know their node rank in time and enough ports were specified.
NOTE: this capability only works under specific conditions. I will outline more about this in a note to devel as the remainder of the implementation progresses. For now, the only environment where this works is slurm. The linear routed module has also been adjusted to work with static ports so that all messaging flows strictly through the topology, including the initial daemon callback - thus limiting the number of sockets opened by mpirun.
This commit was SVN r20390.
If the --wdir option is given, check to see if the user provided a relative path. If so, convert it to an absolute path. This is needed to maintain consistent behavior across environements. Some environments automatically chdir to your current working directory when launching the remote orted, while others (e.g., ssh) don't. This levels the playing field and reduces user surprise.
This commit was SVN r20342.
Reverted r20306 since the fix caused 100% failues on our !BigRed system.
See the comments on ticket #1763 for the details.
This commit was SVN r20339.
The following SVN revision numbers were found above:
r20306 --> open-mpi/ompi@8c87e48721
The following Trac tickets were found above:
Ticket 1763 --> https://svn.open-mpi.org/trac/ompi/ticket/1763
* Improved the error propagation from a backend orted
* Fixed a hang in orterun due to failed files transferred
* Fix the movement of files with relative path names
* Improved error messages when a file cannot be moved
* Move file checks to FileM instead of embedding then in the ODLS
This commit Refs trac:1770
This commit was SVN r20331.
The following Trac tickets were found above:
Ticket 1770 --> https://svn.open-mpi.org/trac/ompi/ticket/1770
The problem was eventually traced to two bugs in the code:
1. the orted wasn't resetting the write event flag, thus preventing itself from turning it on again.
2. the HNP needed to check if the stdin was attached to tty or not before adding the delay for fairness. If it is attached to a tty, there is no need for the delay. This prevents some strangely slow typing response.
This patch needs to move to 1.3
This commit was SVN r20246.
Error output strings were changed to be unique per code site.
They are still pretty meaningless to the user, but at least now
developers might be able to find which unique place in the code
reported which error.
This commit was SVN r20238.
Consolidate the nid/pid lookup code with the rest of the nid/pid code so that changes are easier to track. Add the ability to send cluster profile info as part of the nidmap. Cleanup the setup and teardown of the new global nidmap and pidmap objects.
This commit was SVN r20219.
Also, per chat with Jeff, modified the Makefile.am's of a few orte tools so that they were consistent in the way we generate the ompi-equivalent cmds.
This commit was SVN r20165.
changes to the already existing ccp components
event/win32.c: merge old FD handling into new
opal_installdirs_windows.c:fix the registry handling
This commit was SVN r20109.
Basically, the remaining problem turned out to be:
1. closing stdout/stderr during orte_finalize of mpirun
2. inadvertently setting up a write event on fd = -1
3. devising a scheme to more accurately track when the stdin write event was active vs closed so it only got released once
This passed prelim MTT testing by Jeff and Tim, but should soak for awhile before migrating to 1.3.
This commit was SVN r20106.
The following SVN revision numbers were found above:
r20064 --> open-mpi/ompi@a07660aea8
r20068 --> open-mpi/ompi@ec930d14a9
r20074 --> open-mpi/ompi@2940309613
It is a small launch performance improvement as now we relay the launch cmd across to the next daemon before taking the time to launch our own local procs. Still, it does allow more parallel operations during the launch procedure.
This commit was SVN r20104.
1. minor modification to include two new opal MCA params:
(a) opal_profile: outputs what components were selected by each framework
currently enabled for most, but not all, frameworks
(b) opal_profile_file: name of file that contains profile info required
for modex
2. introduction of two new tools:
(a) ompi-probe: MPI process that simply calls MPI_Init/Finalize with
opal_profile set. Also reports back the rml IP address for all
interfaces on the node
(b) ompi-profiler: uses ompi-probe to create the profile_file, also
reports out a summary of what framework components are actually
being used to help with configuration options
3. modification of the grpcomm basic component to utilize the
profile file in place of the modex where possible
4. modification of orterun so it properly sees opal mca params and
handles opal_profile correctly to ensure we don't get its profile
5. similar mod to orted as for orterun
6. addition of new test that calls orte_init followed by calls to
grpcomm.barrier
This is all completely benign unless actively selected. At the moment, it only supports modex-less launch for openib-based systems. Minor mod to the TCP btl would be required to enable it as well, if people are interested. Similarly, anyone interested in enabling other BTL's for modex-less operation should let me know and I'll give you the magic details.
This seems to significantly improve scalability provided the file can be locally located on the nodes. I'm looking at an alternative means of disseminating the info (perhaps in launch message) as an option for removing that constraint.
This commit was SVN r20098.
1. a direct callback from waitpid - this set the waitpid_fired flag
2. a notify event callback from the IOF - this set the iof complete flag
3. a message via the daemon cmd processor from the proc "de-registering" the sync, thus indicating it was going through MPI_Finalize.
The problem is that these could overlap, with the first two allowing the orted to declare the proc complete before the daemon had responded to #3.
This change forces all three events to flow through the daemon cmd processor, thus ensuring an ordered handling. I'm not certain this will solve the problem, but will await further MTT reports to see. Unfortunately, the problem doesn't show up on any manual or script-based tests I have been able to run, even when I duplicate the exact cmd that fails under MTT.
This commit was SVN r20074.
1. coordination of job completion notification to include a requirement for both waitpid detection AND notification that all iof pipes have been closed by the app
2. change of all IOF read and write events to be non-persistent so they can properly be shutdown and restarted only when required
3. addition of a delay (currently set to 10ms) before restarting the stdin read event. This was required to ensure that the stdout, stderr, and stddiag read events had an opportunity to be serviced in scenarios where large files are attached to stdin.
This commit was SVN r20064.
This seems to fix the segv seen on process restart.
This commit was SVN r20051.
The following SVN revision numbers were found above:
r20022 --> open-mpi/ompi@9a57db4a81
This commit does that by ensuring that daemons retain knowledge of proc location for all procs in their job family. It required a minor change to the ESS API to allow the daemons to update their pidmaps as data was received. In addition, the routed modules have been updated to take advantage of the newly available info, and the encode/decode pidmap utilities have been updated to communicate the required info in the launch message.
This commit was SVN r20022.
The slurm plm fork/exec's a call to srun to launch its daemons. When mpirun terminates, it then sends out a "terminate" command to those daemons. The daemons respond back to mpirun, and then exit.
If slurm itself is running on a slow network, and mpirun is running the OOB across a fast network, then it is possible for mpirun to receive notification of daemon termination and exit -before- the srun can complete its bookkeeping and declare the job as complete. When this happens, slurm becomes confused and loses state.
Mucho bad. :-/
This commit changes the termination logic so that mpirun will wait for srun to report complete before exiting. It also enables fully routed communications since it no longer requires daemons to report back that they are terminating, thus allowing the daemons to terminate asynchronously (thereby breaking routing paths).
This commit was SVN r20018.
1. modify the iof to track when a proc actually closes all of its open iof output pipes. When this occurs, notify the odls that the proc's iof is complete. This is done via a zero-time event so that we can step out of the read event before processing the notification.
2. in the odls, modify the waitpid callback so it only flags that it was called. Add a function to receive the iof-complete notification, and a function that checks for both iof complete and waitpid callback before declaring a proc fully terminated. This ensures that we read and deliver -all- of the IO prior to declaring the job complete.
Also modified the odls call to orte_iof.close (and the component's implementation) so it only closes stdin, leaving the other io channels alone. This fixes the other half of the known problem.
This should fix the ticket on this subject, but I'll wait to close it pending further testing in the trunk.
This commit was SVN r19991.
This will sit in trunk for a few days - would like to actually see some errors reported to syslog before moving the code to 1.3
This commit was SVN r19986.
It does not look like this effects the v1.3 branch since r19866 has not moved to the release branch.
Thanks to Leonardo Fialho for reporting this and supplying a patch.
This commit was SVN r19961.
The following SVN revision numbers were found above:
r19866 --> open-mpi/ompi@f54fda489e
1. register "mpi_preconnect_all" as a deprecated synonym for "mpi_preconnect_mpi"
2. remove "mpi_preconnect_oob" and "mpi_preconnect_oob_simultaneous" as these are no longer valid.
3. remove the routed framework's "warmup_routes" API. With the removal of the direct routed component, this function at best only wasted communications. The daemon routes are completely "warmed up" during launch, so having MPI procs order the sending of additional messages is simply wasteful.
4. remove the call to orte_routed.warmup_routes from MPI_Init. This was the only place it was used anyway.
The FAQs will be updated to reflect this changed situation, and a CMR filed to move this to the 1.3 branch.
This commit was SVN r19933.
* fix an if condition so that we do the right thing when procs local to mpirun output to stderr
* ensure that tools can handle relays of 0-byte output, indicating that a process closed that io channel
This commit was SVN r19884.
The problem was that we close the same fd twice, and that meantime the fd could have been reassigned
to some other file or socket.
This commit was SVN r19869.
1. remove direct routed module (hooray!)
2. add radix tree routed module (binomial remains default)
3. remove duplicate data storage - orteds were storing nidmap and pidmap data in odls, everyone else in ess
4. add ess APIs to update nidmap, add new pidmap - used only by orteds for MPI-2 support
5. modify code to eliminate multiple calls to orte_routed.update_route that recreated info already in ess pidmap. Add ess API to lookup that info instead. Modify routed modules to utilize that capability
6. setup new ability to shutdown orteds without sending back an "ack" message to mpirun - not utilized yet, will require some changes to plm terminate_orteds functions in managed environments (coming soon)
Initial tests indicating that fully routing comm via defined routing trees may not actually have a significant cost for operations like IB QP setup. More tests required to confirm.
This will require an autogen...
This commit was SVN r19866.
Without this patch, doing spawn in a loop ended up by exhausting all
available file descriptors pretty quickly. There were about 5 file
descriptors opened per spawned process. Now the number of file
descriptors managed by the process (orted or HNP)
is a lot smaller.
This commit was SVN r19864.
Modify read_write test to allow specification of rank to read stdin.
IOF now validated to work for arbitrary rank as stdin target. Not validate to work for multiple simultaneous ranks reading stdin (untested).
This commit was SVN r19804.
1. remove some stale files that were overlooked in original commit
2. add a test program and data to stress iof for stdin
3. cleanup a debug statement that caused memory corruption when reading large files
4. some minor cleanups to correctly handle xon/xoff scenarios
This commit was SVN r19792.
1. completely and cleanly separates responsibilities between the HNP, orted, and tool components.
2. removes all wireup messaging during launch and shutdown.
3. maintains flow control for stdin to avoid large-scale consumption of memory by orteds when large input files are forwarded. This is done using an xon/xoff protocol.
4. enables specification of stdin recipients on the mpirun cmd line. Allowed options include rank, "all", or "none". Default is rank 0.
5. creates a new MPI_Info key "ompi_stdin_target" that supports the above options for child jobs. Default is "none".
6. adds a new tool "orte-iof" that can connect to a running mpirun and display the output. Cmd line options allow selection of any combination of stdout, stderr, and stddiag. Default is stdout.
7. adds a new mpirun and orte-iof cmd line option "tag-output" that will tag each line of output with process name and stream ident. For example, "[1,0]<stdout>this is output"
This is not intended for the 1.3 release as it is a major change requiring considerable soak time.
This commit was SVN r19767.
There is still a problem with OpenIB and threads (external to C/R functionality). It has been reported in Ticket #1539
Additionally:
* Fix a file cleanup bug in CRS Base.
* Fix a possible deadlock in the TCP ft_event function
* Add a mca_base_param_deregister() function to MCA base
* Add whole process checkpoint timers
* Add support for BTL: OpenIB, MX, Shared Memory
* Add support Mpool: rdma, sm
* Sundry bounds checking an cleanup in some scattered functions
This commit was SVN r19756.
The segv was caused by the fact that we don't really know which daemon failed to start (at least, in most cases), so we didn't set a pointer to the aborted proc object. All we really wanted, though, was to ensure that mpirun returned a non-zero exit status, so the fix was to simply return the default error status.
This commit was SVN r19754.
This commit was SVN r19747.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r19480
- Unify the Windows and the others way of handling callbacks. Thanks to George.
- This will let Windows use the same callbacks as Linux does, which works also.
This commit was SVN r19746.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r19742
Refers to ticket #1548. Although this appears to fix the problem, the ticket will be held open pending further test prior to transition to the 1.3 branch.
This commit was SVN r19674.
thereby runs apstat twice; and in the process thereof reads the ALPS
appinfo file TWICE; and in addition, experiences a failure sometimes
which causes mpirun to hang. Change this to a looped read attempt
that breaks on success, thereby avoiding failure (except in the most
This commit was SVN r19642.
Add --display-devel-map and --display-devel-alloc to display all the detailed info we used to provide - it is only of use/interest to developers anyway and confuses users.
This commit was SVN r19608.
Cleanup when an orted actually opens the PLM. Unfortunately, some unmentionable people are pushing head node environs out to remote nodes, causing the daemons to think they are the HNP. This helps prevent the confusion.
This commit was SVN r19518.
The problem was that (outside of Odin configure issues) that the IOF is no longer enabled by application processes.
Checkpoint/restart seems to be working once again.
Thanks to Ralph for pointing me here.
This commit was SVN r19508.
rename the get_cluster_message function for both ras/plm.
use _umask instead of umask.
add WIN32_DCOM definition to support Windows Vista.
This commit was SVN r19470.
* Protect an orte variable used in the orte debugger stuff
* Initialize the datatype code in the Catamount code, as we need it
for intercommunicators (the proc code needs it to pack the remote
name)
* Turn on a bunch of the orte datatype code so that ORTE_NAME is available.
This commit was SVN r19457.
See opal/mca/paffinity/paffinity.h for explanation as to the physical vs logical nature of the params used in the API.
Fixes trac:1435
This commit was SVN r19391.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
Add a new job state to indicate that we never attempted to launch. Flag such a scenario and avoid hitting all the other error messages.
This commit was SVN r19366.
Theoretically, any PLM could use this - but in reality, all of them except rsh/ssh already leave the session attached anyway.
This fixes trac:656 - a REALLY old ticket
This commit was SVN r19294.
The following Trac tickets were found above:
Ticket 656 --> https://svn.open-mpi.org/trac/ompi/ticket/656
If a message cannot be routed because the addressee isn't yet known, then the message is held on a queue in the RML for a period of time (currently set to 500 millisec). At the end of that time, we pop the message from the list and attempt to send it again. This action requires that we convert the header back to
network-byte-order before calling the OOB.
If the message still cannot be routed, we put the message back on the list and reset the timer. However, since we are going to convert the header when it com
es off of the list, we have to ntoh it before putting it back on the list so it all comes out right. This step was missing.
Thus, the problem only showed up relatively rarely because a message would have to be pushed onto the queue at least twice for the problem to surface.
This should fix a specific ticket (1389), but we will wait to see the results of MTT runs to verify. Note that we really don't know why a message is rattling around in the RML for so long, especially since this all seems to be happening during finalize, so this could cause mpirun to hang. Or it could simply trash the message and exit cleanly. Shall be interesting to see!
This commit was SVN r19276.
Provide support for four MPIR extensions that allow specification of debugger daemon executable, argv for the debugger daemon, whether or not to forward debugger daemon IO, and whether or not debugger daemon will piggy-back on ORTE OOB network. Last is not yet implemented.
No change in behavior or operation occurs unless (a) the debugger specifically utilizes the extensions and, for co-locate while running, the user specifically enables the capability via an MCA param. Two of the MPIR extensions supported here are used in a widely-used debugger for a large-scale installation. The other two extensions are new and being utilized in prototype work by several debuggers for possible future release.
This commit was SVN r19275.
* Make the creation of the build dir for the man pages a bit more
robust (thanks to suggestions from Ralf W.).
* Only distribute the .Xin files, not the .X man pages themselves.
* Make the .X files depend on opal_config.h so that if you re-run
configure and change opal_config.h (e.g., a new version), the man
pages should get rebuilt.
* Man pages are now cleaned with "distclean", not "maintainer-clean".
* Fix a typo in opal_crs.7in.
* Udpate make_dist_tarball to update "date" in the VERSION file.
* Make make_dist_tarball a bit friendlier to hg checkouts.
This commit was SVN r19219.
- Move up the __opal_attribute_noreturn__ information
- Actually make it known outside in ess.h
- Additionally allow printf-type checking
This commit was SVN r19210.
This system is "off" by default and only operates upon specific directive for selection of a notifier component. At the moment, the only available component will write an error message to the syslog.
This commit was SVN r19209.
This needs some soak time to ensure we haven't opened any race conditions. I tried to loop everything in the shutdown procedure through that trigger event call to ensure it all goes through the one-time locks as it did before so that someone hitting ctrl-c when we are already shutting down shouldn't cause problems. Just want to let people use it for awhile to verify.
This commit was SVN r19159.
Since OMPI allows mpirun to default to the local node, and since users want to retain the option to co-locate procs with mpirun, we needed another param to block this error case.
This commit was SVN r19135.
versions, dates and build names.
Fixes trac:1387
Big thanks to Jeff and Brian for help and oversight.
This commit was SVN r19120.
The following Trac tickets were found above:
Ticket 1387 --> https://svn.open-mpi.org/trac/ompi/ticket/1387
Standardize the handling of the orte launch agent option across PLMs. This has been a consistent complaint I have received - each PLM would register its own MCA param to get input on the launch agent for remote nodes (in fact, one or two didn't, but most did). This would then get handled in various and contradictory ways.
Some PLMs would accept only a one-word input. Others accepted multi-word args such as "valgrind orted", but then some would error by putting any prefix specified on the cmd line in front of the incorrect argument.
For example, while using the rsh launcher, if you specified "valgrind orted" as your launch agent and had "--prefix foo" on you cmd line, you would attempt to execute "ssh foo/valgrind orted" - which obviously wouldn't work.
This was all -very- confusing to users, who had to know which PLM was being used so they could even set the right mca param in the first place! And since we don't warn about non-recognized or non-used mca params, half of the time they would wind up not doing what they thought they were telling us to do.
To solve this problem, we did the following:
1. removed all mca params from the individual plms for the launch agent
2. added a new mca param "orte_launch_agent" for this purpose. To further simplify for users, this comes with a new cmd line option "--launch-agent" that can take a multi-word string argument. The value of the param defaults to "orted".
3. added a PLM base function that processes the orte_launch_agent value and adds the contents to a provided argv array. This can subsequently be harvested at-will to handle multi-word values
4. modified the PLMs to use this new function. All the PLMs except for the rsh PLM required very minor change - just called the function and moved on. The rsh PLM required much larger changes as - because of the rsh/ssh cmd line limitations - we had to correctly prepend any provided prefix to the correct argv entry.
5. added a new opal_argv_join_range function that allows the caller to "join" argv entries between two specified indices
Please let me know of any problems. I tried to make this as clean as possible, but cannot compile all PLMs to ensure all is correct.
This commit was SVN r19097.
Mpirun - and the orteds - were doing their best to whack all session dirs on their nodes just in case there was something lingering due to an abnormal termination. Unfortunately, they were -too- good at it. They were whacking all session directories under the user's name, even those from other mpiruns!
This adds another layer to the session dir tree so that we can denote which jobs come from our own job family, and restricts the cleanup operation to only session dirs from within our own job family. So we'll still cleanup anything due to our own mpirun, but won't whack any other mpirun from this user.
Call it being polite...
This commit was SVN r19083.
