This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
Only proc_info.h-internal include file is opal/dss/dss_types.h
- In one case (orte/util/hnp_contact.c) had to add proc_info.h again.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
works fine, no errors.
Again, let's have MTT the last word.
This commit was SVN r20631.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
There is still a problem with OpenIB and threads (external to C/R functionality). It has been reported in Ticket #1539
Additionally:
* Fix a file cleanup bug in CRS Base.
* Fix a possible deadlock in the TCP ft_event function
* Add a mca_base_param_deregister() function to MCA base
* Add whole process checkpoint timers
* Add support for BTL: OpenIB, MX, Shared Memory
* Add support Mpool: rdma, sm
* Sundry bounds checking an cleanup in some scattered functions
This commit was SVN r19756.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
The problem was caused by a bad ordering between the restart of the ORTE level tcp connections (in the OOB - out-of-band communication) and the Open MPI level tcp connections (BTLs). Before this commit ORTE would shutdown and restart the OOB completely before the OMPI level restarted its tcp connections. What would happen is that a socket descriptor used by the OMPI level on checkpoint was assigned to the ORTE level on restart. But the OMPI level had no knowledge that the socket descriptor it was previously using has been recycled so it closed it on restart. This caused the ORTE level to break as the newly created socket descriptor was closed without its knowledge.
The fix is to have the OMPI level shutdown tcp connections, allow the ORTE level to restart, and then allow the OMPi level to restart its connections. This seems obvious, and I'm surprised that this bug has not cropped up sooner. I'm confident that this specific problem has been fixed with this commit.
Thanks to Eric Roman and Tamer El Sayed for their help in identifying this problem, and patience while I was fixing it.
* Add a new state {{{OPAL_CRS_RESTART_PRE}}}. This state identifies when we are on the down slope of the INC (finalize-like) which is useful when you want to close, but not reopen a component set for fear of interfering with a lower level.
* Use this new state in OMPI level coordination. Here we want to make sure to play well with both the OMPI/BTL/TCP and ORTE/OOB/TCP components.
* Update ft_event functions in PML and BML to handle the new restart state.
* Add an additional flag to the error output in OOB/TCP so we can see what the socket descriptor was on failure as this can be helpful in debugging.
This commit was SVN r18276.
Only one place used the user name field - session_dir, when formulating the name of the top-level directory. Accordingly, the code for getting the user's id has been moved to the session_dir code.
This commit was SVN r17926.
* Extension to the ESS framework to support C/R
* Fixed support for {{{snapc_base_establish_global_snapshot_dir}}}
* Fixed FileM support
* Misc. minor code modifications
There are some outstanding visability issues that I want to fix next.
This commit was SVN r17725.
(sometimes after the merge with the ORTE branch), the opal_pointer_array
will became the only pointer_array implementation (the orte_pointer_array
will be removed).
This commit was SVN r17007.
The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component.
This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done:
As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in.
In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in.
The incoming changes revamp these procedures in three ways:
1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step.
The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic.
Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure.
2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed.
The size of this data has been reduced in three ways:
(a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes.
To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose.
(b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction.
(c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using.
While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly.
3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup.
It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging.
Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future.
There are a few minor additional changes in the commit that I'll just note in passing:
* propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details.
* requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details.
* cleanup of some stale header files
This commit was SVN r16364.
used at nce (up to one unique collective module per collective function).
Matches r15795:15921 of the tmp/bwb-coll-select branch
This commit was SVN r15924.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15795
r15921
Fix for memory corruption in the restarted process stack. This stemed from
the brute force method we were previously using. This commit fixes this by
using a lighter weight solution focused in the r2 BML instead of above the PML.
This is a more efficient and flexible solution, and it solves the original
problem.
In the process I pulled out the ft_event function in the tcp BTL and r2 BML
into a set of *_ft.[c|h] files just to keep any updates to these code paths
as isolated as possible to make merging easier on everyone.
This commit was SVN r14371.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
The following Trac tickets were found above:
Ticket 977 --> https://svn.open-mpi.org/trac/ompi/ticket/977
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
