* Resolves#3705
* Components should link against the project level library to better
support `dlopen` with `RTLD_LOCAL`.
* Extend the `mca_FRAMEWORK_COMPONENT_la_LIBADD` in the `Makefile.am`
with the appropriate project level library:
```
MCA components in ompi/
$(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
MCA components in orte/
$(top_builddir)/orte/lib@ORTE_LIB_PREFIX@open-rte.la
MCA components in opal/
$(top_builddir)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
MCA components in oshmem/
$(top_builddir)/oshmem/liboshmem.la"
```
Note: The changes in this commit were automated by the script in
the commit that proceeds it with the `libadd_mca_comp_update.py`
script. Some components were not included in this change because
they are statically built only.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
This commit rewrites both the mpool and rcache frameworks. Summary of
changes:
- Before this change a significant portion of the rcache
functionality lived in mpool components. This meant that it was
impossible to add a new memory pool to use with rdma networks
(ugni, openib, etc) without duplicating the functionality of an
existing mpool component. All the registration functionality has
been removed from the mpool and placed in the rcache framework.
- All registration cache mpools components (udreg, grdma, gpusm,
rgpusm) have been changed to rcache components. rcaches are
allocated and released in the same way mpool components were.
- It is now valid to pass NULL as the resources argument when
creating an rcache. At this time the gpusm and rgpusm components
support this. All other rcache components require non-NULL
resources.
- A new mpool component has been added: hugepage. This component
supports huge page allocations on linux.
- Memory pools are now allocated using "hints". Each mpool component
is queried with the hints and returns a priority. The current hints
supported are NULL (uses posix_memalign/malloc), page_size=x (huge
page mpool), and mpool=x.
- The sm mpool has been moved to common/sm. This reflects that the sm
mpool is specialized and not meant for any general
allocations. This mpool may be moved back into the mpool framework
if there is any objection.
- The opal_free_list_init arguments have been updated. The unused0
argument is not used to pass in the registration cache module. The
mpool registration flags are now rcache registration flags.
- All components have been updated to make use of the new framework
interfaces.
As this commit makes significant changes to both the mpool and rcache
frameworks both versions have been bumped to 3.0.0.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The mca_base_select function uses returned priorities to select the
best component/module. This priority may be of use to the caller so
pass that information back in an optional argument. If the priority is
not needed pass NULL.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
CID 70630 Dereference before null check
Cleaned up useless goto statements and deleted NULL check. If
mca_base_select returns success than best_module and best_component
will always be non-NULL.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for project_framework_component_* parameter
matching. This is the first step in allowing the same framework name
in multiple projects. This change also bumps the MCA component version
to 2.1.0.
All master frameworks have been updated to use the new component
versioning macro. An mca.h has been added to each project to add a
project specific versioning macro of the form
PROJECT_MCA_VERSION_2_1_0.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Enabling the FT code breaks compilation (again). This series
tries to fix the compiler errors. This is again only fixing
the compiler errors without any warranty that the result
might actually support FT again.
Follow-up of 552c9ca5a0. This patch
implements the necessary changes in mentioned commit in the FT code.
Enabling the FT code breaks compilation (again). This series
tries to fix the compiler errors. This is again only fixing
the compiler errors without any warranty that the result
might actually support FT again.
The FT code used barrier mechanisms which have been removed
with aec5cd08bd. This patch replaces
all those different barriers with opal_pmix.fence(NULL, 0);
I am not sure this is completely correct but at least a starting
point for a review.
Enabling the FT code breaks compilation (again). This series
tries to fix the compiler errors. This is again only fixing
the compiler errors without any warranty that the result
might actually support FT again.
This first patch moves orte_cr_continue_like_restart from ORTE
to opal_cr_continue_like_restart in OPAL. This only leaves three
calls from OPAL to ORTE in the FT code. As it is not yet 100%
clear how to handle these calls the code orte_sstore.set_attr()
has been #ifdef'd out for now.
Use of the old ompi_free_list_t and ompi_free_list_item_t is
deprecated. These classes will be removed in a future commit.
This commit updates the entire code base to use opal_free_list_t and
opal_free_list_item_t.
Notes:
OMPI_FREE_LIST_*_MT -> opal_free_list_* (uses opal_using_threads ())
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
Also, since I put some of the macros for these silent/verbose rules up
in the top-level Makefile.man-page-rules file, I renamed it to
Makefile.ompi-rules.
I've had this sitting around for a while; now seems like as good a
time as any to commit it.
This commit was SVN r31271.
During the commits to make the C/R code compile again the
blocking receive calls were replaced by non-blocking
which broke the code. This patch uses ORTE_WAIT_FOR_COMPLETION()
to wait until the non-blocking calls have finished.
This commit was SVN r30486.
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
This patch changes all send/send_buffer occurrences in the C/R code
to send_nb/send_buffer_nb.
The new code compiles but does not work.
Changes from V1:
* #ifdef out the code (so it is preserved for later re-design)
* marked the broken C/R code with ENABLE_FT_FIXED
Changes from V2:
* just replace the blocking calls with the non-blocking calls
* all #ifdef's introduced in V1 are gone
* send_* returns error code or ORTE_SUCCESS (not the number of bytes)
This commit was SVN r30036.
This patch changes all recv/recv_buffer occurrences in the C/R code
to recv_nb/recv_buffer_nb.
The old code is still there but disabled using ifdefs (ENABLE_FT_FIXED).
The new code compiles but does not work.
Changes from V1:
* #ifdef out the code (so it is preserved for later re-design)
* marked the broken C/R code with ENABLE_FT_FIXED
Changes from V2:
* only #ifdef out the code where the behaviour is changed
(used to be blocking; now non-blocking)
This commit was SVN r30035.
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
value to signal that the operation of retrieving the element from the free list
failed. However in this case the returned pointer was set to NULL as well, so the
error code was redundant. Moreover, this was a continuous source of warnings when
the picky mode is on.
The attached parch remove the rc argument from the OMPI_FREE_LIST_GET and
OMPI_FREE_LIST_WAIT macros, and change to check if the item is NULL instead of
using the return code.
This commit was SVN r28722.
Notes:
- This commit also eliminates the need for an available components list in use
in several frameworks. None of the code in question was making use of the
priority field of the priority component list item so these extra lists were
removed.
- Cleaned up selection code in several frameworks to sort lists using opal_list_sort.
- Cleans up the ompi/orte-info functions. Expose the functions that construct the
list of params so they can be used elsewhere.
patches for mtl/portals4 from brian
missed a few output variables in openib
This commit was SVN r28241.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
Reasoning: The old behavior was a little confusing. mca_base_components_open does not open an output stream so it is a little unexpected that mca_base_components_close does. To add to this several frameworks (that don't use mca_base_components_close) failed to close their output in the framework close function and others closed their output a second time. This change is an improvement to the symantics of mca_base_components_open/close as they are now symetric in their functionality.
This commit was SVN r27570.
- fix the Fortran layer to use new macros to convert Fortran-to-C status
- change the C internals to pull out old OMPI_SET_STATUS* macros
Also, change name of "status" argument in topo_test_f.c to "topo_type".
This commit was SVN r27403.
Among other things, this patch deals with the following issues:
* fix ompi-checkpoint argument parsing
* ompi-restart -showme prints an extraneous "Restarted child with PID"
message. Move around the debug statement to avoid this.
* fixes for the state machine changes
This commit was SVN r26770.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
Everyone will be starting at MIN anyway (until we implement restart of course)
so there's no reason to set the epoch to INVALID and then immediately reset them
to MIN. This way there's less room to make mistakes later.
This commit was SVN r24829.
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.
Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.
This commit was SVN r23966.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
