This is a fix based on a bugreport on github/mailing list from CGNS.
The core of the problem was that different processes entered different branches of
our aggregator selection logic, due to the fact that in some cases processes had
a matching file_view size and contiguous chunk size (thus assuming 1-D distribution),
and some processes did not (thus assuming 2-D distribution). The fix is to calculate
the avg. file view size across all processes and use this value, thus ensuring that
all processes enter the same branch.
Fixes issue #7809
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
(cherry picked from commit 4a8a330bba)
This is based on a bug reported on the mailing list using a netcdf testcase.
The problem occurs if processes are using a custom file view, but on some
of them it appears as if the default file view is being used. Because of that,
the simple-grouping option lead to different number of aggregators used on different
processes, and ultimately to a deadlock. This patch fixes the problem by not using
the file_view size anymore for the calculation in the simple-grouping option,
but the contiguous chunk size (which is identical on all processes).
Fixes issue #7109
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
(cherry picked from commit ad5d0df4e9)
individual read/write operations exceeding 2GB fail in ompio
due to improper conversions from size_t to int in two different
locations. This commit fixes an issue reported by Richard Warren
from the HDF5 group.
Fixes Issue #7045
Cherry-picked from commit a130f569df
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
In common_ompi_aggregators calc_cost routine:
do not cast the real division to an int intermediately.
This patch removes the obsolete int variable c and assigns
the result of the P_a/P_x division directly to n_as.
With the intermediate int c variable, n_as gets 0 if P_a < P_x,
resulting in a division by 0 when computing n_s.
Signed-off-by: Harald Klimach <harald.klimach@uni-siegen.de>
(cherry picked from commit e222a04ae5)
When using an empty fileview, a division by zero bug can occur in ompio. Not entirely sure why the problem did not show up previously, but some recent changes trigger that bug in one of our tests.
This pr is part of a fix applied in commit f6b3a0a
Fixes Issue #6703
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
Similar to #6286 rounding number of bytes into a single precision floating point value to round up the result of a division is a potential risk due to rounding errors.
- remove floating point operations for `round up`
- removes floating point conversion for round down (native behavior of integer division)
Signed-off-by: René Widera <r.widera@hzdr.de>
(cherry picked from commit a91fab80a1)
This commit fixes a problem reported on the mailing list with
individual writes larger than 512 MB.
The culprit is a floating point division of two large, close values.
Changing the datatypes from float to double (which is what is being
used in the fcoll components) fixes the problem.
See issue #6285 and
https://forum.hdfgroup.org/t/cannot-write-more-than-512-mb-in-1d/5118
Thanks for Axel Huebl and René Widera for reporting the issue.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
(cherry picked from commit c0f8ce0fff)
return MPI_ERR_ARG if the size of the fileview is not a
multiple of the size of the etype provided.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
return MPI_ERR_ACCESS if the user tries to read from a file
that was opened using MPI_MODE_WRONLY
return MPI_ERR_READ_ONLY if the user tries to write a file
that was opened using MPI_MODE_RDONLY
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
the sharedfp component has to be selected and opened before
we set the default file view during file_open. Otherwise
there is a sperious error message from the sharefp_file_seek
operation that is called during the file_set_view.
Fixes Issue #5560
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
OMPIO now uses the correct delete function depending on the fs
mca_common_ompio_file_delete now works this way instead
of calling POSIX unlink:
- create a minimal file handle with the given file name
- select the best fs component using this file handle
- call the component-specific file delete function
Signed-off-by: Gaëtan Bossu <gbossu@ddn.com>
a bug sneaked into constructing the list of aggregators
processes when using the fileview based grouping options
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
handle the situation where the user requests a non-zero amount
of data but has a zero-size fileview. My instrinct would have been
to return an error code, but according to the test that I used
it should be MPI_SUCCESS and zero bytes. It is definitely better
than segfaulting :-)
THis makes another test from the IBM testsuite pass.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
use an allocator to manage temporary buffers when copying
unmanaged data from GPU buffer to host. This is necessary,
since the buffers have to be pinned for better performance,
which is an expensive operation.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
this commit adds the initial support for cuda buffers in ompio, for blocking
and non-blocking individual read and write operations.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
add support for the info objects cb_buffer_size and collective_buffering.
Also, introduce a new mca parameter that allows to give feedback
on whether an info object is recognized (and honored).
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
this commit revamps the internal operations of the sharedfp components.
Specifically, it is focused around removing the second file_open
operation for shared file pointers. This makes the code more efficient.
Because of that, there is no necessity anymore for the sharedfp_lazy_open
mca parameter.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
in case the user opened a file using the DELETE_ON_CLOSE flag,
return the error code generated in the delete operation.
Note, that this is however just a partial fix to the e_close_1 test
from the ibm testsuite, since the object destructor that triggers
the file_close function does not have a mechanism right now to recognize
and return an error code.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
and some internal structure elements/components. Along the way,
add support for the cb_nodes Info object.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
since the request code is now being accessed also from the vulcan fcoll
component, the request code was relocated into the common/ompio
directory to avoid ld load problems.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
The files array was also storing $phase.prof. This was leading to
$phase.prof's output getting dumped into itself again and again. Updated
code to initialise files array with files other than $phase.prof.
Signed-off-by: Ninad Prabhukhanolkar <ninadchess96@gmail.com>
the ompio module resets the amode from WRONLY to RDWR in order
to accoomodate data sieving in the two-phase fcoll componet. This
leads however to an error if MPI_MODE_SEQUENTIAL has been requested
by the user, since MODE_SEQUENTIAL is incompatible with MODE_RDWR.
SInce the change to the amode was done after opening the file for
individual file pointers but before opening the file for shared filepointers,
this lead to an error message in the sharedfp component.
Note, that data sieving is never necessary if MODE_SEQUENTIAL is set,
so this should not be a problem for any scenario.
Fixes#4991
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
The osc monitoring component needed to include other OSC components
header in order to be able tu access communicator through the
component specific ompi_osc_*_module_t structures. This commit remove
the dependency, and resolve the issue #4523.
Extend the common monitoring API.
* Now it's possible to translate from local rank to world rank from
both the communicator and the group.
* Remove useless hashtable as we directly use the w_group contained
in window structure.
Add automatic generation at config time.
The templates are expanded at configure time. It creates a new header
file that generates all the variables/functions needed. Adding this
during the autogen automagicaly generates for each of the available
modules the proper functions.
Only keep a generated argv-style array.
Following Jeff's advice, the configure.m4 file generate a simple array
of module variables to be iterated over to find the proper module.
Signed-off-by: Clement Foyer <clement.foyer@inria.fr>
ompio has the unique problem, that mca parameters set in the io/ompio component
have to be accessible from other frameworks as well. This is mostly done to avoid
a replication in the parameter names and to reduce the number of mca parameters that
and end-user has to worry about.
This commit introduces a generic function to retrieve ompio mca parameters, the function pointer
is stored on the file handle. It replaces two functions that used the same concept already for
one parameter each.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
This commit renames the arithmetic atomic operations in opal to
indicate that they return the new value not the old value. This naming
differentiates these routines from new functions that return the old
value.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
ompio has historically changed the WRONLY flag provided by the applicaiton
to RDWR to allow for the data sieving optimization within the two-phase I/O
fcoll component. This change did not have a performance impact
on regular UNIX file systems, but seems to hurt performance on NFS (and maybe Lustre?)
So provide an option that allows to keep the WRONLY option, and raise an error
if tha fcoll/two-phase would actually like to use the data sieving.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
This is a bug fix based on a problem reported on the mailing list.
For very large read/write operations, ompio breaks the operation
down into multiple cycles. The problem was that
one of the variables required to maintain its values
across the different cycles did not do that, and because
of that the calculations of the memory offsets was wrong.
Fixes issue #4453
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
set proper error codes in mca_fs_ufs_file_open by mapping the errno value to
the MPI error code. Fixes an issue reported on the mailing by Wei-keng Liao
Fixes Issue #4443
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
This commit looks large, but its really mostly a cleanup step.
1. introduce proper error handling for the return values of fcntl and the fbtl_posix_lock function
2. rename a parameter to more accurately reflect what it does
3. introduce an mca parameter in the fs/ufs component that allows to control
what the level of locking the user would like to enforce
4. move the initialization of the fs_block_size parameter from fs/ufs into the
common/ompio component. An fs component might be allowed to overwrite this
value, but none of the actual fs components do that.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
the new grouping option simple+ performs all calculations used
for the aggregator selection as if the default file view would be used,
thus avoiding communication in file_set_view all together. This mode
is useful for applications that do not set a file view, but use
explicit offset operations on the default file view.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
