Per MPI-3.1:8.7.1 p361:11-13, it's valid for MPI_FINALIZED to be
invoked during an attribute destruction callback (e.g., during the
destruction of keyvals on MPI_COMM_SELF during the very beginning of
MPI_FINALIZE). In such cases, MPI_FINALIZED must return "false".
Prior to this commit, we hung in FINALIZED if it were invoked during
a COMM_SELF attribute destruction callback in FINALIZE. See
https://github.com/open-mpi/ompi/issues/5084.
This commit converts the MPI_INITIALIZED / MPI_FINALIZED
infrastructure to use a single enum (ompi_mpi_state, set atomically)
to represent the state of MPI:
- not initialized
- init started
- init completed
- finalize started
- finalize past COMM_SELF destruction
- finalize completed
The "finalize past COMM_SELF destruction" state is what allows us to
return "false" from MPI_FINALIZED before COMM_SELF has been fully
destroyed / all attribute callbacks have been invoked.
Since this state is checked at nearly every MPI API call (to see if
we're outside of the INIT/FINALIZE epoch), care was taken to use
atomics to *set* the ompi_mpi_state value in ompi_mpi_init() and
ompi_mpi_finalize(), but performance-critical code paths can simply
read the variable without needing to use a slow call to an
opal_atomic_*() function.
Thanks to @AndrewGaspar for reporting the issue.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Hostname and PID are output as a message prefix in many places in
our code. Their printf-formats were either `[%s:%d]` or `[%s:%05d]`.
This commit changes `[%s:%d]` to `[%s:%05d]`. The latter was more
widely used in our code (including OPAL output system and the signal
handler).
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
There are only five places in the non-daemon code paths where opal_hwloc_topology is currently referenced:
* shared memory BTLs (sm, smcuda). I have added a code path to those components that uses the location string
instead of the topology itself, if available, thus avoiding instantiating the topology
* openib BTL. This uses the distance matrix. At present, I haven't developed a method
for replacing that reference. Thus, this component will instantiate the topology
* usnic BTL. Uses the distance matrix.
* treematch TOPO component. Does some complex tree-based algorithm, so it will instantiate
the topology
* ess base functions. If a process is direct launched and not bound at launch, this
code attempts to bind it. Thus, procs in this scenario will instantiate the
topology
Note that instantiating the topology on complex chips such as KNL can consume
megabytes of memory.
Fix pernode binding policy
Properly handle the unbound case
Correct pointer usage
Do not free static error messages!
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
ompi_show_help, because opal_show_help is replaced with an
aggregating version when using ORTE, so there's no reason to
directly call orte_show_help.
This commit was SVN r28051.
* If something goes wrong during ompi_mpi_init, don't erroneously
report that it is illegal to invoke MPI_INIT* before MPI_INIT
* Aggregate help messages when possible when something goes wring
during ompi_mpi_init
This commit was SVN r24492.
Special-case the before MPI_INIT / after MPI_FINALIZE error messages
so that they can be a bit more clear than the general "an error
occurred" messages that are displayed in the middle of MPI jobs.
This is not really a "bug fix", but it is helpful for usability. I
leave it up to the v1.4 RM's to decide if they want it for the 1.4
series or not.
This commit was SVN r22382.
The following Trac tickets were found above:
Ticket 2158 --> https://svn.open-mpi.org/trac/ompi/ticket/2158
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
Adapt orte_process_info to orte_proc_info, and
change orte_proc_info() to orte_proc_info_init().
- Compiled on linux-x86-64
- Discussed with Ralph
This commit was SVN r20739.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
we already have them in orte_process_info. Refs trac:1523.
This commit was SVN r19615.
The following Trac tickets were found above:
Ticket 1523 --> https://svn.open-mpi.org/trac/ompi/ticket/1523
help messages so that users only see the message once instead of N
times when their MPI app crashes.
Note that there is a tradeoff here -- we now call malloc in this
particular "show the error" code path. This shouldn't usually be a
problem, because the errors typically displayed through this mechanism
are MPI API argument problems (e.g., sending a negative count to
MPI_SEND), and not memory errors. But such API argument errors could
be a consequence of of a prior memory error, so there's a nonzero
chance that the error failure will fail to print because malloc
failed. In this case, the user can disable help message aggregation
(via the orte_base_want_aggregate MCA parameter) and we'll fall back
to the no-malloc code path (but without aggregation).
Note that we won't aggregate before MPI_INIT or after MPI_FINALIZE.
So if you call an MPI function before MPI_INIT / after MPI_FINALIZE,
you'll still see the error message N times. Nothing we can do about
that; we need ORTE to do the aggregation properly (which is obviously
unavailable before MPI_INIT / after MPI_FINALIZE).
This commit was SVN r19611.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
- we have to be able to attach a string to an error class, not just to an
error code
- according to MPI-2 the attribute MPI_LASTUSEDCODE has to be updated
everytime you add a new code or a new class. Thus, you have to have single
list for both.
Thus, we got rid of the error_class structure. In the error-code structure, we
can distinguish whether we are dealing with an error code or an error class by
looking at the err->code element of the structure. In case its value is
MPI_UNDEFINED, the according entry is a class, else it is an error code. All
predefined error codes have the code and the class field set to the same
value.
The test MPI_Add_error_class1 passes now.
Fixes trac:418
This commit was SVN r12764.
The following Trac tickets were found above:
Ticket 418 --> https://svn.open-mpi.org/trac/ompi/ticket/418
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
complete, but stable enough that it will have no impact on general development,
so into the trunk it goes. Changes in this commit include:
- Remove the --with option for disabling MPI-2 onesided support. It
complicated code, and has no real reason for existing
- add a framework osc (OneSided Communication) for encapsulating
all the MPI-2 onesided functionality
- Modify the MPI interface functions for the MPI-2 onesided chapter
to properly call the underlying framework and do the required
error checking
- Created an osc component pt2pt, which is layered over the BML/BTL
for communication (although it also uses the PML for long message
transfers). Currently, all support functions, all communication
functions (Put, Get, Accumulate), and the Fence synchronization
function are implemented. The PWSC active synchronization
functions and Lock/Unlock passive synchronization functions are
still not implemented
This commit was SVN r8836.
