Without this commit, if you run IMB pingpong between two nodes with only
one usnic selected (e.g., via `--mca btl_usnic_if_include usnic_0`) then
the run will seem fine but will segfault at MPI_Finalize time.
This behavior has happened since Cisco v1.6 git commit ec7ddf8, upstream
trunk r29484, and upstream v1.7 r29507.
Root cause was that the free list element was being used as the recv
buffer instead of the data buffer associated with the element. So the
reassembly code would stomp all over the free list element, which would
cause the destructor to explode when the free list attempted to clean up
all of its elements. This surprisingly did not cause any other problems
until now.
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29593.
The following SVN revision numbers were found above:
r29484 --> open-mpi/ompi@a6ed232a10
r29507 --> open-mpi/ompi@790d269ce8
If we need to use a convertor, go back to stashing that convertor in the
frag and populating segments "on the fly" (in
ompi_btl_usnic_module_progress_sends). Previously we would pack into a
chain of chunk segments at prepare_src time, unnecessarily consuming
additional memory.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29592.
This makes it a little easier to see what's happening with callbacks to
the PML.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29591.
This includes suppressing picky-mode warnings about __VA_ARGS__, which
we know are supported by any compilers we care about.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29590.
Ensure that they never are touched by checking in their destructors.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29589.
Let imagine that we have two btls in btl_openib_component_init() both points to the same openib_btl->device and as a result have the same openib_btl->device->endpoints array.
Finalization phase calls twice mca_btl_openib_finalize()->mca_btl_openib_finalize_resources().
mca_btl_openib_finalize_resources() frees endpoint related btl. But the second call of mca_btl_openib_finalize_resources() checks endpoint that is released by previus call.
fixed by Igor, reviewed by miked/vasily
cmr=v1.7.4:reviewer=ompi-gk1.7
This commit was SVN r29563.
This commit moves all the module stats into their own struct so that
the stats only need to appear as a single line in the module_t
definition, and then moves all the logic for reporting the stats into
btl_usnic_stats.c|h.
Further, the stats are now exported as MPI_T_BIND_NO_OBJECT entities
(i.e., not bound to any particular MPI handle), and are marked as
READONLY and CONTINUOUS. They currently all default to verbose level
5 ("Application tuner / detailed", according to
https://svn.open-mpi.org/trac/ompi/wiki/MCAParamLevels).
Most of the statistics are counters, but a small number are high
watermark values. Due to how counters are reported via MPI_T, none of
the counters are exported through MPI_T if the MCA param
btl_usnic_stats_relative=1 (i.e., the module resets the stats back to
zero at a given frequency).
When MPI_T_pvar_handle_alloc() is invoked on any of these pvars, it
will return a count that is equal to the number of active usnic BTL
modules. The values returned for any given pvar (e.g.,
num_total_sends) are an array containing one value for each active
usnic BTL module. The ordering of values in the array is both
consistent across all usnic pvars and stable throughout a single job:
array slot 0 corresponds to module X, array slot 1 corresponds to
module Y, etc.
Mapping which array slot corresponds to which underlying Linux usnic_X
device works as follows:
* The btl_usnic_devices MPI_T state pvar is associated with a
btl_usnic_device MPI_T enum, and be obtained via
MPI_T_pvar_get_info().
* If all usNIC pvars are of length N, the values [0,N) in the
btl_usnic_device enum are associated with strings of the
corresponding underlying Linux device.
For exampe, to look up which Linux device is reported in all usNIC
pvars' array slot 1, look up the int value 1 in the btl_usnic_devices
enum. Its corresponding string value is underlying Linux device name
(e.g., "usnic_1").
cmr=v1.7.4:subject="usnic BTL MPI_T pvars"
This commit was SVN r29545.
r29479.
This fixes some issues reported awhile ago in the openib btl. There
are a couple more unchecked mallocs but they are a bit more difficult
to fix since they are in void functions (btl_openib_endpoint.c).
Refs trac:2401.
cmr=v1.7.4:reviewer=miked
This commit was SVN r29543.
The following SVN revision numbers were found above:
r29479 --> open-mpi/ompi@d6ead2a3a5
The following Trac tickets were found above:
Ticket 2401 --> https://svn.open-mpi.org/trac/ompi/ticket/2401
Due to deallocation ordering (and an entirely missed deallocation), we
were leaking modest amounts of memory inside libusnic_verbs.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29485.
- some free lists simply were not being OBJ_DESTRUCTed, so they never
freed their internal memory
- channel->recv_segs.ctx was being assigned in a way that got clobbered
by ompi_free_list_init_new, so the cleanup code that relied on it
being set never ran
- numerous other ".ctx" assignments were similarly ineffectual and were
not being consumed, so I deleted them
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29484.
This new routine can be called in exceptional situations, either
conditionally in BTL code or from a debugger, to help with debugging in
cases where MSGDEBUG1/2 or stats logging are impractical but more detail
is needed.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29483.
Pull the bulk of the functionality out into a new routine,
ompi_btl_usnic_print_stats, which can be used in other debugging
contexts. This also lets us eliminate the module->final_stats state
tracking.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29482.
Prevent frag from being freed out from under us in the case
the PML callback routine calls usnic_free(). We accomplish this
by delaying decrement of sf_bytes_to_ack until after the callback is
performed, since sf_bytes_to_ack == 0 is condition of freeing the frag.
Fixes Cisco bug CSCuj45094.
Authored-by: Reese Faucette <rfaucett@cisco.com>
cmr=v1.7.3
This commit was SVN r29264.
MSGDEBUG2 now means "print a one-liner for all PML calls into BTL, and
also when BTL calls PML with a recv completion (not send completions)"
MSGDEBUG1 means print more internal gory detail
MSGDEBUG is gone, replaced by MSGDEBUG1
In the process also found that PUT_DEST style fragments could
potentially be leaked in usnic_free() since send_fragment tests were
being applied to see if it was eligible to be freed.
This commit was SVN r29185.
changes required to support MPI_Bsend(). Introduces concept of
attaching a buffer to a large segment that the PML can scribble into and
we will send from. The reason we don't use a pinned buffer and send
directly from that is that usnic_verbs does not (yes) support num_sge>1
for regular sends. This means the data gets copied twice, but that is
unavoidable.
changed the logic in handle_large_send to be more sensible
Incorporated David's review comments
This commit was SVN r29184.
Do not assume that the "size" passed to alloc_send() will be the same as
the size of the message the resulting fragment will hold when
usnic_send() is called. This means usnic_send()/usnic_put() can never
trust any pre-computed size values, and are only allowed to look at the
lengths and pointers of the elements in the desc SG list.
This commit was SVN r29183.
- tag needs to be sent in *our* header, not the PML header
- usnic_alloc() should return smaller value if too much data requested
- be careful about callbacks vs removing items from lists
(we need to remove from outr lists *before* the callback)
- improve send callback handling
- add some more MSGDEBUG2 logging and cleanup
This commit was SVN r29181.
The FREE_LIST_*_MT stuff was introduced on the SVN trunk in r28722
(2013-07-04), but so far, has not been merged into the v1.7 branch yet
(2013-09-06). So put it in its own #ifdef, rather than defining it
based on OMPI_MAJOR_VERSION/OMPI_MINOR_VERSION.
This commit was SVN r29148.
The following SVN revision numbers were found above:
r28722 --> open-mpi/ompi@c9e5ab9ed1
The Cisco-maintained v1.6 port of the usnic BTL has diverged from the
upstream trunk and v1.7 branches. This commit adjusts the trunk to more
closely match the v1.6 branch to simplify future merging and
cherry-picking.
The usnic MCA parameters also need work on this side.
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29138.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
The fix for the HPL SEGV was incorrect because it assumed the
prepare_src() routine was always allowed to return "bytes processed"
less than the requested "bytes to send". It turns out this is only true
if the convertor is what limits the size, we are not allowed to limit
the data sent for our own reasons, else we break login in the upper
layers.
This means we need to learn the number of bytes out of the size
requested the convertor will give us, no matter how big the size is.
Unfortunately, this is a destructive test, and (currently) the only way to
learn that number is to actually have the convertor copy the data out into
buffers.
This change implements this, copying the entire data out into a chain of
send segments which are attached to the large send fragment. Now we can
always return the proper size value to the PML.
Fixes Cisco bug CSCuj08024
Authored-by: Reese Faucette <rfaucett@cisco.com>
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29137.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
Authored-by: Reese Faucette <rfaucett@cisco.com>
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29136.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29135.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29134.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
