There is still a problem with OpenIB and threads (external to C/R functionality). It has been reported in Ticket #1539
Additionally:
* Fix a file cleanup bug in CRS Base.
* Fix a possible deadlock in the TCP ft_event function
* Add a mca_base_param_deregister() function to MCA base
* Add whole process checkpoint timers
* Add support for BTL: OpenIB, MX, Shared Memory
* Add support Mpool: rdma, sm
* Sundry bounds checking an cleanup in some scattered functions
This commit was SVN r19756.
OMPI trunk. Need all organizations to ensure I got spellings and
affiliations correct.
Also commit a helper script to help keep AUTHORS up to date on the
trunk; it should be run before we create release branches.
This commit was SVN r19612.
The new component fixes a number of problems with the old component. The core algorithm is the same, but by changing the data strucutres a bit we have improved performance and memory utilization.
There are still a couple corner cases that still need some work. However, I did not want to delay bringing this into the trunk (and v1.3 branch) for too much longer.
This commit was SVN r19537.
* Make the creation of the build dir for the man pages a bit more
robust (thanks to suggestions from Ralf W.).
* Only distribute the .Xin files, not the .X man pages themselves.
* Make the .X files depend on opal_config.h so that if you re-run
configure and change opal_config.h (e.g., a new version), the man
pages should get rebuilt.
* Man pages are now cleaned with "distclean", not "maintainer-clean".
* Fix a typo in opal_crs.7in.
* Udpate make_dist_tarball to update "date" in the VERSION file.
* Make make_dist_tarball a bit friendlier to hg checkouts.
This commit was SVN r19219.
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
parallel. Remove the "-j 4" so we don't get random tarball build failures.
Hopefully this won't take all that much longer to make the tarball each night.
This commit was SVN r18552.
Update the make_dist_tarball script and the HACKING file to the new trunk
autotools requirements, including the addition of a specific m4 version:
* m4 1.4.11
* autoconf 2.62
* automake 1.10.1
* libtool 2.2.4
This commit was SVN r18465.
The following Trac tickets were found above:
Ticket 1265 --> https://svn.open-mpi.org/trac/ompi/ticket/1265
Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs.
Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node.
This commit was SVN r18338.
Greatly reduce the number of "foo" -> "opal_foo" symbol renames in the
libevent source, and instead greatly expand the event_rename.h file
that uses preprocessor macros to make all public symbols be
"opal_foo".
This commit was SVN r17923.
Some MPI C interface files saw some spacing changes to conform to the coding standards of Open MPI.
Changed MPI C interface files to use {{{OPAL_CR_ENTER_LIBRARY()}}} and {{{OPAL_CR_EXIT_LIBRARY()}}} instead of just {{{OPAL_CR_TEST_CHECKPOINT_READY()}}}. This will allow the checkpoint/restart system more flexibility in how it is to behave.
Fixed the configure check for {{{--enable-ft-thread}}} so it has a know dependance on {{{--enable-mpi-thread}}} (and/or {{{--enable-progress-thread}}}).
Added a line for Checkpoint/Restart support to {{{ompi_info}}}.
Added some options to choose at runtime whether or not to use the checkpoint polling thread. By default, if the user asked for it to be compiled in, then it is used. But some users will want the ability to toggle its use at runtime.
There are still some places for improvement, but the feature works correctly. As always with Checkpoint/Restart, it is compiled out unless explicitly asked for at configure time. Further, if it was configured in, then it is not used unless explicitly asked for by the user at runtime.
This commit was SVN r17516.
Update properties to ignore the carto_file_lex.c file since that is also dynamically generated.
Update the build-hgignore.pl to properly disregard DS_Store files
This commit was SVN r17301.
* Remove duplicate %{_sysconfdir} in the % files sections when
building the sub-packages.
* When building the sub-packages, ensure that devel.files also picks
up the F90 module.
* Hard-code the directory name "openmpi" into _pkglibdir (vs. using
%{name}) because the OMPI code base has it hard-coded as well.
Thanks to Jim Kusznir for noticing the problem.
This commit was SVN r17036.
* Fix some missing includes in a few places.
* Add the cr_request() functionality to the BLCR CRS component.
We are now dependent upon the 0.6.* series of BLCR.
* Made the CR notification mechanism a registered function.
This way we can have an OPAL-only version and it can be replaced at
runtime with the ORTE version.
* Add a 'opal_cr_allow_opal_only' parameter that will enable OPAL-only
CR functionality when the user wants it. Default: Disabled.
* Fix the placement of a checkpoint request check in MPI_Init
* Pull the OPAL notification mechanism into the SnapC framework.
* We no longer fork/exec the 'opal-checkpoint' command for local
checkpointing, the Local coordinator in the orted does this directly.
* The Local and Application coordinator talk together bypassing the OPAL
notifiation mechanism.
* Optimized the Local <-> App Coordinator communication.
* Improved the structure used to track vpid_snapshots in the local coord.
* Fix a race condition in which an application under heavy communication load
may produce an inconsistent global checkpoint.
This commit was SVN r16389.
grpcomm cnos component
- Remove the .ompi_ignore
- add a configure.m4 that should keep it from building on any system
other than Cray XT* (copied from rml/cnos)
- Fix some mis-named symbols resulting from cut/paste errors.
This patch brings the Cray build back into 'working' order.
This commit was SVN r15651.
Add support for Cray cross compile systems (otherwise configure fails)
This commit was SVN r15136.
The following SVN revision numbers were found above:
r15133 --> open-mpi/ompi@d3372729bb
use_default_rpm_opt_flags. It defaults to a value of 1, meaning that
we'll try to use $RPM_OPT_FLAGS. But if you're not compiling with the
GNU compilers, you might want to set this value to 0 so that your
compiler doesn't get flags that it doesn't understand (e.g., PGI 7.0
will barf on flags that it doesn't understand).
This commit was SVN r14477.
finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
include the fixes to the backtrace and signal handler code for x86_64 builds,
so no need to disable them in the configure code.
This commit was SVN r14278.
while LAM/MPI was at IU (well after it was at Notre Dame or OSC). I wrote
the original version, so I am positive of this fact. The ND and OSC
copyrights should never have been committed into the LAM/MPI tree, much
less the Open MPI tree as this code has no origin with either institution.
The bulk of the script was developed at Indiana University (again, almost
entirely by myself), with later additions after I moved to Los Alamos.
This commit was SVN r14277.
- Remove OMPI_VER_PACKAGE from the user-editable configuration
stuff -- users shouldn't ever need to deal with it
- Disable the stack trace stuff, since it causes problems
on 64 bit Intel builds
- Only include binaries for 32 bit platforms, but libraries
for 32 and 64 bit platforms
- Print more information about build configuration during
the start of the script
This commit was SVN r14276.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
- mca_base_param_file_prefix
(Default: NULL)
This is the fullname of the "-am" mpirun option. Used to specify a ':'
separated list of AMCA parameter set files.
- mca_base_param_file_path
(Default: $SYSCONFDIR/amca-param-sets/:$CWD)
The path to search for AMCA files with relative paths. A warning will be
printed if the AMCA file cannot be found.
* Added a new function "mca_base_param_recache_files" the re-reads the file
configurations. This is used internally to help bootstrap the MCA system.
* Added a new orterun/mpirun command line option '-am' that aliases for the
mca_base_param_file_prefix MCA parameter
* Exposed the opal_path_access function as it is generally useful in other
places in the code.
* New function "opal_cmd_line_make_opt_mca" which will allow you to append a
new command line option with MCA parameter identifiers to set at the same
time. Previously this could only be done at command line declaration time.
* Added a new directory under the $pkgdatadir named "amca-param-sets" where all
the 'shipped with' Open MPI AMCA parameter sets are placed. This is the first
place to search for AMCA sets with relative paths.
* An example.conf AMCA parameter set file is located in
contrib/amca-param-sets/.
* Jeff Squyres contributed an OpenIB AMCA set for benchmarking.
Note: You will need to autogen with this commit as it adds a configure param.
Sorry :(
This commit was SVN r13867.
- only include binaries for ppc/i386 -- no need for 64 bit
- default to not printing load errors so that the XGrid pls
doesn't cause errors when doing 64 bit builds
This commit was SVN r13577.
* Separate out test clauses; don't have the same guarantees of
left-to-right evaluation in shell script that you do in other
languages (i.e., protect against the case of running "basename ''")
This commit was SVN r13463.
- The Verification check only checked that a file that's in SVN is there,
which AM would have complained about during make dist, so it's really
a pointless check
- No need to remove / restore autogen.sh, as AM isn't going to put it
in the tarball anyway, and even if it would, this thing would only
cause it to fail during make dist. All this step did was erase any
changes you had to autogen.sh when you run make_dist_tarball, which
really sucks.
This commit was SVN r13307.
deploy: will create a full binary distribution (.msi file)
ompi-small: will create an update binary distribution(
no include files, nothing else except the libs and execs).
ompi_install.sh: sh script to install manually into a specific
target directory.
This commit was SVN r12589.
