OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
checking for contiguous datatypes by using our native DDT engine
(rather than several MPI_* calls). The majority of the work is in the
IO ROMIO module.c file, but there's a small part in
adio/common/iscontig.c that we're also submitting upstream.
This commit was SVN r19509.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
Update the version of ROMIO to that which was contained in
MPICH2-1.0.7, plus a few patches from the upstream ROMIO maintainers
(because OMPI uses a few code paths in ROMIO that MPICH2 does not;
there were a few compile bugs in the ROMIO from MPICH2-1.0.7).
Added an info MCA param to be able to tell which version of ROMIO is
contained in OMPI: io_romio_version.
Many, many thanks to romio-maint@mcs.anl.gov for all their help in
integrating this new version of ROMIO into Open MPI.
This commit was SVN r19045.
The following Trac tickets were found above:
Ticket 1370 --> https://svn.open-mpi.org/trac/ompi/ticket/1370
ROMIO in Open MPI (the new version of ROMIO will make this patch
defunct, and David Daniel has confirmed that no one at LANL is using
this functionality, anyway).
Refs trac:1370.
This commit was SVN r18819.
The following Trac tickets were found above:
Ticket 1370 --> https://svn.open-mpi.org/trac/ompi/ticket/1370
1. The send path get shorter. The BTL is allowed to return > 0 to specify that the
descriptor was pushed to the networks, and that the memory attached to it is
available again for the upper layer. The MCA_BTL_DES_SEND_ALWAYS_CALLBACK flag
can be used by the PML to force the BTL to always trigger the callback.
Unmodified BTL will continue to work as expected, as they will return OMPI_SUCCESS
which force the PML to have exactly the same behavior as before. Some BTLs have
been modified: self, sm, tcp, mx.
2. Add send immediate interface to BTL.
The idea is to have a mechanism of allowing the BTL to take advantage of
send optimizations such as the ability to deliver data "inline". Some
network APIs such as Portals allow data to be sent using a "thin" event
without packing data into a memory descriptor. This interface change
allows the BTL to use such capabilities and allows for other optimizations
in the future. All existing BTLs except for Portals and sm have this interface
set to NULL.
This commit was SVN r18551.
via the visibility feature that is provided by some compilers.
Per default this feature is disabled, to enable it you need to
configure with --enable-visibility and obviously you need a compiler
with visibility support. Please refer to the wiki for more information.
https://svn.open-mpi.org/trac/ompi/wiki/Visibility
This commit was SVN r14582.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
explicitly enabled at run-time with the mca parameter
io_romio_enable_parallel_optimizations set to something non-zero.
This will enable some magic flags in Panasas if the user didn't
set them (either on or off) and do some slightly better things
with strided collective writes.
This commit was SVN r10516.
things I found:
- Locking should prevent it from happening (I think), but there was a
race condition in the component progress -- a callback could be
triggered that would free the request before it was off the outstanding
requests list.
- When pulling a request off the component free list, make sure to
reinitialize the free_called state on the IO request. This was
what was causing Edgar's failures
- In the request cleanup code, pull the request out of the per-
component free list before returning to the free list. This
probably would cause asserts to fire, although it looks like
I wrote the loops such that it would have been memory safe if
the asserts didn't fire. Not really sure why I did that, but
let's try it again...
This should go to the v1.0 and v1.1 branches.
This commit was SVN r9913.
to let the PML (or io, more generally the low level request manager)
to have it's own release function (what was before the req_fini). This
function will only be called from the low level while the req_free will
be called from the upper level (MPI layer) in order to mark the request
as not used by the user anymore.
From the request point of view the requests will be marked as inactive
everytime we read their status (true for persistent as well). As
MPI_REQUEST_NULL is already marked as inactive, the test and wait functions
are simpler. The drawback is that now we have to change in the
ompi_request_{test|wait} the req_status of the request once we get it's
status.
This commit was SVN r9290.
functionality. This is a global registration, so all components have to be made
aware of the registration -- therefore, do things at the component level, not the
module level.
This commit was SVN r8314.
(because we kept bumping up against the max filename limit in "tar"
when making tarballs, especially if the version number got long).
This commit was SVN r7065.
- new preferred API calls for registering MCA parameters are
mca_base_param_reg_{int|string} and
mca_base_param_reg_{int|string}_name.
- See opal/mca/base/mca_base_param.h for docs on new calls.
- Can now register and lookup a value at the same time.
- Can now mark a parameter "read only" at registration time
- Can now mark a parameter "internal" at registration time
- Can now associate a help message with the parameter at registration
time; displayed in the ompi_info output.
The old API calls are still available for backwards compatibility
(mca_base_param_register_{int|string}. They will eventually be
removed -- all developers are encouraged to use the new APIs from here
on out and replace any old calls with the new API.
Some params were also renamed -- the previous convention of using
"base_" as a prefix for any param that was not associated with a
component is henceforth deprecated. Instead, use one of the following
prefixes:
mca: for anything in the MCA base itself
opal: for anything in OPAL
orte: for anything in ORTE
mpi: for anything in OMPI
This commit was SVN r6698.
frameworks, and components without configure scripts instead of
hard-coded shell variables (for projects and frameworks) and
shell variable building (for components).
* Add 3rd category of component configuration (in addition to configure
scripts and no-configured components): configure.m4 components. These
components can only be built as part of OMPI (like no-configure), but
can provide an m4 file that is run as part of the main configure
script. These macros can set whether the component should be built,
along with just about any other configuration wanted. More care must
be taken compared to configure components, as doing things like setting
variables or calling AC_MSG_ERROR now affects the top-level configure
script (so calling AC_MSG_ERROR if your component can't configure
probably isn't what you want)
* Added support to autogen.sh for the configure.m4-style components,
as well as building up the m4_define lists ompi_mca.m4 now expects
* Updated a number of macros to be more config.cache friendly (both
so that config.cache can be used and so the test can be quickly
run multiple times in the same configrue script):
- ompi_config_asm
- c_weak_symbols
- c_get_alignment
* Added new macros to be shared when configuring components:
- ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...)
- ompi_check_xgrid
- ompi_check_tm
- ompi_check_bproc
* Updated a number of components to use configure.m4 instead of
configure.stub
- btl portals
- io romio
- tm ras and pls
- bjs, lsf_bproc ras and bproc_seed pls
- xgrid ras and pls
- null iof (used by tm)
This commit was SVN r6412.
- After long discussions and ruminations on how we run components in
LAM/MPI, made the decision that, by default, all components included
in Open MPI will use the version number of their parent project
(i.e., OMPI or ORTE). They are certaint free to use a different
number, but this simplification makes the common cases easy:
- components are only released when the parent project is released
- it is easy (trivial?) to distinguish which version component goes
with with version of the parent project
- removed all autogen/configure code for templating the version .h
file in components
- made all ORTE components use ORTE_*_VERSION for version numbers
- made all OMPI components use OMPI_*_VERSION for version numbers
- removed all VERSION files from components
- configure now displays OPAL, ORTE, and OMPI version numbers
- ditto for ompi_info
- right now, faking it -- OPAL and ORTE and OMPI will always have the
same version number (i.e., they all come from the same top-level
VERSION file). But this paves the way for the Great Configure
Reorganization, where, among other things, each project will have
its own version number.
So all in all, we went from a boatload of version numbers to
[effectively] three. That's pretty good. :-)
This commit was SVN r6344.
