This commit brings the scif btl up to date with changes made on master
to rework the mpool and rcache frameworks.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Turns out there are some cases where the Cray
wlm_detect_get_active may return NULL, in which
case fallback to wlm_detect_get_default method
is suggested. Make use of the fallback to
avoid segfaults under some circumstances in the
ALPS plm selection method.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
This commit uses the new flag "enumerator" to support comma-delimited
lists of flags for both the btl and btl atomic flags. After this
commit is is valid to specify something like -mca btl_foo_flags
self,put,get,in-place. All non-deprecated flags are supported by the
enumerator.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds a new type of enumerator meant to support flag
values. The enumerator parses comma-delimited strings and matches
each string or value to a list of valid flags. Additionally, the
enumerator does some basic checks to see if 1) a flag is valid in the
enumerator, and 2) if any conflicting flags are specified.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds the data necessesary for supporting dynamic add_procs
to the rdma message (opal_process_name_t). The endpoint lookup
function has been updated to match the code in udcm.
Closesopen-mpi/ompi#1468.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
A bus error occurs in sm OSC under the following conditions.
- sparc64 or any other architectures which need strict alignment.
- `MPI_WIN_POST` or `MPI_WIN_START` is called for a window created
by sm OSC.
- The communicator size is odd and greater than 3.
The lines 283-285 in current `ompi/mca/osc/sm/osc_sm_component.c` has
the following code.
```c
module->global_state = (ompi_osc_sm_global_state_t *) (module->segment_base);
module->node_states = (ompi_osc_sm_node_state_t *) (module->global_state + 1);
module->posts[0] = (uint64_t *) (module->node_states + comm_size);
```
The size of `ompi_osc_sm_node_state_t` is multiples of 4 but not
multiples of 8. So if `comm_size` is odd, `module->posts[0]` does
not aligned to 8. This causes a bus error when accessing
`module->posts[i][j]`.
This patch fixes the alignment of `module->posts[0]` by setting
`module->posts[0]` first.
Fix CID 1345825 (1 of 1): Dereference before null check (REVERSE_INULL):
ib_proc should not be NULL in this case. Removed the check and added a
check for NULL after OBJ_NEW.
CID 1269821 (1 of 1): Dereference null return value (NULL_RETURNS):
I labeled this one as a false positive (which it is) but the code in
question could stand be be cleaned up.
Fix CID 1356424 (1 of 1): Argument cannot be negative (NEGATIVE_RETURNS):
While trying to silence another Coverity issue another was
flagged. Protect the close of fd with if (fd >= 0).
CID 70772 (1 of 1): Dereference null return value (NULL_RETURNS):
CID 70773 (1 of 1): Dereference null return value (NULL_RETURNS):
CID 70774 (1 of 1): Dereference null return value (NULL_RETURNS):
None of these are errors and are intentional but now that we have a
list release function use that to make these go away. The cleanup is
similar to CID 1269821.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix CID 1315298: Resource leak (RESOURCE_LEAK) :
Fix CID 1315300: Resource leak (RESOURCE_LEAK):
Fix CID 1315299: Resource leak (RESOURCE_LEAK):
Fix CID 1315297 (#1 of 1): Resource leak (RESOURCE_LEAK):
Confirmed leaks in error paths. Added the leaked arrays to the
ERR_EXIT macro to ensure they are freed.
Fix CID 1315296 (#1 of 1): Resource leak (RESOURCE_LEAK):
Confirmed leak in error paths. Both the oversub and reqs arrays are
leaked. Free these arrays on error.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix CID 1269976 (#1 of 1): Unused value (UNUSED_VALUE):
Fix CID 1269979 (#1 of 1): Unused value (UNUSED_VALUE):
Removed unused variables k_temp1 and k_temp2.
Fix CID 1269981 (#1 of 1): Unused value (UNUSED_VALUE):
Fix CID 1269974 (#1 of 1): Unused value (UNUSED_VALUE):
Removed gotos and use the matched flags to decide whether to return.
Fix CID 715755 (#1 of 1): Dereference null return value (NULL_RETURNS):
This was also a leak. The items on cs->ctl_structures are allocated using OBJ_NEW so they mist be released using OBJ_RELEASE not OBJ_DESTRUCT. Replaced the loop with OPAL_LIST_DESTRUCT().
Fix CID 715776 (#1 of 1): Dereference before null check (REVERSE_INULL):
Rework error path to remove REVERSE_INULL. Also added a free to an error path where it was missing.
Fix CID 1196603 (#1 of 1): Bad bit shift operation (BAD_SHIFT):
Fix CID 1196601 (#1 of 1): Bad bit shift operation (BAD_SHIFT):
Both of these are false positives but it is still worthwhile to fix so they no longer appear. The loop conditional has been updated to use radix_mask_pow instead of radix_mask to quiet these issues.
Fix CID 1269804 (#1 of 1): Argument cannot be negative (NEGATIVE_RETURNS):
In general close (-1) is safe but coverity doesn’t like it. Reworked the error path for open to not try to close (-1).
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix CID 715744 (#1 of 1): Logically dead code (DEADCODE):
Fix CID 715745 (#1 of 1): Logically dead code (DEADCODE):
The free of scratch_num in either place is defensive programming. Instead of removing the free the conditional around the free has been removed to quiet the warning.
Fix CID 715753 (#1 of 1): Dereference after null check (FORWARD_NULL):
Fix CID 715778 (#1 of 1): Dereference before null check (REVERSE_INULL):
Fixed the conditional to check for collective_alg != NULL instead of collective_alg->functions != NULL.
Fix CID 715749 (#1 of 4): Explicit null dereferenced (FORWARD_NULL):
Updated code to ensure that none of the parse functions are reached with a non-NULL value.
Fix CID 715746 (#1 of 1): Logically dead code (DEADCODE):
Removed dead code.
Fix CID 715768 (#1 of 1): Resource leak (RESOURCE_LEAK):
Fix CID 715769 (#2 of 2): Resource leak (RESOURCE_LEAK):
Fix CID 715772 (#1 of 1): Resource leak (RESOURCE_LEAK):
Move free calls to before error checks to cleanup leak in error paths.
Fix CID 741334 (#1 of 1): Explicit null dereferenced (FORWARD_NULL):
Added a check to ensure temp is not dereferenced if it is NULL.
Fix CID 1196605 (#1 of 1): Bad bit shift operation (BAD_SHIFT):
Fixed overflow in calculation by replacing int mask with 1ul.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix CID 1325868 (#1 of 1): Dereference after null check (FORWARD_NULL):
Fix CID 1325869 (#1-2 of 2): Dereference after null check (FORWARD_NULL):
Here reqs can indeed be NULL. Added a check to
ompi_coll_base_free_reqs to prevent dereferencing NULL pointer.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Fix CID 1324726 (#1 of 1): Free of address-of expression (BAD_FREE):
Indeed, if a lock conflicts with the lock_all we will end up trying to
free an invalid pointer.
Fix CID 1328826 (#1 of 1): Dereference after null check (FORWARD_NULL):
This was intentional but it would be a good idea to check for
module->comm being non_NULL to be safe. Also cleaned out some checks
for NULL before free().
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit changes the opal_fifo_push code to use
opal_update_counted_pointer to set the head. This fixes a data race
that occurs because the read of the fifo head in opal_fifo_pop
requires two instructions. This combined with the non-atomic update in
opal_fifo_push can lead to an ABA issue that puts the fifo in an
inconsistant state.
There are other ways this problem could be fixed. One way would be to
introduce an opal_atomic_read_128 implementation. On x86_64 this would
have to use the cmpxchg16b instruction. Since this instruction would
have to be in the pop path (and always executed) it would be slower
than the fix in this commit.
Closesopen-mpi/ompi#1460.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
