* Resolves#3705
* Components should link against the project level library to better
support `dlopen` with `RTLD_LOCAL`.
* Extend the `mca_FRAMEWORK_COMPONENT_la_LIBADD` in the `Makefile.am`
with the appropriate project level library:
```
MCA components in ompi/
$(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
MCA components in orte/
$(top_builddir)/orte/lib@ORTE_LIB_PREFIX@open-rte.la
MCA components in opal/
$(top_builddir)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
MCA components in oshmem/
$(top_builddir)/oshmem/liboshmem.la"
```
Note: The changes in this commit were automated by the script in
the commit that proceeds it with the `libadd_mca_comp_update.py`
script. Some components were not included in this change because
they are statically built only.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
This commit makes bml/r2 more restrictive on which endpoints end up in the rdma
endpoint list. Before this commit an endpoint was added if it supported either
put or get. This was done to ensure that endpoints are available for RMA.
Thought it is possible to support put or get endpoints we only currently
support endpoints that have put, get, and amos. bml/r2 now reflects this
support.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit changes the behavior of bml/r2 from conditionally
registering btl progress functions to always registering progress
functions. Any progress function beloning to a btl that is not yet in
use is registered as low-priority. As soon as a proc is added that
will make use of the btl is is re-registered normally.
This works around an issue with some btls. In order to progress a
first message from an unknown peer both ugni and openib need to have
their progress functions called. If either btl is not in use after the
first call to add_procs the callback was never happening. This commit
ensures the btl progress function is called at some point but the
number of progress callbacks is reduced from normal to ensure lower
overhead when a btl is not used. The current ratio is 1 low priority
progress callback for every 8 calls to opal_progress().
Fixesopen-mpi/ompi#1676
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
There were some old/stale function names in some debugging/verbose
opal_output calls. Use __func__ instead, so that they won't become
stale in the future.
Thanks to Durga Choudhury for pointing out the issue.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit ensures the bml is always enabled whether or not it will
be used. This ensures that any available btls communicate their modex
so that they can be used for one-sided communication.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds code to detect when procs are unreachable when using
the dynamic add_procs functionality.
Fixes#1501
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit removes the --with-mpi-thread-multiple option and forces
MPI_THREAD_MULTIPLE support. This cleans up an abstration violation
in opal where OMPI_ENABLE_THREAD_MULTIPLE determines whether the
opal_using_threads is meaningful. To reduce the performance hit on
MPI_THREAD_SINGLE programs an OPAL_UNLIKELY is used for the
check on opal_using_threads in OPAL_THREAD_* macros.
This commit does not clean up the arguments to the various functions
that take whether muti-threading support is enabled. That should be
done at a later time.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit add protection to the group, ob1, and bml endpoint lookup
code. For ob1 and the bml a lock has been added. For performance
reasons the lock is only held if a bml or ob1 endpoint does not
exist. ompi_group_dense_lookup no uses opal_atomic_cmpset to ensure
the proc is only retained by the thread that actually updates the
group.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The add_procs change made some assumptions in the bml/r2 add_procs
wrong. This lead to del_procs never being called. I removed the logic
that checks the ompi_proc_t reference count and removed an unnecessary
allocation. The allocation only makes sense if we pass more than a
single proc at a time to the btl del_procs.
This commit also ensures that the btl del_procs is called if the
endpoint is in the btl_rdma array but not the btl_send array.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit contains the following changes:
- bml: add a function to add a single process. this function is
intended to remove the need to maintain a opal_bitmap_t as it is
irrelevant for a single proc. BTLs will need to be updated to
either 1) ignore the return code from opal_bitmap_set_bit or not
call the function if the reachability bitmap is NULL.
- bml: add an inline accessor function for getting the bml endpoint
for a peer proc. this function will either 1) return the cached bml
endpoint, or 2) create the endpoint and call add_proc will all
available BTL modules.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds support for project_framework_component_* parameter
matching. This is the first step in allowing the same framework name
in multiple projects. This change also bumps the MCA component version
to 2.1.0.
All master frameworks have been updated to use the new component
versioning macro. An mca.h has been added to each project to add a
project specific versioning macro of the form
PROJECT_MCA_VERSION_2_1_0.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Enabling the FT code breaks compilation (again). This series
tries to fix the compiler errors. This is again only fixing
the compiler errors without any warranty that the result
might actually support FT again.
The FT code used barrier mechanisms which have been removed
with aec5cd08bd. This patch replaces
all those different barriers with opal_pmix.fence(NULL, 0);
I am not sure this is completely correct but at least a starting
point for a review.
Enabling the FT code breaks compilation (again). This series
tries to fix the compiler errors. This is again only fixing
the compiler errors without any warranty that the result
might actually support FT again.
This first patch moves orte_cr_continue_like_restart from ORTE
to opal_cr_continue_like_restart in OPAL. This only leaves three
calls from OPAL to ORTE in the FT code. As it is not yet 100%
clear how to handle these calls the code orte_sstore.set_attr()
has been #ifdef'd out for now.
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
Background: In order to support atomics each btl needs to provide support
for communicating with self unless the btl module can guarantee global
atomicity. Before this commit bml/r2 discarded any BTL with lower
exclusivity than an existing send btl. This would cause the BML to
discard any btl other than self.
The new behavior is as follows:
- If an exisiting send btl has higher exclusivity then the btl will not be
added to the send btl list for the endpoint.
- If a btl provides RDMA support then it is always added to the rdma btl
list.
- bml_btl weight for send btls is now calculated across all send btls.
- bml_btl weight for rdma btls is now calculated across all rdma btls.
With this change self should still win as the only send btl for loopback
without disqualifying other btls (ugni, openib) for atomic operations.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Background: In order to support atomics each btl needs to provide support
for communicating with self unless the btl module can guarantee global
atomicity. Before this commit bml/r2 discarded any BTL with lower
exclusivity than an existing send btl. This would cause the BML to
discard any btl other than self.
The new behavior is as follows:
- If an exisiting send btl has higher exclusivity then the btl will not be
added to the send btl list for the endpoint.
- If a btl provides RDMA support then it is always added to the rdma btl
list.
- bml_btl weight for send btls is now calculated across all send btls.
- bml_btl weight for rdma btls is now calculated across all rdma btls.
With this change self should still win as the only send btl for loopback
without disqualifying other btls (ugni, openib) for atomic operations.
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
mca_btl_base_segment_t and replace them with des_local and des_remote
This change also updates the BTL version to 3.0.0. This commit does
not represent the final version of BTL 3.0.0. More changes are coming.
In making this change I updated all of the BTLs as well as BTL user's
to use the new structure members. Please evaluate your component to
ensure the changes are correct.
RFC text:
This is the first of several BTL interface changes I am proposing for
the 1.9/2.0 release series.
What: Change naming of btl descriptor members. I propose we change
des_src and des_dst (and their associated counts) to be des_local and
des_remote. For receive callbacks the des_local member will be used to
communicate the segment information to the callback. The proposed change
will include updating all of the doxygen in btl.h as well as updating
all BTLs and BTL users to use the new naming scheme.
Why: My btl usage makes use of both put and get operations on the same
descriptor. With the current naming scheme I need to ensure that there
is consistency beteen the segments described in des_src and des_dst
depending on whether a put or get operation is executed. Additionally,
the current naming prevents BTLs that do not require prepare/RMA matched
operations (do not set MCA_BTL_FLAGS_RDMA_MATCHED) from executing
multiple simultaneous put AND get operations. At the moment the
descriptor can only be used with one or the other. The naming change
makes it easier for BTL users to setup/modify descriptors for RMA
operations as the local segment and remote segment are always in the
same member field. The only issue I forsee with this change is that it
will require a little more work to move BTL fixes to the 1.8 release
series.
This commit was SVN r32196.
of existing BTL fo an endpoint, all the others are just partial list.
Thus, all the cleaning should first be done in the btl_send array,
and them in the other arrays (btl_eager and btl_rdma).
This commit was SVN r31834.
This commit fixes two issues:
- This intent of the code @ bml_r2.c:486 is to prevent calling the
btl_del_procs more than once for a given proc. Gilles correctly
identified there was a problem in this code but r31786 we not the
correct fix.
- Fix a segmentation fault in r2 finalize revealed by the fact we
actually call del_procs now.
cmr=v1.8.2:reviewer=ggouaillardet:ticket=trac:4645
This commit was SVN r31829.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
r31786 --> open-mpi/ompi@fc96b0a7b8
The following Trac tickets were found above:
Ticket 4645 --> https://svn.open-mpi.org/trac/ompi/ticket/4645
