Cleanup a typo, and remove no longer needed MCA params for hetero nodes and hetero apps. Hetero nodes will always be automatically detected. We don't support a mix of 32 and 64 bit apps
Modify the orte_node_t to use orte_topology_t instead of hwloc_topology_t, updating all the places that use it. Ensure that we properly update topology when we see a different one on a compute node.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This commit fixes rare race condition that occurs when the process
that is calling `exit(-1)` has delay between fd cleanup and actual
OS-level exit. This may happen if the process has some work to do
`on_exit()`.
**Problem description**:
Consider an application process that has called `exit(nonzero)`, it's
fd's was closed
but it's actual termination at OS level is delayed by some cleanups (eg.
in callbacks registered via `on_exit()`).
Observed sequence of events was the following:
* orted gets stdio disconnection and activating `IOF COMPLETE` state.
* parallel OOB disconnection causes `COMMUNICATION FAILURE` state to be
activated.
* during `COMMUNICATION FAILURE` processing `odls_base_default_wait_local_proc`
is called even though real waitpid wasn't yet called (code mentions that
waitpid might not be called for unspecified reason). Because of that real exit
code is unknown and set to 0. `odls_base_default_wait_local_proc` callback sees
`IOF COMPLETE` flag and in conjunction with 0-exit-code it activates
`WAITPID FIRED` state.
* processing of `WAITPID FIRED` leads to `NORMALLY TERMINATED` to be
activated.
* `NORMALLY TERMINATED` state in particular leads `ORTE_PROC_FLAG_ALIVE` flag
for this proc to be dropped.
* when application process finally exits and `wait_signal_callback` is
launched. It sets real exit code and calls `odls_base_default_wait_local_proc`
again but at this time since the process has `ORTE_PROC_FLAG_ALIVE` flag
dropped `WAITPID FIRED` state is activated (instead of `EXITED WITH NON-ZERO`)
leading to a hang that was observed.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
Update ORTE support for dynamic PMIx operations e.g., PMIx_Spawn
Update to track master
Ensure that --disable-pmix-dstore actually disables the dstore. Sync to a few debugger updates
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
PR open-mpi/ompi#2432 introduced a regression where configure
and build with --disable-dlopn caused build failure owing
to unresolved alps lli symbols in the libopal-pal shared library.
This commit fixes this problem.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
Still not completely done as we need a better way of tracking the routed module being used down in the OOB - e.g., when a peer drops connection, we want to remove that route from all conduits that (a) use the OOB and (b) are routed, but we don't want to remove it from an OFI conduit.
If requested, obtain stacktraces for each application process and report it to stderr upon timeout
stack traces: minor improvements
- Also include the hostname and PID of the each process for which
we're sending the stack traces (vs. just including the ORTE process
name)
- Send a specific error message if we couldn't find "gstack" in the
$PATH (e.g., on OS X)
- Send a sepcific error message if gstack fails to run
- Print a message that obtaining the stack traces may take a few
seconds so that users don't wonder what's happening
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
help-orterun.txt: minor tweaks
Trivial update: show "--timeout" (instead of "-timeout") in the help
message, just to encourage the use of double-dash options.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
trivial: stacktrace -> stack trace
Trivial word smything.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
It is verbotten to use opal_output() after the fork() but before the
exec()! It results in all manner of undefined behavior. For example,
on some OS X systems, if you run a trivial "hello world" MPI program
with a high level of ODLS verbosity:
```sh
$ mpirun -np 3 --mca odls_base_verbose 100 ./hello_c
```
You will see a bunch of output from the mpirun ODLS base, but then it
*may* hang in odls_default_module.c:do_child() -- after the fork() but
before the exec() -- while trying to opal_output() some debugging
statements.
The solution is to remove these extraneous opal_output() statements.
Indeed, the ODLS base is already outputting the same information that
these opal_output() statements are trying to emit, anyway.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
* Clean up the DVM so it continues to run even when applications error out and we would ordinarily abort the daemons.
* Create a new errmgr component for the DVM to handle the differences.
* Cleanup the DVM state component.
* Add ORTE bindings directory and brief README
* Pass a local tool index around to match jobs.
* Pass the jobid on job completion.
* Fix initialization logic.
* Add framework for python wrapper.
* Fix terminate-with-non-zero-exit behavior so it properly terminates only the indicated procs, notifies orte-submit, and orte-dvm continues executing.
* Add some missing options to orte-dvm
* Fix a bug in -host processing that caused us to ignore the #slots designator. Add a new attribute to indicate "do not expand the DVM" when submitting job spawn requests.
* It actually makes no sense that we treat the termination of all children differently than terminating the children of a specific job - it only creates confusion over the difference in behavior. So terminate children the same way regardless.
Extend the cmd_line utility to easily allow layering of command line definitions
Catch up with ORTE interface change and make build more generic.
Disable "fixed dvm" logic for now.
Add another cmd_line function to merge a table of cmd line options with another one, reporting as errors any duplicate entries. Use this to allow orterun to reuse the orted_submit code
Fix the "fixed_dvm" logic by ensuring we reset num_new_daemons to zero. Also ensure that the nidmap is sent with the first job so the downstream daemons get the node info. Remove a duplicate cmd line entry in orterun.
Revise the DVM startup procedure to pass the nidmap only once, at the startup of the DVM. This reduces the overhead on each job launch and ensures that the nidmap doesn't get overwritten.
Add new commands to get_orted_comm_cmd_str().
Move ORTE command line options to orte_globals.[ch].
Catch up with extra orte_submit_init parameter.
Add example code.
Add documentation.
Bump version.
The nidmap and routing data must be updated prior to propagating the xcast or else the xcast will fail.
Fix the return code so it is something more expected when an error occurs. Ensure we get an error returned to us when we fail to launch for some reason. In this case, we will always get a launch_cb as we did indeed attempt to spawn it. The error code will be returned in the complete_cb.
Fix the return code from orte_submit_job - it was returning the tracker index instead of "success". Take advantage of ORTE's pretty-print capabilities to provide a nice error output explaining why we failed to launch. Ensure we always get a launch_cb when we fail to launch, but no complete_cb as the job never launched.
Extend the error reporting capability to job completion as well.
Add index parameter to orte_submit_job().
Add orte_job_cancel and implement ORTE_DAEMON_TERMINATE_JOB_CMD.
Factor out dvm termination.
Parse the terminate option at tool level.
Add error string for ORTE_ERR_JOB_CANCELLED.
Add some safeguards.
Cleanup and/of comments.
Enable the return.
Properly ORTE_DECLSPEC orte_submit_halt.
Add orte_submit_halt and orte_submit_cancel to interface.
Use the plm interface to terminate the job
The mca_base_select function uses returned priorities to select the
best component/module. This priority may be of use to the caller so
pass that information back in an optional argument. If the priority is
not needed pass NULL.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Bring Slurm PMI-1 component online
Bring the s2 component online
Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways.
Bring the OMPI pubsub/pmi component online
Get comm_spawn working again
Ensure we always provide a cpuset, even if it is NULL
pmix/cray: adjust cray pmix component for pmix
Make changes so cray pmix can work within the integrated
ompi/pmix framework.
Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet
Cleanup comm_spawn - procs now starting, error in connect_accept
Complete integration
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Changing the client to leave its socket as blocking during the connect doesn't solve the problem by itself - you also have to introduce a sleep delay once the backlog is hit to avoid simply machine-gunning your way thru retries. This gets somewhat difficult to adjust as you don't want to unnecessarily prolong startup time.
We've solved this before by adding a listening thread that simply reaps accepts and shoves them into the event library for subsequent processing. This would resolve the problem, but meant yet another daemon-level thread. So I centralized the listening thread support and let multiple elements register listeners on it. Thus, each daemon now has a single listening thread that reaps accepts from multiple sources - for now, the orte/pmix server and the oob/usock support are using it. I'll add in the oob/tcp component later.
This still didn't fully resolve the SMP problem, especially on coprocessor cards (e.g., KNC). Removing the shared memory dstore support helped further improve the behavior - it looks like there is some kind of memory paging issue there that needs further understanding. Given that the shared memory support was about to be lost when I bring over the PMIx integration (until it is restored in that library), it seemed like a reasonable thing to just remove it at this point.
A few uninitialized common symbols are remaining (generated by flex) :
* orte/mca/rmaps/rank_file/rmaps_rank_file_lex.c: orte_rmaps_rank_file_leng
* orte/mca/rmaps/rank_file/rmaps_rank_file_lex.c: orte_rmaps_rank_file_text
* orte/util/hostfile/hostfile_lex.c: orte_util_hostfile_leng
* orte/util/hostfile/hostfile_lex.c: orte_util_hostfile_text
This commit adds support for project_framework_component_* parameter
matching. This is the first step in allowing the same framework name
in multiple projects. This change also bumps the MCA component version
to 2.1.0.
All master frameworks have been updated to use the new component
versioning macro. An mca.h has been added to each project to add a
project specific versioning macro of the form
PROJECT_MCA_VERSION_2_1_0.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
