Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
This commit looks larger than it really is since it includes a fair amount of code cleanup.
The SIGSTOP/SIGCONT+checkpointing work uses some of the functionality in r20391. Basic use case below (note that the checkpoint generated is useable as usual if the stopped application is terminated).
{{{
shell 1) mpirun -np 2 -am ft-enable-cr my-app
... running ...
shell 2) ompi-checkpoint --stop -v MPIRUN_PID
[localhost:001300] [ 0.00 / 0.20] Requested - ...
[localhost:001300] [ 0.00 / 0.20] Pending - ...
[localhost:001300] [ 0.01 / 0.21] Running - ...
[localhost:001300] [ 1.01 / 1.22] Stopped - ompi_global_snapshot_1234.ckpt
Snapshot Ref.: 0 ompi_global_snapshot_1234.ckpt
shell 2) killall -CONT mpirun
... Application Continues execution in shell 1 ...
}}}
Other items in this commit are mostly cleanup that has been sitting off-trunk for too long:
* Add a new {{{opal_crs_base_ckpt_options_t}}} type that encapsulates the various options that could be passed to the CRS. Currently only TERM and STOP, but this makes adding others ''much'' easier.
* Eliminate ORTE_SNAPC_CKPT_STATE_PENDING_TERM, since it served a redundant purpose with the new options type.
* Lay some basic ground work for some future features.
This commit was SVN r21995.
The following SVN revision numbers were found above:
r20391 --> open-mpi/ompi@0704b98668
* Pass the sequence number of the checkpoint along with reference from the global to the local coordinator.
* 'orte-restart --apponly' now just generates the app context file, and does not run with it. This provides the user the ability to edit the file before launching.
* Add a OPAL_CRS_NONE state
* Split the INC into three distinct parts.
* Implement a restart mechanism for the 'none' component. If given a context it simply execvp()'s it.
This commit was SVN r21195.
This patch contains the following items:
* Fix the flag passed to open() for the read side of the named pipe between the local and app coordinator. There is a race condition when using O_RDWR on a named pipe (not sure how that bug got in there in the first place).
* Adjust control in the C/R thread timing
* Clarify return code in BLCR component
* Allow the user to adjust the max wait time for the named pipes in the FileM local coordinator by using the MCA parameter "snapc_full_max_wait_time" (Default: 20 seconds)
* If the application terminates while there are active FileM operations, force mpirun to wait on these operations to complete.
* Allow the user to set the local copy command (Default: cp) via MCA parameter "filem_rsh_cp"
* Implement the ability to throttle the number of outgoing connections in FileM. At larger scales this type of explicit throttling helps prevent overwhelming the HNP machine. Default: 10, set via MCA parameter: {{{filem_rsh_max_outgoing}}}
This commit was SVN r21167.
The following SVN revision numbers were found above:
r21131 --> open-mpi/ompi@0deb009225
* Improved timing in SnapC Full Global Coordinator
* Improved scalability of the SnapC Full protocol
* Minor improvements to the error reporting mechanisms in SnapC and FileM
* Improved the memory usage of the metadata routines - now the owner of the data is more explicit.
* Added a FileM hint to indicate when files stored locally can be moved to/from a globally mounted file system using just the 'cp' command instead of the 'rcp/scp' command. Slightly improves performance, but not too drastically. Can be set using the following SnapC MCA parameter: {{{snapc_base_global_shared=1}}}
* Implement the ability to throttle the number of outgoing connections in FileM. At larger scales this type of explicit throttling helps prevent overwhelming the HNP machine. Default: 10, set via MCA parameter: {{{filem_rsh_max_outgoing}}}
* Add a few diagnostic/debugging features to SnapC and FileM.
This commit was SVN r21131.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
Adapt orte_process_info to orte_proc_info, and
change orte_proc_info() to orte_proc_info_init().
- Compiled on linux-x86-64
- Discussed with Ralph
This commit was SVN r20739.
Headers should be included in the .c directly.
This commit was SVN r20645.
The following SVN revision numbers were found above:
r20643 --> open-mpi/ompi@e46c512ee7
Only proc_info.h-internal include file is opal/dss/dss_types.h
- In one case (orte/util/hnp_contact.c) had to add proc_info.h again.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
works fine, no errors.
Again, let's have MTT the last word.
This commit was SVN r20631.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
There is still a problem with OpenIB and threads (external to C/R functionality). It has been reported in Ticket #1539
Additionally:
* Fix a file cleanup bug in CRS Base.
* Fix a possible deadlock in the TCP ft_event function
* Add a mca_base_param_deregister() function to MCA base
* Add whole process checkpoint timers
* Add support for BTL: OpenIB, MX, Shared Memory
* Add support Mpool: rdma, sm
* Sundry bounds checking an cleanup in some scattered functions
This commit was SVN r19756.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
* Remove the opal_only option. This was suffering from bit rot, and no one uses it. It can be added back fairly easily if wanted.
* Cleanup metadata interactions at the local level.
* Touch up some of the INC funcitonality (fix typos and a minor ordering issue)
This commit was SVN r18416.
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php
{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}
Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.
Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.
This commit was SVN r18381.
{{{
svn merge -r 18218:18240 https://svn.open-mpi.org/svn/ompi/tmp/jjh-scratch .
}}}
Contains:
* Primarily a fix for a user reported problem where a cached file descriptor is causing a SIGPIPE on restart.
* Cleanup some small memory leaks from using mca_base_param_env_var() - Thanks Jeff
* Cleanup ORTE FT tool compilation in non-FT builds - Thanks Tim P.
* Cleanup mpi interface with missplaced {{{OPAL_CR_ENTER_LIBRARY}}} - Thanks Terry
* Some other sundry cleanup items all dealing with C/R functionality in the trunk.
This commit was SVN r18241.
Only one place used the user name field - session_dir, when formulating the name of the top-level directory. Accordingly, the code for getting the user's id has been moved to the session_dir code.
This commit was SVN r17926.
* Extension to the ESS framework to support C/R
* Fixed support for {{{snapc_base_establish_global_snapshot_dir}}}
* Fixed FileM support
* Misc. minor code modifications
There are some outstanding visability issues that I want to fix next.
This commit was SVN r17725.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
This commit also cleans up the checkpoint and terminate case making it more
precise than before. Previously the application could make a small amount of
progress between checkpoint completion and application termination. Now the
application will make no progress at all in this time span.
Additional minor change:
- Start using OPAL_INT_TO_BOOL instead of if/else logic
This commit was SVN r16952.
