This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
as an argument to a macro which could result in it
being called twice. I did not observe any issues,
but it should be fixed. Also did some minor refactoring
for clarity and following code convention.
This commit was SVN r23886.
This merges the branch containing the revamped build system based around converting autogen from a bash script to a Perl program. Jeff has provided emails explaining the features contained in the change.
Please note that configure requirements on components HAVE CHANGED. For example. a configure.params file is no longer required in each component directory. See Jeff's emails for an explanation.
This commit was SVN r23764.
Also, some other changes to bring the csum PML up
to date with changes that happened in ob1 over the
last two years. This includes a few bug
fixes and some minor refactoring.
This commit was SVN r23757.
* change comm_init API - no need to pass local rank groups, fca calculates that on its own.
* remove local rank list from module - libfca maintains that now.
* in fca_bcast and fca_reduce - pass root rank index and let libfca figure out the local rank index.
This commit was SVN r23716.
of megabytes/s. So we get crazy btl_weights in case of heterogeneous
multirail. And --mca btl_mx_bandwidth <width> cannot work around the
problem (it probably doesn't help because it's overriden by the
runtime link width detection anyway?).
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
This commit was SVN r23712.
update the remain_len field for the buffer.
This really fixes ticket #2532.
This commit was SVN r23706.
The following SVN revision numbers were found above:
r23649 --> open-mpi/ompi@f42c2a737f
Somehow, there's an entire 2nd (identical) copy of the sm btl
configure.m4 in here -- this commit removes the duplicate copy,
leaving only 1 copy of each relevant m4 macro.
Thanks to Ralph for spotting it!
This commit was SVN r23675.
NOTE: mmap is still the default.
Some highlights:
o Silent component failover.
o The sysv component will only be queried for selection if it is placed before
the mmap component (for example, -mca mpi_common_sm sysv,posix,mmap). In the
default case, sysv will never be queried/selected.
o Per some on-list discussion, now unlinking mmaped file in both mmap and posix
components (see: "System V Shared Memory for Open MPI: Request for Community
Input and Testing" thread).
o Assuming local process homogeneity with respect to all utilized shared
memory facilities. That is, if one local process deems a particular shared
memory facility acceptable, then ALL local processes should be able to
utilize that facility. As it stands, this is an important point because one
process dictates to all other local processes which common sm component will
be selected based on its own, local run-time test.
o Addressed some of George's code reuse concerns.
This commit was SVN r23633.
* fixup lookup of supported ops by name:
in ompi 1.5.x the op string representation were changed from MPI_XXX to MPI_OP_XXX (relative to OMPI 1.4.x)
* keep compat between diff versions of FCA
* better error handling (return error if symbol not found)
* register to opal_progress and call fca_progress API
This commit was SVN r23597.
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
status structure or the _ucount field in the status structure.
On 64-bit sparc, the macros resolve into integer array assignments.
For all others, they are just simple assignments. This fixes
possible BUS errors seen when running on the SPARC processor.
This bug was introduced when the _count field changed from an int
into a size_t. See the changes to request.h for additional details.
This commit fixes trac:2514.
This commit was SVN r23554.
The following Trac tickets were found above:
Ticket 2514 --> https://svn.open-mpi.org/trac/ompi/ticket/2514
step is the configure and Fortran mojo that Jeff will put in. Until then I
guess the Fortran interface is broken (at least all functions using the hidden
count firld in the MPI_Status).
This commit was SVN r23467.
operations, not ints.
Sorry for the mid-day configure.ac change, folks...
This commit was SVN r23449.
The following Trac tickets were found above:
Ticket 2472 --> https://svn.open-mpi.org/trac/ompi/ticket/2472
Create an ability to store the contact info for multiple HNPs being used to route between different job families. Modify the dpm orte module to pass the resulting store during the connect_accept procedure so that all jobs involved in the resulting communicator know how to route OOB messages between them.
Add a test provided by Philippe that tests this ability.
This commit was SVN r23438.
case individual entries aren't used, but dynamic rules are enabled
(i.e., at least one or more of them are not NULL, meaning that they'll
all be assumed to be either NULL or a valid value).
This commit was SVN r23361.
#define CACHE_LINE_SIZE to 128. This name has a conflict on NetBSD,
and it seems kinda odd to have a header file that ''only'' defines a
single value. Also, we'll soon be raising hwloc to be a first-class
item, so having this file around seemed kinda weird.
Therefore, I replaced CACHE_LINE_SIZE with opal_cache_line_size, an
int (in opal/runtime/opal_init.c and opal/runtime/opal.h) on the
rationale that we can fill this in at runtime with hwloc info (trunk
and v1.5/beyond, only). The only place we ''needed'' a compile-time
CACHE_LINE_SIZE was in the BTL SM (for struct padding), so I made a
new BTL_SM_ preprocessor macro with the old CACHE_LINE_SIZE value
(128). That use isn't suitable for run-time hwloc information,
anyway.
This commit was SVN r23349.
Configure Option:
--enable-sysv
MCA Parameter:
mpi_common_sm
mpi_common_sm accepts a comma delimited list of: [sysv],mmap (order
dependent). The first component that is successfully selected is used. For
example, -mca mpi_common_sm sysv,mmap will first try sysv. If sysv is not
successfully selected, then mmap will be used. mmap will be used if
mpi_common_sm is not provided.
Notes:
Please make certain that your system's shmmax limit, or equivalent, is larger
than mpool_sm_min_size. Otherwise, shmget may fail.
This commit was SVN r23260.
At this point, it is just cleared (and ignored) so default behavior has not changed.
However, future failover support can take advantage of this flag.
Reviewed by Pasha Shamis.
This commit was SVN r23204.
make sure that we do not call coll_gather and coll_bcast in the very same
instances, since some collective (intra) modules do not seem to like the fact
if they are called for scount or rcount being zero (for regular
intra-communicator operations, this is handled on the MPI API layer).
Fixes trac:2405
This commit was SVN r23188.
The following Trac tickets were found above:
Ticket 2405 --> https://svn.open-mpi.org/trac/ompi/ticket/2405
allows the BTL to specify a specific ompi_proc_t that had an
error. Also add an optional descriptive string. Currently, arguments
are not used but will be by future failover PML.
Changes based on RFC. Reviewed by George Bosilca.
This commit was SVN r23174.
The fix is to just check if the return value is positive or not, since all the SOS encoded errors are *always* negative.
The real fix (as Ralph points out) is to change these functions (opal_pointer_array_add and mca_base_param*) to return the index as a pointer.
This commit was SVN r23173.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
http://marc.info/?l=linux-mm-commits&m=127352503417787&w=2 for more
details.
* Remove the ptmalloc memory component; replace it with a new "linux"
memory component.
* The linux memory component will conditionally compile in support
for ummunotify. At run-time, if it has ummunotify support and
finds run-time support for ummunotify (i.e., /dev/ummunotify), it
uses it. If not, it tries to use ptmalloc via the glibc memory
hooks.
* Add some more API functions to the memory framework to accomodate
the ummunotify model (i.e., poll to see if memory has "changed").
* Add appropriate calls in the rcache to the new memory APIs to see
if memory has changed, and to react accordingly.
* Add a few comments in the openib BTL to indicate why we don't need
to notify the OPAL memory framework about specific instances of
registered memory.
* Add dummy API calls in the solaris malloc component (since it
doesn't have polling/"did memory change" support).
This commit was SVN r23113.
ompi_ptr_t by translating into void*. Instead keep it as an ompi_ptr_t all
the way. Thanks to Timur Magomedov for helping to track down this issue and
test the patch.
cmr:v1.4
cmr:v1.5
This commit was SVN r23030.
1. fix a bug that caused an infinite loop in configure when specifying want-ft but not want-ft-thread by removing a stale reference to the opal-progress-thread option
2. add want-ft=orcm so we can build the orcm errmgr component
3. cleanup the use of "ompi_want_ft_xxx" and replace it with "opal_want_ft_xxx" so that naming conventions are preserved
This commit was SVN r22885.
Remove the --enable-progress-threads option as this is no longer functional, and hardcode OPAL_ENABLE_PROGRESS_THREADS to 0.
Replace the --enable-mpi-threads option with --enable-mpi-thread-multiple as this is clearer as to meaning. This option automatically turns "on" opal thread support if it wasn't already so specified. If the user specifies --disable-opal-multi-threads --enable-mpi-thread-multiple, we will error out with a message
Add a new --enable-opal-multi-threads option that turns "on" opal thread support without doing anything wrt mpi-thread-multiple
This commit was SVN r22841.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
Short version: there is a bug in OS X/Snow Leopard, but there is also
a bug in Open MPI. Fixing the bug in Open MPI is both trivial (a
1-line change) and avoids the bug in OS X. We'll file an OS X bug
report upstream with Apple, but it should no longer affect us here in
OMPI.
Fixes trac:2039.
More details:
Some background first:
1. IPv4 sockets can only accept incoming IPv4 connections. However,
IPv6 sockets can be configured to accept ''only'' incoming IPv6
connection, or ''both'' incoming IPv4 and IPv6 connections. An
IPv6 socket attribute sets which listening behavior is used.
1. IPv4 and IPv6 have different port namespaces. Hence, it is
permissable to bind a v4 socket to port X ''and'' also bind a v6
socket to that same port X on the same interface (assuming that
the v6 socket is only accepting incoming v6 connections).
Incoming v4 connections to port X on the interface should get
matched to the listening v4 socket; incoming v6 connections should
get matched to the listening v6 socket.
1. When v6 sockets accept ''both'' incoming v4 and v6 connections, it
should claim port X in both namespaces.
1. Linux's default behavior is to only allow one listening socket to
be bound to a given port (i.e., ''either'' a v6 or v4 socket to be
bound to a single port X -- not both). A v6 socket can listen for
both v4 and v6 incoming connections on that port, but still --
only one socket will be bound to that port.
1. Snow Leopard's default behavior is to share ports -- i.e., let
both a v4 and a v6 listening socket to be bound to port X
(assuming that the v6 socket is only accepting incoming v6
connections).
The TCP BTL creates a listening socket for each address family.
Hence, it creates a v4 listening socket on INADDR_ANY and a v6
listening socket on the v6 equivalent of INADDR_ANY. OMPI then
iteratively tries to find ports to listen on within the range of
[mca_btl_tcp_port_min, mca_btl_tcp_port_min + mca_btl_tcp_port_range).
On Linux, the v4 socket will be bound to port X and the v6 socket will
likely be bound to port Y (where X != Y). On Snow Leopard, the v4
socket will be bound to port X and the v6 socket may ''also'' be bound
to port X. Since the namespaces are separate, this shouldn't be a
problem.
However, Open MPI was accidentally setting the v6 listening behavior
to accept ''both'' v4 and v6 incoming connections. This is a trivial
thing to fix -- change a 0 to a 1 in the code. On Linux, this issue
didn't matter because the v4 and v6 sockets were on different ports.
So even though the v6 socket ''would'' have accepted incoming v4
connections, that never happened because OMPI would direct v4
connections to the v4 port.
But on Snow Leopard, the v4 and v6 listening ports could end up
sharing the same port number. As mentioned above, this ''shouldn't''
have been a problem, but it looks like Snow Leopard has the following
bugs:
* If a v4 socket is already bound to port X, we're pretty sure that a
v6 socket with the "accept both v4 and v6 incoming connections"
listening behavior should not be able to claim port X (because
there's already a v4 socket listening on X). However, Snow Leopard
would allow binding a v4 socket to port X, and then allow a v6
socket configured to allow incoming v4 and v6 connections to
''also'' be bound to port X.
* After binding the v6 socket to port X, Snow Leopard then lets
''another'' v4 socket ''also'' get bound to port X. Hence, there's
now '''three''' sockets all listening on port X.
This obviously led to mis-matched TCP connections, and things went
downhill from there.
That being said, Snow Leopard doesn't exhibit this behavior if v6
sockets only allow incoming v6 connections. And technically, that is
exactly the behavior we want (we want v6 sockets to only accept
incoming v6 connections). So if we just change the flag to make our
v6 listening socket us this behavior, the problem on OS X goes away.
That's what this commit does -- it changes a 0 to a 1, indicating
"only let this v6 socket allow incoming v6 connections."
That was simple, wasn't it?
This commit was SVN r22788.
The following Trac tickets were found above:
Ticket 2039 --> https://svn.open-mpi.org/trac/ompi/ticket/2039
1. The code that looks at btl_tcp_if_exclude before doing a
modex_send uses strcmp rather than strncmp. That means that
"lo0" gets sent even though "lo" is excluded.
2. The code that determines whether a particular local TCP
interface can connect to a particular remote interface doesn't
check for loopback interfaces. With this fix, users can now
enable "lo" and be assured that it will only be used for intra-
node communication.
This commit was SVN r22762.
btl_openib_ip.*. The routines in these files are not specific to
iwarp -- they are specific to IP interfaces used with IBV devices
(even IB or IBoE/RoCEE/whatever devices).
This commit was SVN r22718.
issues with iwarp.c. These fixes are needed for IBoE / ROCEE /
whateveritscalledtoday. I added a few minor changes to his base
patch.
This commit was SVN r22717.
mca_osc_rdma_component.c_modules in ompi_osc_rdma_windx_to_module
Fixes case where there is unprotected access to
mca_osc_rdma_component.c_modules in ompi_osc_rdma_windx_to_module
This commit was SVN r22700.
INTERNAL to EXTRA_RETAIN, because not all "internal" communicators
have this flag set (only internal communicators with CIDs less than
their parent). Hence, what this flag ''really'' means is that there
was an extra RETAIN performed on it. So name the flag just that --
EXTRA_RETAIN -- indicating that an extra RETAIN has occurred.
This commit was SVN r22690.
The following SVN revision numbers were found above:
r22671 --> open-mpi/ompi@61dee816db
can occur ( fixes trac:2111 ).
Should not deregister memory with the rcache lock held otherwise a deadlock can occur as the lower
level infiniband libraries can free memory ( fixes trac:2110 )
cmr:v1.4
This commit was SVN r22683.
The following Trac tickets were found above:
Ticket 2110 --> https://svn.open-mpi.org/trac/ompi/ticket/2110
Ticket 2111 --> https://svn.open-mpi.org/trac/ompi/ticket/2111
as this can result in a low level free of memory which
can require the rcache lock resulting in a deadlock
This fixes trac:2107
cmr:v1.4
This commit was SVN r22679.
The following Trac tickets were found above:
Ticket 2107 --> https://svn.open-mpi.org/trac/ompi/ticket/2107
when protecting the no_wqe_pending_frags list.
fixes trac:2118 add cmr:v1.4
This commit was SVN r22678.
The following Trac tickets were found above:
Ticket 2118 --> https://svn.open-mpi.org/trac/ompi/ticket/2118
Also includes some minor copytight header additions that were missed in previous checkins
fixes trac:2101 added cmr:v1.4
This commit was SVN r22676.
The following Trac tickets were found above:
Ticket 2101 --> https://svn.open-mpi.org/trac/ompi/ticket/2101
communicator that we created has a lower CID than the parent comm. This can
happen when using the hierarch collective communication module or for
inter-communicators (since we make a duplicate of the original communicator).
This is not a problem as long as the user calls MPI_Comm_free on the parent
communicator. However, if the communicators are not freed by the user but
released by Open MPI in MPI_Finalize, we walk through the list of still
available communicators and free them one by one. Thus, local_comm is freed
before the actual inter-communicator. However, the local_comm pointer in the
inter communicator will still contain the 'previous' address of the local_comm
and thus this will lead to a segmentation violation. In order to prevent that
from happening, we increase the reference counter local_comm by one if its CID
is lower than the parent. We cannot increase however its reference counter if
the CID of local_comm is larger than the CID of the inter communicators, since
a regular MPI_Comm_free would leave in that the case the local_comm hanging
around and thus we would not recycle CID's properly, which was the reason and
the cause for this trouble.
This commit fixes tickets 2094 and 2166. Note however, that I want to close
them manually, since a slightly different patch is required for the 1.4
series. This commit will have to be applied for the 1.5 series. And I will
need a volunteer to review it.
This commit was SVN r22671.
other process should ignore this value. Thanks to Michael Hofmann
for investigating this issue.
This commit closes trac:2268.
This commit was SVN r22639.
The following Trac tickets were found above:
Ticket 2268 --> https://svn.open-mpi.org/trac/ompi/ticket/2268
If file does not exist, check the directory it lives in...
Maybe used by caller, trying to open mmap() on NFS, Lustre or
Panasas (thanks Sam).
For now, this is used to warn about the usage of mmap on such FS.
Please note, that Ralph mentioned the orte_no_session_dir parameter.
The help message includes a reference to this.
Tested on NFS and Lustre on Linux on
smoky: mpirun --mca orte_tmpdir_base $HOME/tmp -np 2 ./mpi_stub
jaguar: mpirun ... --mca orte_tmpdir_base /tmp/work/$USER ...
Fixes trac:1354
This should cmr:v1.5 once it has soaked and is shown to work on
Solaris
This commit was SVN r22604.
The following Trac tickets were found above:
Ticket 1354 --> https://svn.open-mpi.org/trac/ompi/ticket/1354
long-standing bugs (see trac ticket list below). They're currently
somewhat obscure bugs, but are becoming much more relevant in a world
where OpenFabrics devices fail and you replace them with a newer model
(i.e., the cluster is homogeneous... ''except'' for where you had to
replace one or two OpenFabrics devices, and the same model is no
longer available).
This commit includes a '''lengthy''' comment (that we spent a lot of
time writing!) about what exactly it does and does not do. The
previous code was rather short and '''incredibly''' subtle. The new
code is slightly longer, but is both much more explicit and much more
painstakingly documented.
This commit fixes multiple trac tickets. The real one that we fix is
#1707; the others are fixed as a side-effect. In short: fixing #1707
prevents Bad Things from happening later in the startup sequence.
Fixes trac:1707, #2164, #1574.
cmr:v1.4.2:reviewer=pasha
cmr:v1.5:reviewer=pasha
This commit was SVN r22592.
The following Trac tickets were found above:
Ticket 1707 --> https://svn.open-mpi.org/trac/ompi/ticket/1707
Add a ''map_bynode'' info key to determine if the job to be started by comm_spawn* should be mapped by node or by slot. Default is to map according to the default policy set when the parent job was started.
cmr:v1.5.1
This commit was SVN r22564.
In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.
This commit was SVN r22405.
than can be used (e.g., number of on-node peers), that no additional
room is set aside for those FIFOs that will never be created. This
makes it easier to have dedicated FIFOs: just set btl_sm_num_fifos
to be very large rather than setting it to be the local number of
procs. In practice, we ask for extra headroom anyhow, so this change
generally won't matter.
This commit was SVN r22291.
other request-using frameworks.
- Rather than having mpi/c/* functions allocate requests explicitly,
pass the MPI_Request* down to the I/O component and have it
perform the allocation.
- While the I/O base provides a base request which can be used,
it is not required and all request management occurs within
the component.
- Push progress management into the component, rather than having it
happen in the base. Progress functions are now easily registered,
and not all (ie, the one existing) components use progress functions
in any rational way.
ROMIO switched to generalized requests instead of MPIO_Requests many
moons ago, and Open MPI now uses ROMIO's generalized requests, so there
is no reason to wrap those requests (which are OMPI requests) in another
level of request.
Now the file function passes the MPI_Request* to the ROMIO component,
which passes it to the underlying ROMIO function, which calls
MPI_Grequest_start to create an OMPI request, which is what gets set
as the request to the user. Much cleaner.
This patch has two motivations. One, a whole heck of a lot of code
just got removed, and request handling is now much cleaner for I/O
components. Two, by adding support for Argonne's proposed generalized
request extensions, we can allow ROMIO to provide async I/O through
generalized requests, which we couldn't rationally do in the old
setup due to the crazy request completion rules.
This commit was SVN r22235.
use the new Automake "silent rules" if available.
If you are using an Automake prior to v1.11, you won't see the new
silent rules -- it will automatically default back to the "verbose"
rules.
Note, too, that even with these changes, you can enable the verbose
"make all" output in one of two ways:
1. Add "V=1" to your "make" command line
{{{
shell$ make all V=1
}}}
2. Add "--disable-silent-rules" to your "configure" command line:
{{{
shell$ ./configure --disable-silent-rules ...
}}}
The one down side of using the silent rules by default is that we'll
get less diagnostic information when users send their build logs. I
think we should update the web page to request that users send build
logs of "make V=1", but I'm guessing that not everyone will do it.
Note that I did ''not'' silent-ize the libltdl build (which is a dozen
or so files in the beginning of the build) because we wholly import
libltdl at autogen time. I therefore didn't want to patch libltdl
(further) after importing it a) to remain as forward- compatible as
possible, and b) patching the imported libltdl build system might be
tricky in terms of timestamps / dependencies. So those dozen-or-so
files will still be "verbose", but the rest of the files in OMPI will
be "silent".
This commit was SVN r22189.
area, we cap the size at LONG_MAX. But we are figuring out how much
we need. So, if that amount exceeds LONG_MAX, we should return an
"out of resource" error code.
This commit was SVN r22172.
This commit does a bunch of things:
* Address all remaining code review items from CMR #2023:
* Defer mmap setup to be lazy; only set it up the first time we
invoke a collective. In this way, we don't penalize apps that
make lots of communicators but don't invoke collectives on them
(per #2027).
* Remove the extra assignments of mca_coll_sm_one (fixing a
convertor count setup that was the real problem).
* Remove another extra/unnecessary assignment.
* Increase libevent polling frequency when using the RML to
bootstrap mmap'ed memory.
* Fix a minor procs-related memory leak in btl_sm.
* Commit a datatype fix that George and I discovered along the way to
fixing the coll sm.
* Improve error messages when mmap fails, potentially trying to
de-alloc any allocated memory when that happens.
* Fix a previously-unnoticed confusion between extent and true_extent
in coll sm reduce.
This commit was SVN r22049.
The following Trac tickets were found above:
Ticket 2023 --> https://svn.open-mpi.org/trac/ompi/ticket/2023
shmem progress (or the Windows equiv). Instead, poll hard on the
condition, but periocially call opal_progress(). This allows
badly-formed apps (e.g., the ibm test communicator/bsend_free) to
actually complete.
To be clear, there are far too many apps out there that assume that
MPI collectives will actually progress the rest of MPI. I don't like
putting in a feature to enable broken apps, but I have a dim
recollection of this issue coming up before (apps "hanging" when
testing the sm coll because they assumed that calling collectives
would trigger other MPI progress). Rather than have people claim that
OMPI is broken, I prefer to put in this "workaround". :-(
Indeed, the bsend_free test ''may'' be coded that way for exactly that
reason...? I don't remember offhand...
This commit was SVN r21984.
This commit fixes the ft_event logic so that it uses the normal destroy funcitonality instead of the workaround with the component that was previously there. All and all it made for cleaner code, which is always good.
If r21967 moves to v1.3, this patch will need to be moved as well.
This commit was SVN r21972.
The following SVN revision numbers were found above:
r21967 --> open-mpi/ompi@533633b8cb
Before this, we would restore the topmost old session directory. This commit makes sure that we remove it when we are done with it.
This commit was SVN r21971.
in the v1.2 series the cid's could never go above the max. allowed for a
particular pml. Because of that, pml_add_comm never checked for the cid, and
in fact pml_add_comm was called in comm_set, which is *before* we knew the
cid.
in the v1.3 series (and trunk) we check now the cid to detect overflow, and
because of that pml_add_comm has been moved *after* the cid allocation
routine, namely into the comm_activate routine.
in the v1.2 series, the comm_activate contained a synchronization step of the
old communicator in order to prevent incoming fragments on the new
communicator, with the main problem being that the allreduce in the
communicator allocation finished at different times on different processes,
and thus, this scenario could and did really occur.
in the v1.3 series, the comm_activate does not contain the synchronization
step anymore, since we introduced the new queue for fragments with unknown
cid. The problem is however, that whether a fragment is known or not is
decided by using ompi_comm_lookup(), which will return something useful as
soon as the cid allocation finished, even before pml_add_comm has been
called. So there is a small time gap where we will not post a message into
queue for unknown cid's, but we can also not look up the process structure
belonging to the rank in that comm ( that is in pml_ob1_match_recv_frag or
something like that).
The current fix reintroduces the synchronization step in comm_activate, and
ensures that no fragment can be received for a new communicator before the
synchronization occurs , and thus comm_nextcid() and pml_add_comm has been
called. It seems to be the safest and easiest way for now. Welcome back, v1.2.
This commit was SVN r21970.
* Various cosmetic/style updates in the btl sm
* Clean up concept of mpool module (I think that code was written way
back when the concept of "modules" was fuzzy)
* Bring over some old fixes from the /tmp/timattox-sm-coll/ tree to
fix potential segv's when mmap'ed regions were at different
addresses in different processes (thanks Tim!).
* Change sm coll to no longer use mpool as its main source of shmem;
rather, just mmap its own segment (because it's fixed size --
there was nothing to be gained by using mpool; shedding the use of
mpool saved a lot of complexity in the sm coll setup). This
effectively made Tim's fixes moot (because now everything is an
offset into the mmap that is computed locally; there are no global
pointers). :-)
* Slightly updated common/sm to allow making mmap's for a specific
set of procs (vs. ''all'' procs in the process). This potentially
allows for same-host-inter-proc mmaps -- yay!
* Fixed many, many things in the coll sm (particularly in reduce):
* Fixed handling of MPI_IN_PLACE in reduce and allreduce
* Fixed handling of non-contiguous datatypes in reduce
* Changed the order of reductions to go from process (n-1)'s data
to process 0's data, because that's how all other OMPI coll
components work
* Fixed lots of usage of ddt functions
* When using a non-contiguous datatype, if the root process is not
(n-1), now we used a 2nd convertor to copy from shmem to the rbuf
(saves a memory copy vs. what was done before)
* Lots and lots of little cleanups, clarifications, and minor
optimizations (although still more could be done -- e.g., I think
the use of write memory barriers is fairly sub-optimal; they
could be ganged together at the root, for example)
I'm marking this as "fixes trac:1988" and closing the ticket; if something
is still broken, we can re-open the ticket.
This commit was SVN r21967.
The following Trac tickets were found above:
Ticket 1988 --> https://svn.open-mpi.org/trac/ompi/ticket/1988
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
http://www.open-mpi.org/community/lists/devel/2009/08/6618.php
lower the default priority of PML/cm to allow _defined_ behaviour
for systems, where both MTLs and BTLs are available (Portals and MX).
Keep the previous behaviour of favoring in case of PSM.
Still, the user may select --mca pml cm for apps where applicable.
This commit was SVN r21834.
now are able to use the dynamic rules. Moreover, these rules are loaded only once,
and stored at the component level. All communicators are able to use these rules
(not only MPI_COMM_WORLD as until now).
A lot of minor corrections, memory management issues and reduction in the amount
of memory used by the tuned collectives.
This commit was SVN r21825.
