Place the content of common_ucx_int.h back to the common_ucx.h and
include common_ucx_wpool.h explicitly.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
Worker Pool is an object containing/managing a set of UCX workers
and providing access to those workers through a smal interface
to allow Multi-Threaded applicatoins to access multiple HW contexts.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
We've been fighting the battle of trying to create a regex generator and
parser that can handle arbitrary hostname schemes - without long-term
success. The worst of it is that there is no way of checking to see if
the computed regex is correct short of parsing it and doing a
character-by-character comparison with the original string. Ugh...there
has to be a better solution.
One option is to investigate using 3rd-party regex libraries as
those are coming from communities whose sole focus is resolving that
problem. However, someone would need to spend the time to investigate
it, and we'd have to find a license-friendly implementation.
Another option is to quit beating our heads against the wall and just
compress the information. It won't be as much of a reduction, but we
also won't keep hitting scenarios where things break. In this case, it
seems that "perfection" is definitely the enemy of "good enough".
This PR implements the compression option while retaining the
possibility of people adding regex-generating components. The
compression code used in ORTE is consolidated into the opal/compress
framework. That framework currently held bzip and gzip components for
use in compressing checkpoint files - since we no longer support C/R, I
have .opal_ignore'd those components.
However, I have left the original framework APIs alone in case someone
ever decides to redo C/R. The APIs of interest here are added to the
framework - specifically, the "compress_block" and "decompress_block"
functions. I then moved the ORTE zlib compression code into a new
component in this framework.
Unfortunately, the framework currently is a single-select one - i.e.,
only one active component at a time. Since I .opal_ignore'd the other
two and made the priority of zlib high, this isn't a problem. However,
if someone wants to re-enable bzip/gzip or add another component, they
might need to transition opal/compress to a multi-select framework.
Included changes:
* Consolidate the compression code into the opal/compress framework
* Move the ORTE zlib compression code into a new opal/compress/zlib
component
* Ignore the bzip and gzip components in opal/compress framework
* Add a "compress_base_limit" MCA param to set the threshold above which
we compress data - defaults to 4096 bytes
* Delete stale brucks and rcd components from orte/grpcomm framework
* Delete the orte/regx framework
* Update the launch system to use opal/compress instead of string regex
* Provide a default module if no zlib is available
* Fix some misc multi-node issues
* Properly generate the nidmap in response to a "connection warmup"
message so the remote daemon knows the children it needs to launch.
* Remove stale references to orte_node_regex
* opal_byte_object_t's are not OPAL objects - properly release allocated
memory.
* Set the topology
* Currently only handling homogeneous case
* Update the compress framework files to conform
* Consolidate open/close into one "frame" file. Ensure we open/close the
framework
Signed-off-by: Ralph Castain <rhc@pmix.org>
It never lived up to its purpose (and has caused amorphous indirect
errors such as https://github.com/open-mpi/ompi/issues/2519), so
delete it.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Update the OPAL_CHECK_OFI configury macro:
- Make it safe to call the macro multiple times:
- The checks only execute the first time it is invoked
- Subsequent invocations, it just emits a friendly "checking..."
message so that configure output is sensible/logical
- With the goal of ultimately removing opal/mca/common/ofi, rename the
output variables from OPAL_CHECK_OFI to be
opal_ofi_{happy|CPPFLAGS|LDFLAGS|LIBS}.
- Update btl/ofi, btl/usnic, and mtl/ofi for these new conventions.
- Also, don't use AC_REQUIRE to invoke OPAL_CHECK_OFI because that
causes the macro to be invoked at a fairly random time, which makes
configure stdout confusing / hard to grok.
- Remove a little left-over kruft in OPAL_CHECK_OFI, too (which
resulted in an indenting change, making the change to
opal_check_ofi.m4 look larger than it really is).
Thanks Alastair McKinstry for the report and initial fix.
Thanks Rashika Kheria for the reminder.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Now that all components that use libibverbs are gone, remove
OPAL_CHECK_VERBS and the confusingly-named OPAL_CHECK_OPENFABRICS
(which really just checked for verbs things -- not all the possible
OpenFabrics APIs/libraries).
The only code left in Open MPI that calls verbs is hwloc -- and that's
just the APIs that takes an IBV device and returns topological
information about it. Since nothing in the Open MPI code base uses
the "ibv_*" API any more, we have no need for this hwloc functionality
so we'll even remove the --with-verbs configure options.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The verbs and verbs_usnic components are now no longer necessary / no
longer used anywhere in the code base.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
So long BTL openib! After many years of (mostly) faithful service, it
is time to remove the openib BTL. It has been fully replaced by other
components, such as the UCX PML and OFI MTL.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
PMIx is removing the --enable-embedded-libevent and
--enable-embedded-hwloc flags as they are confusing users. Instead, we
will use the --enable-embedded-mode to handle both of these options.
Update the embedded configury to handle it.
Signed-off-by: Ralph Castain <rhc@pmix.org>
It doesn't seem like the BTL was using uninitialized pointer. But simply
setting the rcache pointer to NULL after destroying it makes the valgrind
errors go away.
Fixes Issue #6345
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
... and add `MPI_COMPLEX4`.
This commit changes values of existing `OMPI_DATATYPE_MPI_*` macros.
This change does not affect ABI compatibility of `libmpi.so` and the
like because these values are only used in OMPI internal code.
On the other hand, `ompi_datatype_t::id` values of existing datatypes
are not changed and 73 is newly assigned to for `MPI_COMPLEX4` to
retain ABI compatibility.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
... and `ompi_mpi_c_short_float_complex` and `ompi_mpi_cxx_sfltcplex`.
These are Open MPI internal variables intended to be defined as
`MPI_SHORT_FLOAT`, `MPI_C_SHORT_FLOAT_COMPLEX`, and
`MPI_CXX_SHORT_FLOAT_COMPLEX` in the future.
`OMPI_DATATYPE_MPI_C_SHORT_FLOAT_COMPLEX` is also required to
support `MPI_COMPLEX4` in the next commit.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
The type `short float`, which is proposed in ISO/IEC JTC 1/SC 22 WG 14
(C WG), is not supported by most compilers yet. But some compilers
(including gcc 7 for AArch64 and clang 6) support `_Float16`, which
is defined in ISO/IEC TS 18661-3:2015 (ISO/IEC JTC 1/SC 22/WG 14 N1945)
as an extensions for C. If it is detected in `configure`, it is used
as an alternate type of `short float` in Open MPI internal code.
This commit adds a `configure` option `--enable-alt-short-float=TYPE`.
It can be used to specify a type other than `short float` and `_Float16`
as the alternate type.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
The type `short float` is proposed for the C language in ISO/IEC JTC
1/SC 22 WG 14 (C WG) for mainly IEEE 754-2008 binary16, a.k.a.
half-precision floating point or FP16.
By this commit, `short float` and `short float _Complex` are detected
in `configure` and used in Open MPI internal code. `MPI_SHORT_FLOAT`
and its complex number version are not added yet.
This commit changes values of existing `OPAL_DATATYPE_*` macros.
This change does not affect ABI compatibility of `libmpi.so` and the
like because these values are only used in OPAL and OMPI internal code.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
Reset ptypes when cloning a datatype in order to prevent
a double free() in the opal_datatype_t destructor.
This fixes a bug introduced in open-mpi/ompi@7c938f070fFixesopen-mpi/ompi#6346
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
The issue was a little complicated due to the internal stack used in the
convertor. The main issue was that in the case where we run out of iov
space to save the raw description of the data while hanbdling a
repetition (loop), instead of saving the current position and bailing out
directly we reading of the next predefined type element. It worked in
most cases, except the one identified by the HDF5 test. However, the
biggest issue here was the drop in performance for all ensuing calls to
the convertor pack/unpack, as instead of handling contiguous loops as a
whole (and minimizing the number of memory copies) we copied data
description by data description.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
