* Remove unused declaration
* remove unused variable warning when not using progress threads
* If we're using progress threads, we want to lock, not trylock
when in progress, since it was called from the wakeup thread
and not the progress function
This commit was SVN r14739.
to do while(...) { } then we can't change the variables in the ...
atomically, but should do it while holding the module lock.
* Fix dumb communicator creation error when we don't create the progress
stuff (because a window already exists), where we would accidently
jump to the error case.
This commit was SVN r14715.
* Combine polling of the long requests and buffer requests into
one type, and in one place
* Associate the list of requests to poll with the component, not
the individual modules
* add progress thread that sits on the OMPI request structure
and wakes up at the appropriate time to poll the message
list. Not the best, but without some asynch notification
from the PML that a given set of requests has completed, there
isn't much better
* Instead of calling opal_progress() all over the place, move
to using the condition variables like the rest of the project.
Has the advantage of moving it slightly futher along in the
becoming thread safe thing
* Fix a problem with the passive side of unlock where it could
go recursive and cause all kinds of problems, especially
when progress threads are used. Instead, have two parts of
passive unlock -- one to start the unlock, and another to
complete the lock and send the ack back. The data moving
code trips the second at the right time.
This commit was SVN r14703.
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
it kills ROMIO and one-sided performance when using only TCP. The problem
is that it only allows those two to be progressed every couple of seconds,
leading to what looks like hangs in the one-sided tests (and the ROMIO stuff,
although people seem to not notice that at this point).
This commit was SVN r14142.
The following SVN revision numbers were found above:
r14073 --> open-mpi/ompi@64fbbc20b8
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
so there's no longer a race there (I used to do the unlock request last, after local completion of all the
requests completed, to try to avoid having the passive side reply to the active side, but I don't do that
anymore). The unlock side will not "unlock" the window until it actually receives the correct number of results,
so we're good there.
This fixes an issue where we would receive data on the remote side we weren't expecting that could cause
us to release a lock before it really should have been released to the requesting peer. It could also
cause a deadlock if one of the processes trying to unlock was "self", as that would result in the active
unlock never sending the unlock request, even though it sent the payload, which could cause a counter
that should always be positive to hit -1, causing an infinite loop that could only be solved by
popping up the stack, which was an impossibility.
Refs trac:785
This commit was SVN r13160.
The following Trac tickets were found above:
Ticket 785 --> https://svn.open-mpi.org/trac/ompi/ticket/785
during their send calls by dropping the loop through the list of pending control messages if any are marked
as completed.
Refs trac:784
This commit was SVN r13159.
The following Trac tickets were found above:
Ticket 784 --> https://svn.open-mpi.org/trac/ompi/ticket/784
Otherwise, we end up recursively calling into the progress functions
and corrupting a list that doesn't like to be corrupted.
Refs trac:561
This commit was SVN r13138.
The following Trac tickets were found above:
Ticket 561 --> https://svn.open-mpi.org/trac/ompi/ticket/561
side and only let MPI_WIN_UNLOCK return when the passive side has actively
replied that the window is unlocked.
Refs trac:761
This commit was SVN r13118.
The following Trac tickets were found above:
Ticket 761 --> https://svn.open-mpi.org/trac/ompi/ticket/761
* Make sure that the pval always writes to the correct portion of the
lval. This only matters on 32 bit big endian machines.
* On 32 bit machines when assigning to pval, the other 4 bytes of lval
weren't being written, which could lead to bogus data
We use macros so that there aren't casts all over the code and the pval
assignment can occur to the correct 4 bytes. Refs trac:587
This commit was SVN r12974.
The following Trac tickets were found above:
Ticket 587 --> https://svn.open-mpi.org/trac/ompi/ticket/587
* Fix a counter roll-over issue that could result from a large (but
not excessive) number of outstanding put/get/accumulate calls
during a single synchronization issues (Refs trac:506)
* Fix epoch issue with rdma component that would effect PWSC
synchronization (Refs trac:507)
This commit was SVN r12673.
The following Trac tickets were found above:
Ticket 506 --> https://svn.open-mpi.org/trac/ompi/ticket/506
Ticket 507 --> https://svn.open-mpi.org/trac/ompi/ticket/507
* use one-sided datatype check instead of send/receive and check both
the origin and target datatypes
* allow error handler to be set on MPI_WIN_NULL, per standard
* Allow recursive calls into the pt2pt osc component's progress
function
* Fix an uninitialized variable problem in the unlock header
This commit was SVN r12667.
allocation logic is completely done outside the data-type engine (in the PML) there is
no need for any special case inside the data-type engine. There is less arguments for
the ompi_convertor_pack and ompi_convertor_unpack as well (the last field free_after is
not required anymore as there is no memory allocated in the engine itself). This change
affect all components using datatypes. I test most of them, but it might happens that I
miss some ... If it's the case please let me know (don't shoot the pianist!!).
This commit was SVN r12331.
size and diplacement of data-type. After this patch all data can contain size_t bytes
and the displacements are defined as ptrdiff_t. All of the files I was able to compile
have been modified to match this requirement.
This commit was SVN r12146.
where a window was in both the passive and active side of a lock sequence.
Refs trac:488
This commit was SVN r12112.
The following Trac tickets were found above:
Ticket 488 --> https://svn.open-mpi.org/trac/ompi/ticket/488
I do something else" rule screws me up again. If we're in a FENCE, but
not in ACCESS | EXPOSE, put us in ACCESS|EXPOSE, as we are now known we
now in a real Fence epoch. Yay silly MPI standards
Refs trac:441
This commit was SVN r11865.
The following Trac tickets were found above:
Ticket 441 --> https://svn.open-mpi.org/trac/ompi/ticket/441
tell if the remote proc should be in an exposure epoch or not.
Refs trac:325
This commit was SVN r11746.
The following Trac tickets were found above:
Ticket 325 --> https://svn.open-mpi.org/trac/ompi/ticket/325
epoch's control data could overwrite the previous epoch's data because
we were reusing data structures between PW and SC. Instead, we now
have explicit post_msg and complete_msg counters for completion.
refs trac:354
* Only register the rdma osc callback once, as it turns out that some
btls (MX) do somethng more than update a table during the register
call, and each register call sucks up valuable fragments...
This commit was SVN r11745.
The following Trac tickets were found above:
Ticket 354 --> https://svn.open-mpi.org/trac/ompi/ticket/354
long ago) supposed to be used as a cache for accessing the PML procs. But in
all of the PMLs the PML proc contain only one field i.e. a pointer to the ompi_proc.
This pointer can be accessed using the c_remote_group easily. Therefore, there is no
meaning of keeping the PML procs around. Slim fast commit ...
This commit was SVN r11730.
* Print a warning error message if a target is not in an exposure epoch
and an update is received. This results in the app continuing with
that call having never happened, rather than evil hangs.
refs trac:325
This commit was SVN r11514.
The following Trac tickets were found above:
Ticket 325 --> https://svn.open-mpi.org/trac/ompi/ticket/325
can be in both a Post and Start state. Also, the asserts were only
correct assuming that we were never in the post and start state at the
same time, which was obviously silly.
refs trac:303
This commit was SVN r11428.
The following Trac tickets were found above:
Ticket 303 --> https://svn.open-mpi.org/trac/ompi/ticket/303
implemented entirely on top of the PML. This allows us to have a
one-sided interface even when we are using the CM PML and MTLs for
point-to-point transport (and therefore not using the BML/BTLs)
* Old pt2pt component was renamed "rdma", as it will soon be having
real RDMA support added to it.
Work was done in a temporary branch. Commit is the result of the
merge command:
svn merge -r10862:11099 https://svn.open-mpi.org/svn/ompi/tmp/bwb-osc-pt2pt
This commit was SVN r11100.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r10862
r11099
interconnects that provide matching logic in the library.
Currently includes support for MX and some support for
Portals
* Fix overuse of proc_pml pointer on the ompi_proc structuer,
splitting into proc_pml for pml data and proc_bml for
the BML endpoint data
* bug fixes in bsend init code, which wasn't being used by
the OB1 or DR PMLs...
This commit was SVN r10642.
default
* Add ability to start Put and Get requests immediately instead of queuing
until synchronizaion when using Fence. Not entirely sure this is
completely safe, so it must be explicitly enabled by the user, either with
an MCA parameter or info argument to Win_create.
This commit was SVN r9418.
flag, new flags to be included when convertor is initialized
- modified pml/btl module defs and added stub functions for diagnostic
output routines to dump state of queues / endpoints
- updates to data reliability pml
This commit was SVN r9329.
