Adding the implementations of the functions that were removed
from the MPI standard to the build list, regardless of the
state of the OMPI_ENABLE_MPI1_COMPAT.
According to the README, we want the OMPI_ENABLE_MPI1_COMPAT
configure flag to control which MPI prototypes are exposed in
mpi.h, NOT, which are built into the mpi library. Those will
remain in the mpi library until a future major release (5.0?)
NOTE: for the Fortran implementations, we instead define
OMPI_OMIT_MPI1_COMPAT_DECLS to 0 instead of
OMPI_ENABLE_MPI1_COMPAT to 1. I'm not sure why, but
this seems to work correctly.
Also changing the removed MPI_Errhandler_create implementation
to use the non removed MPI_Comm_errhandler_function prototype
(prototype remains unchanged from MPI_Comm_errhandler_fn)
NOTE: This commit is *NOT* a cherry-pick from master, because
on master, we are no longer building those symbols by
default, but on v4.0.x we _ARE_ still building these
symbols by default. This is because the v4.0.x branch
is to remain backwards compatible with v3.0.x, while at
the same time removing the "removed" symbols from mpi.h
(unless the user configures with --enable-mpi1-compatibility)
Signed-off-by: Geoffrey Paulsen <gpaulsen@us.ibm.com>
Commit 89da9651b inadvertantly #if'ed out both deprecated *and*
removed items from mpi.h. The intent was only to #if out items that
have been *removed* from the MPI specification and leave all items
that are merely deprecated.
This commit also re-orders the deleted typedef+functions to be in the
same order as they are listed in MPI-3.1 chapter 17, just to make
verifying/checking the code easier.
Note that --enable-mpi1-compatibility can still be used to restore
prototypes for the items that have been removed from the MPI
specification (e.g., MPI_Address()).
Signed-off-by: Geoffrey Paulsen <gpaulsen@us.ibm.com>
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit b03a39d359)
While we require C99 to build Open MPI, we do not require C99 to build
user MPI applications. As such, we shouldn't have C99-style comments
(i.e., "//"-style) in mpi.h.in.
Thanks to @AdamSimpson for reporting the issue.
This commit simply converts a //-style comment to a /**/-style
comment. No code or logic changes.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit f4b3ccabf7)
When --enable-mpi1-compatibility was specified, the ompi_mpi_ub/lb
symbols were #if'ed out of mpi.h. But the #defines for MPI_UB/LB
still remained. This commit also #if's out the MPI_UB/LB macros when
--enable-mpi1-compatibility is specified.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
(cherry picked from commit 7223334d4d)
Intentionally do not mark some MPI-1 function pointer typedefs as
`__mpi_interface_removed__` because we have to use them in prototyping
some MPI-1 functions when `--enable-mpi1-compatibility` is used.
Fixes#5357.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
so latest ROM-IO can be used with Open MPI.
Note this first and naive implementation does not use the wait_fn callback.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This commit adds a new configure option: --enable-mpi1-compat. Without
this option we will no longer provide APIs, typedefs, and defines that
were removed from the standard in MPI-3.0. This option will exist for
one major release (Open MPI v4.x.x) and then the option and associated
code will be removed in Open MPI v5.x.x. Open MPI has already
internally prepared for this change. Please prepare your codes
accordingly.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
since Open MPI now requires a C99, and ptrdiff_t type is part of C99,
there is no more need for the abstract OPAL_PTRDIFF_TYPE type.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This commit add the following Fortran named constants which are
defined in the MPI standard but are missing in Open MPI.
- `MPI_LONG_LONG` (defined as a synonym of `MPI_LONG_LONG_INT`)
- `MPI_CXX_FLOAT_COMPLEX`
- `MPI_C_BOOL`
And this commit also changes the value of the following Fortran
named constant for consistency.
- `MPI_C_COMPLEX`
`(MPI_C_FLOAT_COMPLEX` is defined as a synonym of this)
Each needs a different solution described below.
For `MPI_LONG_LONG`:
The value of `MPI_LONG_LONG` is defined to have a same value
as `MPI_LONG_LONG_INT` because of the following reasons.
1. It is defined as a synonym of `MPI_LONG_LONG_INT` in
the MPI standard.
2. `MPI_LONG_LONG_INT` and `MPI_LONG_LONG` has a same value
for C in `mpi.h`.
3. `ompi_mpi_long_long` is not defined in
`ompi/datatype/ompi_datatype_module.c`.
For `MPI_CXX_FLOAT_COMPLEX`:
Existing `MPI_CXX_COMPLEX` is replaced with `MPI_CXX_FLOAT_COMPLEX`
bacause `MPI_CXX_FLOAT_COMPLEX` is the right name defined in MPI-3.1
and `MPI_CXX_COMPLEX` is not defined in MPI-3.1 (nor older).
But for compatibility, `MPI_CXX_COMPLEX` is treated as a synonym
of `MPI_CXX_FLOAT_COMPLEX` on Open MPI.
For `MPI_C_BOOL`:
`MPI_C_BOOL` is newly added. The value which `MPI_C_COMPLEX` had
used (68) is assinged for it because the value becomes no longer
in use (described later) and it is a suited position as a datatype
added on MPI-2.2.
For `MPI_C_COMPLEX`:
Existing `MPI_C_FLOAT_COMPLEX` is replaced with `MPI_C_COMPLEX`
and `MPI_C_FLOAT_COMPLEX` is changed to have the same value.
In other words, make `MPI_C_COMPLEX` the canonical name and
make `MPI_C_FLOAT_COMPLEX` an alias of it.
This is bacause the relation of these datatypes is same as
the relation of `MPI_LONG_LONG_INT` and `MPI_LONG_LONG`, and
`MPI_LONG_LONG_INT` and `MPI_LONG_LONG` are implemented like that.
But in the datatype engine, we use `ompi_mpi_c_float_complex`
instead of `ompi_mpi_c_complex` as a variable name to keep
the consistency with the other similar types such as
`ompi_mpi_c_double_complex` (see George's comment in open-mpi/ompi#1927).
We don't delete `ompi_mpi_c_complex` now because it is used in
some other places in Open MPI code. It may be cleand up in the future.
In addition, `MPI_CXX_COMPLEX`, which was defined only in the Open MPI
Fortran binding, is added to `mpi.h` for the C binding.
This commit breaks binary compatibility of Fortran `MPI_C_COMPLEX`.
When this commit is merged into v2.x branch, the change of
`MPI_C_COMPLEX` should be excluded.
- MPI_Compare_and_swap
- MPI_Fetch_and_op
- MPI_Raccumulate
- MPI_Win_detach
Thanks to Michael Knobloch and Takahiro Kawashima for bringing this
to our attention
The definition of MPI_T_pvar_get_index was incorrect. This commit
fixes the definition and adds a missing return code.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit adds support for MPI_Aint_add and MPI_Aint_diff. These
functions are implemented as macros in C (explicitly allowed by
MPI-3.1). The fortran implementations are a similar mess to the
MPI_Wtime implementations.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Using the underlying hardware identification to split
communicators based on locality has been enabled using
the MPI_Comm_Split_Type function.
Currently implemented split's are:
HWTHREAD
CORE
L1CACHE
L2CACHE
L3CACHE
SOCKET
NUMA
NODE
BOARD
HOST
CU
CLUSTER
However only NODE is defined in the standard which is why the
remaning splits are referred to using the OMPI_ prefix instead
of the standard MPI_ prefix.
I have tested this using --without-hwloc and --with-hwloc=<path>
which both give the same output.
NOTE: I think something fishy is going on in the locality operators.
In my test-program I couldn't get the correct split on these requests:
NUMA, SOCKET, L3CACHE
where I suspected a full communicator but only got one.
See https://svn.mpi-forum.org/trac/mpi-forum-web/ticket/377
This ticket adds the following functions to the standard:
- MPI_T_cvar_get_index, MPI_T_pvar_get_index, and MPI_T_category_get_index
The ticket has passed and the functions are part of MPI-3.1 that will
be released sometime later this year. In Open MPI the functions expose
existing internal functionality so they are low-risk to add to 1.8.0. I
will leave it up to Ralph whether he wants to accept these into 1.8.
cmr=v1.8:reviewer=rhc
This commit was SVN r31037.
- Move the ptrdiff_t tests up higher in configure.ac to be with the
rest of the type tests.
- Create new OMPI_FIND_MPI_AINT_COUNT_OFFSET for finding the
corresponding types of MPI_Aint, MPI_Count, and MPI_Offset.
Consolidate all the old C and Fortran tests into this new macro (and
.m4 file).
- Fix Fortran MPI_*_KIND tests that incorrectly keyed off assumed
types (e.g., int64_t) rather than whatever the corresponding C
MPI_Aint, MPI_Count, MPI_Offset types turned out to be.
- Add new logic to ensure that sizeof(MPI_Count) <= sizeof(size_t),
because our entire PML, BTL, and convertor infrastructure requires
this. As a side effect, just like MPI_Offset the same type of
MPI_Count (because MPI_Count has to be able to hold an MPI_Offset,
so we can't let MPI_Offset be larger than a MPI_Count).
This commit was SVN r30776.
The following Trac tickets were found above:
Ticket 4205 --> https://svn.open-mpi.org/trac/ompi/ticket/4205
MPI_Comm_idup.
As part of this work I implemented a basic request scheduler in
ompi/comm/comm_request.c. This scheduler might be useful for more
than just communicator requests and could be moved to ompi/request
if there is a demand. Otherwise I will leave it where it is.
Added a non-blocking version of ompi_comm_set to support ompi_comm_idup.
The call makes a recursive call to comm_dup and a non-blocking version
was needed. To simplify the code the blocking version calls the nonblocking
version and waits on the resulting request if one exists.
cmr=v1.7.4:reviewer=jsquyres:ticket=trac:3796
This commit was SVN r29334.
The following Trac tickets were found above:
Ticket 3796 --> https://svn.open-mpi.org/trac/ompi/ticket/3796
arrays.
The MPI 3.0 standard added const to all in buffers in the C bindings. This
commit adds the const keyword and in most cases casts const away. We will
eventually should go through and update the various interfaces (coll, pml,
io, etc) to take the const keyword. The group, comm, win, and datatype
interfaces have been updated with const.
cmr=v1.7.4:ticket=trac:3785:reviewer=jsquyres
This commit was SVN r29266.
The following Trac tickets were found above:
Ticket 3785 --> https://svn.open-mpi.org/trac/ompi/ticket/3785
Blocking versions are simple linear algorithms implemented in coll/basic. Non-
blocking versions are from libnbc 1.1.1. All algorithms have been tested with
simple test cases.
cmr=v1.7.4:reviewer=jsquyres
This commit was SVN r29265.
Add support for MPI_Count type and MPI_COUNT datatype and add the required
MPI-3 functions MPI_Get_elements_x, MPI_Status_set_elements_x,
MPI_Type_get_extent_x, MPI_Type_get_true_extent_x, and MPI_Type_size_x.
This commit adds only the C bindings. Fortran bindins will be added in
another commit. For now the MPI_Count type is define to have the same size
as MPI_Offset. The type is required to be at least as large as MPI_Offset
and MPI_Aint. The type was initially intended to be a ssize_t (if it was
the same size as a long long) but there were issues compiling romio with
that definition (despite the inclusion of stddef.h).
I updated the datatype engine to use size_t instead of uint32_t to support
large datatypes. This will require some review to make sure that 1) the
changes are beneficial, 2) nothing was broken by the change (I doubt
anything was), and 3) there are no performance regressions due to this
change.
Increase the maximum number of predifined datatypes to support MPI_Count
Put common get_elements code to ompi/datatype/ompi_datatype_get_elements.c
Update MPI_Get_count to reflect changes in MPI-3 (return MPI_UNDEFINED when the count is too large for an int)
This commit was SVN r28932.
