1
1
Граф коммитов

12 Коммитов

Автор SHA1 Сообщение Дата
Shiqing Fan
db747e4390 Remove the old timing parameter but using orte_timing instead. Thanks for Rainer.
This commit was SVN r22775.
2010-03-04 15:00:03 +00:00
Shiqing Fan
6ba25951b4 Add a separate function for reading remote registry, so that it could be easily reused.
Add two options for plm process module, i.e. remote_env_prefix for getting OMPI prefix on remote computer by reading its user environment variable (OPENMPI_HOME), and remote_reg_prefix is similar, but it reads the registry on the remote computer. Reading remote env prefix has a higher priority than reading reg prefix, so that user can use their own installation of OMPI.

This commit was SVN r21538.
2009-06-26 13:35:45 +00:00
Shiqing Fan
9bdf258d3c Add an initial support for remote process launch using WMI (Windows Management Instrumentation) in the environment where Windows 2003/2008 server and HPC pack are not installed. Users in a domain will be able to use domain computers as a cluster with their domain Credentials, the computers may run Windows XP or higher, e.g. Vista, and/or Windows 7 (later), with correct settings and permissions for WMI and Windows firewall.
This commit was SVN r21508.
2009-06-24 18:59:24 +00:00
Rainer Keller
221fb9dbca ... Delayed due to notifier commits earlier this day ...
- Delete unnecessary header files using
   contrib/check_unnecessary_headers.sh after applying
   patches, that include headers, being "lost" due to
   inclusion in one of the now deleted headers...

   In total 817 files are touched.
   In ompi/mpi/c/ header files are moved up into the actual c-file,
   where necessary (these are the only additional #include),
   otherwise it is only deletions of #include (apart from the above
   additions required due to notifier...)

 - To get different MCAs (OpenIB, TM, ALPS), an earlier version was
   successfully compiled (yesterday) on:
   Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
   Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
   Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled

This commit was SVN r21096.
2009-04-29 01:32:14 +00:00
Rainer Keller
04567d3af0 - Header orte/mca/errmgr/errmgr.h is not needed.
Once again compiles fine with -Wimplicit-function-declaration   

This commit was SVN r20640.
2009-02-26 04:05:30 +00:00
Rainer Keller
96e1b9b747 - Header orte/mca/rml/rml.h is not needed if no occurence of orte_rml
or ORTE_RML.
   As the others compiles fine with -Wimplicit-function-declaration

This commit was SVN r20639.
2009-02-26 03:52:31 +00:00
Shiqing Fan
3f6c64f2e3 Include a missing header,which was implicitly included and removed.
This commit was SVN r20563.
2009-02-16 12:38:38 +00:00
Jeff Squyres
0af7ac53f2 Fixes trac:1392, #1400
* add "register" function to mca_base_component_t
   * converted coll:basic and paffinity:linux and paffinity:solaris to
     use this function
   * we'll convert the rest over time (I'll file a ticket once all
     this is committed)
 * add 32 bytes of "reserved" space to the end of mca_base_component_t
   and mca_base_component_data_2_0_0_t to make future upgrades
   [slightly] easier
   * new mca_base_component_t size: 196 bytes
   * new mca_base_component_data_2_0_0_t size: 36 bytes
 * MCA base version bumped to v2.0
   * '''We now refuse to load components that are not MCA v2.0.x'''
 * all MCA frameworks versions bumped to v2.0
 * be a little more explicit about version numbers in the MCA base
   * add big comment in mca.h about versioning philosophy

This commit was SVN r19073.

The following Trac tickets were found above:
  Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
2008-07-28 22:40:57 +00:00
Jeff Squyres
671f0c379d Remove a whole pile of orte/util/show_help.h's that I missed. :-(
This commit was SVN r18437.
2008-05-14 11:32:33 +00:00
Jeff Squyres
e7ecd56bd2 This commit represents a bunch of work on a Mercurial side branch. As
such, the commit message back to the master SVN repository is fairly
long.

= ORTE Job-Level Output Messages =

Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):

 * orte_output(): (and corresponding friends ORTE_OUTPUT,
   orte_output_verbose, etc.)  This function sends the output directly
   to the HNP for processing as part of a job-specific output
   channel.  It supports all the same outputs as opal_output()
   (syslog, file, stdout, stderr), but for stdout/stderr, the output
   is sent to the HNP for processing and output.  More on this below.
 * orte_show_help(): This function is a drop-in-replacement for
   opal_show_help(), with two differences in functionality:
   1. the rendered text help message output is sent to the HNP for
      display (rather than outputting directly into the process' stderr
      stream)
   1. the HNP detects duplicate help messages and does not display them
      (so that you don't see the same error message N times, once from
      each of your N MPI processes); instead, it counts "new" instances
      of the help message and displays a message every ~5 seconds when
      there are new ones ("I got X new copies of the help message...")

opal_show_help and opal_output still exist, but they only output in
the current process.  The intent for the new orte_* functions is that
they can apply job-level intelligence to the output.  As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.

=== New code ===

For ORTE and OMPI programmers, here's what you need to do differently
in new code:

 * Do not include opal/util/show_help.h or opal/util/output.h.
   Instead, include orte/util/output.h (this one header file has
   declarations for both the orte_output() series of functions and
   orte_show_help()).
 * Effectively s/opal_output/orte_output/gi throughout your code.
   Note that orte_output_open() takes a slightly different argument
   list (as a way to pass data to the filtering stream -- see below),
   so you if explicitly call opal_output_open(), you'll need to
   slightly adapt to the new signature of orte_output_open().
 * Literally s/opal_show_help/orte_show_help/.  The function signature
   is identical.

=== Notes ===

 * orte_output'ing to stream 0 will do similar to what
   opal_output'ing did, so leaving a hard-coded "0" as the first
   argument is safe.
 * For systems that do not use ORTE's RML or the HNP, the effect of
   orte_output_* and orte_show_help will be identical to their opal
   counterparts (the additional information passed to
   orte_output_open() will be lost!).  Indeed, the orte_* functions
   simply become trivial wrappers to their opal_* counterparts.  Note
   that we have not tested this; the code is simple but it is quite
   possible that we mucked something up.

= Filter Framework =

Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr.  The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations.  The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc.  This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).

Filtering is not active by default.  Filter components must be
specifically requested, such as:

{{{
$ mpirun --mca filter xml ...
}}}

There can only be one filter component active.

= New MCA Parameters =

The new functionality described above introduces two new MCA
parameters:

 * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
   help messages will be aggregated, as described above.  If set to 0,
   all help messages will be displayed, even if they are duplicates
   (i.e., the original behavior).
 * '''orte_base_show_output_recursions''': An MCA parameter to help
   debug one of the known issues, described below.  It is likely that
   this MCA parameter will disappear before v1.3 final.

= Known Issues =

 * The XML filter component is not complete.  The current output from
   this component is preliminary and not real XML.  A bit more work
   needs to be done to configure.m4 search for an appropriate XML
   library/link it in/use it at run time.
 * There are possible recursion loops in the orte_output() and
   orte_show_help() functions -- e.g., if RML send calls orte_output()
   or orte_show_help().  We have some ideas how to fix these, but
   figured that it was ok to commit before feature freeze with known
   issues.  The code currently contains sub-optimal workarounds so
   that this will not be a problem, but it would be good to actually
   solve the problem rather than have hackish workarounds before v1.3 final.

This commit was SVN r18434.
2008-05-13 20:00:55 +00:00
Josh Hursey
9971bc9d95 Merge in the mca_base_select changes per RFC:
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php

{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}

Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.

Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.

This commit was SVN r18381.
2008-05-06 18:08:45 +00:00
Ralph Castain
d70e2e8c2b Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately.
Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer

This commit was SVN r17632.
2008-02-28 01:57:57 +00:00