When the node regex is too long to be sent on the command line,
retrieve it first from the parent, and then spawn the remote orted
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
to choose the first available non-socket provider.
modified: orte/mca/rml/ofi/rml_ofi_component.c
modified: orte/mca/rml/ofi/rml_ofi_send.c
Signed-off-by: Anandhi Jayakumar <anandhi.s.jayakumar@intel.com>
* Resolves#3705
* Components should link against the project level library to better
support `dlopen` with `RTLD_LOCAL`.
* Extend the `mca_FRAMEWORK_COMPONENT_la_LIBADD` in the `Makefile.am`
with the appropriate project level library:
```
MCA components in ompi/
$(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
MCA components in orte/
$(top_builddir)/orte/lib@ORTE_LIB_PREFIX@open-rte.la
MCA components in opal/
$(top_builddir)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
MCA components in oshmem/
$(top_builddir)/oshmem/liboshmem.la"
```
Note: The changes in this commit were automated by the script in
the commit that proceeds it with the `libadd_mca_comp_update.py`
script. Some components were not included in this change because
they are statically built only.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
passed to make it all flow thru the opal/pmix "put/get" operations. Update the PMIx code to latest master to pickup some required behaviors.
Remove the no-longer-required get_contact_info and set_contact_info from the RML layer.
Add an MCA param to allow the ofi/rml component to route messages if desired. This is mainly for experimentation at this point as we aren't sure if routing wi
ll be beneficial at large scales. Leave it "off" by default.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(1) rml_ofi_transports mca parameter. This parameter should have the list of transports (currently ethernet,fabric are valid)
fabric is higher priority if provided.
(2) ORTE_RML_TRANSPORT_TYPE key with values "ethernet" or "fabric". "fabric" is higher priority.
If specific provider is required use ORTE_RML_OFI_PROV_NAME key with values "socket" or "OPA" or any other supported in system.
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
On send_msg choose the provider on local and peer to follow below rules -
1. if the user specified the transport for this conduit (even giving us a prioritized list of candidates), then the one we selected is the _only_ one we will use. If the remote peer has a matching endpoint, then we use it - otherwise, we error out
2. if the user didn't specify a transport, then we look for matches against _all_ of our available transports, starting with fabric and then going to Ethernet, taking the first one that matches.
3. if we can't find any match, then we error out
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
send_msg() -> Fixed case when the local provider chosen at time of opening conduit
is not present in peer (destination) node
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
When opening conduit, checking for the transport preference in below order -
(1) rml_ofi_transports mca parameter. This parameter should have the list of transports (currently ethernet,fabric are valid)
fabric is higher priority if provided.
(2) ORTE_RML_TRANSPORT_TYPE key with values "ethernet" or "fabric". "fabric" is higher priority.
If specific provider is required use ORTE_RML_OFI_PROV_NAME key with values "socket" or "OPA" or any other supported in system.
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
On send_msg choose the provider on local and peer to follow below rules -
1. if the user specified the transport for this conduit (even giving us a prioritized list of candidates), then the one we selected is the _only_ one we will use. If the remote peer has a matching endpoint, then we use it - otherwise, we error out
2. if the user didn't specify a transport, then we look for matches against _all_ of our available transports, starting with fabric and then going to Ethernet, taking the first one that matches.
3. if we can't find any match, then we error out
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
send_msg() -> Fixed case when the local provider chosen at time of opening conduit
is not present in peer (destination) node
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Signed-off-by: Anandhi Jayakumar <anandhi.s.jayakumar@intel.com>
Remove the opal_ignore from the RML/OFI component, but disable that component unless the user specifically requests it via the "rml_ofi_desired=1" MCA param. This will let us test compile in various environments without interfering with operations while we continue to debug
Fix an error when computing the number of infos during server init
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This now passes the loop test, and so we believe it resolves the random hangs in finalize.
Changes in PMIx master that are included here:
* Fixed a bug in the PMIx_Get logic
* Fixed self-notification procedure
* Made pmix_output functions thread safe
* Fixed a number of thread safety issues
* Updated configury to use 'uname -n' when hostname is unavailable
Work on cleaning up the event handler thread safety problem
Rarely used functions, but protect them anyway
Fix the last part of the intercomm problem
Ensure we don't cover any PMIx calls with the framework-level lock.
Protect against NULL argv comm_spawn
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Cleanup the way we look for matching OFI addresses by using the opal_net_samenetwork helper function. This now works for multi-network environments, but only using the socket provider
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This PR renames the common library for OFI libfabric from
libfabric to ofi. There are a number of reasons this
is good to do:
1) its shorter and replaces 9 characters with three for
function names for what may eventually be a fairly extensive interface
2) OFI is the term used for MTL and RML components that use
the OFI libfabric interface
3) A planned OSC component will also use the OFI term.
4) Other HPC libraries that can use OFI libfabric tend to use
the term "ofi" internally and also in their configure options
relevant to OFI libfabric (i.e. MPICH/CH4, Intel MPI, Sandia SHMEM)
There seem to be comments in places in the Open MPI source
code that indicate that this common library will be going away.
Far from it as we will want to be able to share things like
AV objects between OMPI and possibly OSHMEM components that
use the OFI libfabric interface.
This PR also adds a synonym to the --with-libfabric(-libdir)
configury options: --with-ofi and with-ofi-libdir.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
onto the backend daemons. By default, let mpirun only pack the app_context
info and send that to the backend daemons where the mapping will
be done. This significantly reduces the computational time on mpirun as it isn't
running up/down the topology tree computing thousands of binding
locations, and it reduces the launch message to a very small number of
bytes.
When running -novm, fall back to the old way of doing things
where mpirun computes the entire map and binding, and then sends
the full info to the backend daemon.
Add a new cmd line option/mca param --fwd-mpirun-port that allows
mpirun to dynamically select a port, but then passes that back to
all the other daemons so they will use that port as a static port
for their own wireup. In this mode, we no longer "phone home" directly
to mpirun, but instead use the static port to wireup at daemon
start. We then use the routing tree to rollup the initial
launch report, and limit the number of open sockets on mpirun's node.
Update ras simulator to track the new nidmap code
Cleanup some bugs in the nidmap regex code, and enhance the error message for not enough slots to include the host on which the problem is found.
Update gadget platform file
Initialize the range count when starting a new range
Fix the no-np case in managed allocation
Ensure DVM node usage gets cleaned up after each job
Update scaling.pl script to use --fwd-mpirun-port. Pre-connect the daemon to its parent during launch while we are otherwise waiting for the daemon's children to send their "phone home" rollup messages
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Fix static port wireup by recording the TCP port mpirun is using and correctly passing the regex of hosts to the daemons. Do a better job of closing sockets on failed connection attempts. Correctly identify the remote host in the associated error message.
Fix partial allocation operations by not attempting to set #slots on nodes that were not used, and thus don't have a daemon or topology assigned to them
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Repair rsh/ssh tree spawn by unpacking and updating the nidmap in remote_spawn.
Add more specific error messages so the cause of a messaging problem is a little clearer. Remove some stale code. Ensure we stop trying to send a message after a few times.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Cleanup a typo, and remove no longer needed MCA params for hetero nodes and hetero apps. Hetero nodes will always be automatically detected. We don't support a mix of 32 and 64 bit apps
Modify the orte_node_t to use orte_topology_t instead of hwloc_topology_t, updating all the places that use it. Ensure that we properly update topology when we see a different one on a compute node.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/base/rml_base_stubs.c
deleted: ../orte/mca/rml/ofi/.opal_ignore
modified: ../orte/mca/rml/ofi/Makefile.am
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
modified: ../orte/test/system/ofi_conduit_stress.c
Removed stale include directive
modified: ../orte/mca/rml/ofi/Makefile.am
The ofi plugin supports multiple providers, and identifies them
by ofi_prov_id, changed the previous name conduit_id to ofi_prov_id
modified: ../orte/mca/rml/base/base.h
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_request.h
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Adding ofi plugin to allow for opening a conduit to use ethernet/fabric.
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/base/rml_base_stubs.c
deleted: ../orte/mca/rml/ofi/.opal_ignore
modified: ../orte/mca/rml/ofi/Makefile.am
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
modified: ../orte/test/system/ofi_conduit_stress.c
Removed stale include directive
modified: ../orte/mca/rml/ofi/Makefile.am
The ofi plugin supports multiple providers, and identifies them
by ofi_prov_id, changed the previous name conduit_id to ofi_prov_id
modified: ../orte/mca/rml/base/base.h
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_request.h
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Fixed merge issues, and minor pull-request comments
modified: ../orte/mca/rml/base/base.h
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Adding ofi plugin to allow for opening a conduit to use ethernet/fabric.
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/base/rml_base_stubs.c
deleted: ../orte/mca/rml/ofi/.opal_ignore
modified: ../orte/mca/rml/ofi/Makefile.am
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
modified: ../orte/test/system/ofi_conduit_stress.c
Removed stale include directive
modified: ../orte/mca/rml/ofi/Makefile.am
The ofi plugin supports multiple providers, and identifies them
by ofi_prov_id, changed the previous name conduit_id to ofi_prov_id
modified: ../orte/mca/rml/base/base.h
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_request.h
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Adding ofi plugin to allow for opening a conduit to use ethernet/fabric.
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/base/rml_base_stubs.c
deleted: ../orte/mca/rml/ofi/.opal_ignore
modified: ../orte/mca/rml/ofi/Makefile.am
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
modified: ../orte/test/system/ofi_conduit_stress.c
Removed stale include directive
modified: ../orte/mca/rml/ofi/Makefile.am
Fixed merge issues, and minor pull-request comments
modified: ../orte/mca/rml/base/base.h
modified: ../orte/mca/rml/base/rml_base_frame.c
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Removed trailing space
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Cleaned up test- ofi_conduit_stress.c
modified: ../orte/test/system/ofi_conduit_stress.c
cleaned up printing the provider info during initialisation
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Fixing warnings
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
minor cleanup
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
more cleanup
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Sending the ethernet address only in the get_contact_info, rest will be sent through modex
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Adding error logging on failures
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Handling the OPAL_MODEX_SEND/RECV generically for all ofi providers.
modified: ../orte/mca/rml/ofi/rml_ofi.h
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
modified: ../orte/mca/rml/ofi/rml_ofi_send.c
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Adding to build ofi for limited people
new file: ../orte/mca/rml/ofi/.opal_ignore
new file: ../orte/mca/rml/ofi/.opal_unignore
Signed-off-by: Anandhi S Jayakumar <anandhi.s.jayakumar@intel.com>
Removign the error logging for now
modified: ../orte/mca/rml/ofi/rml_ofi_component.c
Still not completely done as we need a better way of tracking the routed module being used down in the OOB - e.g., when a peer drops connection, we want to remove that route from all conduits that (a) use the OOB and (b) are routed, but we don't want to remove it from an OFI conduit.
Multiple conduits can exist at the same time, and can even point to the same base transport. Each conduit can have its own characteristics (e.g., flow control) based on the info keys provided to the "open_conduit" call. For ease during the transition period, the "legacy" RML interfaces remain as wrappers over the new conduit-based APIs using a default conduit opened during orte_init - this default conduit is tied to the OOB framework so that current behaviors are preserved. Once the transition has been completed, a one-time cleanup will be done to update all RML calls to the new APIs and the "legacy" interfaces will be deleted.
While we are at it: Remove oob/usock component to eliminate the TMPDIR length problem - get all working, including oob_stress
If requested, obtain stacktraces for each application process and report it to stderr upon timeout
stack traces: minor improvements
- Also include the hostname and PID of the each process for which
we're sending the stack traces (vs. just including the ORTE process
name)
- Send a specific error message if we couldn't find "gstack" in the
$PATH (e.g., on OS X)
- Send a sepcific error message if gstack fails to run
- Print a message that obtaining the stack traces may take a few
seconds so that users don't wonder what's happening
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
help-orterun.txt: minor tweaks
Trivial update: show "--timeout" (instead of "-timeout") in the help
message, just to encourage the use of double-dash options.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
trivial: stacktrace -> stack trace
Trivial word smything.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
