C++ compiler in configure. If we have a C++ compiler, then the MPI
C++ bindings are built by default. If we don't have a C++ compiler,
then the MPI C++ bindings are not built by default.
--enable-mpi-cxx will now force an error if there is no C++ compiler
available. --disable-mpi-cxx (or the lack of a C++ compiler) will now
disable many of the C++ compiler checks in configure.
Note that there are a few items to clean up regarding the difference
between C's _Bool type and C++'s bool type. Right now, we assume that
they are the same. But they aren't, and they shouldn't be treated as
such. This cleanup will be forced in MPI-2.2 with the introduction of
the MPI_C_BOOL MPI datatype.
This commit was SVN r21755.
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
not end up in OPAL
- Will post an updated patch for the OMPI_ALIGNMENT_ parts (within C).
This commit was SVN r21342.
The following SVN revision numbers were found above:
r21330 --> open-mpi/ompi@95596d1814
into the OPAL namespace, eliminating cases like opal/util/arch.c
testing for ompi_fortran_logical_t.
As this is processor- and compiler-related information
(e.g. does the compiler/architecture support REAL*16)
this should have been on the OPAL layer.
- Unifies f77 code using MPI_Flogical instead of opal_fortran_logical_t
- Tested locally (Linux/x86-64) with mpich and intel testsuite
but would like to get this week-ends MTT output
- PLEASE NOTE: configure-internal macro-names and
ompi_cv_ variables have not been changed, so that
external platform (not in contrib/) files still work.
This commit was SVN r21330.
MPI_MAX_PROCESSOR_NAME
MPI_MAX_ERROR_STRING
MPI_MAX_OBJECT_NAME
MPI_MAX_INFO_KEY
MPI_MAX_INFO_VAL
MPI_MAX_PORT_NAME
MPI_MAX_DATAREP_STRING
Defaults stay as theyr currently are -- and now give an explanation on the
min/max values being used in a central place...
m4-macro _OPAL_WITH_OPTION_MIN_MAX_VALUE may be benefical in other parts
of the configure system.
- We need some of these in the lower level OPAL for an upcoming commit!
All other levels base their values on them.
This commit was SVN r21292.
functionality (per MPI-2.1). This warning can be toggled using
--enable-mpi-interface-warning (default OFF), but can be
selectively turned on passing
mpicc -DOMPI_WANT_MPI_INTERFACE_WARNING
Using icc, gcc < 4.5, warnings (such as in mpi2basic_tests) show:
type_vector.c:83: warning: ‘MPI_Type_hvector’ is deprecated
(declared at /home/../usr/include/mpi.h:1379)
Using gcc-4.5 (gcc-svn) these show up as:
type_vector.c:83: warning: ‘MPI_Type_hvector’ is deprecated
(declared at /home/../usr/include/mpi.h:1379):
MPI_Type_hvector is superseded by MPI_Type_create_hvector in MPI-2.0
Jeff and I propose to turn such warnings on with Open MPI-1.7 by default.
- Detection of user-level compiler is handled using the preprocessor
checks of GASnet's other/portable_platform.h (thanks to Paul Hargrove
and Dan Bonachea) adapted into ompi/include/mpi_portable_platform.h
(see comments).
The OMPI-build time detection is output (Familyname and Version)
with ompi_info.
This functionality (actually any upcoming __attribute__) are turned
off, if a different compiler (and version) is being detected.
- Note, that any warnings regarding (user-compiler!=build-compiler)
as discussed in the RFC are _not_ included for now.
- Tested on Linux with --enable-mpi-interface-warning on
Linux, gcc-4.5 (deprecated w/ specific msg)
Linux, gcc-4.3 (deprecated w/o specific msg)
Linux, pathscale 3.1 (deprecated w/o specific msg)
Linux, icc-11.0 (deprecated w/o specific msg)
Linux, PGI-8.0.6 accepts __deprecated__ but does not issue a warning,
further investigation needed...
This commit was SVN r21262.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
Adapt orte_process_info to orte_proc_info, and
change orte_proc_info() to orte_proc_info_init().
- Compiled on linux-x86-64
- Discussed with Ralph
This commit was SVN r20739.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
* New "op" MPI layer framework
* Addition of the MPI_REDUCE_LOCAL proposed function (for MPI-2.2)
= Op framework =
Add new "op" framework in the ompi layer. This framework replaces the
hard-coded MPI_Op back-end functions for (MPI_Op, MPI_Datatype) tuples
for pre-defined MPI_Ops, allowing components and modules to provide
the back-end functions. The intent is that components can be written
to take advantage of hardware acceleration (GPU, FPGA, specialized CPU
instructions, etc.). Similar to other frameworks, components are
intended to be able to discover at run-time if they can be used, and
if so, elect themselves to be selected (or disqualify themselves from
selection if they cannot run). If specialized hardware is not
available, there is a default set of functions that will automatically
be used.
This framework is ''not'' used for user-defined MPI_Ops.
The new op framework is similar to the existing coll framework, in
that the final set of function pointers that are used on any given
intrinsic MPI_Op can be a mixed bag of function pointers, potentially
coming from multiple different op modules. This allows for hardware
that only supports some of the operations, not all of them (e.g., a
GPU that only supports single-precision operations).
All the hard-coded back-end MPI_Op functions for (MPI_Op,
MPI_Datatype) tuples still exist, but unlike coll, they're in the
framework base (vs. being in a separate "basic" component) and are
automatically used if no component is found at runtime that provides a
module with the necessary function pointers.
There is an "example" op component that will hopefully be useful to
those writing meaningful op components. It is currently
.ompi_ignore'd so that it doesn't impinge on other developers (it's
somewhat chatty in terms of opal_output() so that you can tell when
its functions have been invoked). See the README file in the example
op component directory. Developers of new op components are
encouraged to look at the following wiki pages:
https://svn.open-mpi.org/trac/ompi/wiki/devel/Autogenhttps://svn.open-mpi.org/trac/ompi/wiki/devel/CreateComponenthttps://svn.open-mpi.org/trac/ompi/wiki/devel/CreateFramework
= MPI_REDUCE_LOCAL =
Part of the MPI-2.2 proposal listed here:
https://svn.mpi-forum.org/trac/mpi-forum-web/ticket/24
is to add a new function named MPI_REDUCE_LOCAL. It is very easy to
implement, so I added it (also because it makes testing the op
framework pretty easy -- you can do it in serial rather than via
parallel reductions). There's even a man page!
This commit was SVN r20280.
* Add OMPI_F77_CHECK_REAL16_C_EQUV test whether REAL*16 is bit
equivalent to long double. AC_DEFINE OMPI_REAL16_MATCHES_C with
result (0 or 1).
* Update ompi_info to only show real16 support if
OMPI_REAL16_MATCHES_C is 1.
* Update DDT to only support REAL16 and COMPLEX32 if
1==OMPI_REAL16_MATCHES_C.
* MPI Op function pointer tabls will have NULL for the REAL16 and
COMPLEX32 entries if 0==OMPI_REAL16_MATCHES_C.
* Slightly cleaned up OMPI_F77_GET_ALIGNMENT and OMPI_F77_CHECK m4
tests (use OMPI_VAR_SCOPE_PUSH/POP).
This commit was SVN r19948.
The following Trac tickets were found above:
Ticket 1603 --> https://svn.open-mpi.org/trac/ompi/ticket/1603
* Make the creation of the build dir for the man pages a bit more
robust (thanks to suggestions from Ralf W.).
* Only distribute the .Xin files, not the .X man pages themselves.
* Make the .X files depend on opal_config.h so that if you re-run
configure and change opal_config.h (e.g., a new version), the man
pages should get rebuilt.
* Man pages are now cleaned with "distclean", not "maintainer-clean".
* Fix a typo in opal_crs.7in.
* Udpate make_dist_tarball to update "date" in the VERSION file.
* Make make_dist_tarball a bit friendlier to hg checkouts.
This commit was SVN r19219.
versions, dates and build names.
Fixes trac:1387
Big thanks to Jeff and Brian for help and oversight.
This commit was SVN r19120.
The following Trac tickets were found above:
Ticket 1387 --> https://svn.open-mpi.org/trac/ompi/ticket/1387
put the name of the file that set them if they were set by file. This is of great assistance to support personnel trying to understand why a user is having pro
blems.
Coordinated with Jeff.
This commit was SVN r19111.
environment, file, or API override).
Refs trac:1397
This commit was SVN r18943.
The following Trac tickets were found above:
Ticket 1397 --> https://svn.open-mpi.org/trac/ompi/ticket/1397
Lenny and I went back and forth on whether we should simply register
another "mpi_paffinity_alone" MCA param and then try to figure out
which one was set in ompi_mpi_init, but there was difficulty in
figuring out what to do. So it seemed like the Right Thing to do was
to implement what was committed in r18770; then we could tell where
MCA parameters were set from and you could do Better Things (this is
also useful in the openib BTL, where parameters can be set either via
MCA parameter or via an INI file).
But after that was done, it seemed only a few steps further to
actually implement two new features in the MCA params area:
* Synonyms (where one MCA param name is a synonym for another)
* Allow MCA params and/or their synonyms to be marked as "deprecated"
(printing out warnings if they are used)
These features have actually long been discussed/desired, and I had
some time in airports and airplanes recently where I could work in
this stuff on a standalone laptop. So I did it. :-)
This commit introduces these two new features, and then uses them to
register mpi_paffinity_alone as a non-deprecated synonym for
opal_paffinity_alone. A few other random points in this commit:
* Add a few error checks for conditions that were not checked before
* Correct some comments in mca_base_params.h
* Add a few comments in strategic places
* ompi_info now prints additional information:
* for any MCA parameter that has synonyms, it lists all the
synonyms
* synonyms are also output as 1st-class MCA params, but with an
additional attribute indicating that they have a "parent"
* all MCA param name (both "real" or "synonym") will output an
attribute indicating whether it is deprecated or not. A synonym
is deprecated if it iself is marked as deprecated (via the
mca_base_param_regist_syn() or mca_base_param_register_syn_name()
functions) or if its "parent" MCA parameter is deprecated
This commit was SVN r18859.
The following SVN revision numbers were found above:
r18770 --> open-mpi/ompi@8efe67e08c
The following Trac tickets were found above:
Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
